aria2/po/de.po

# translation of de.po to deutsch
# This file is distributed under the same license as the PACKAGE package.
# Copyright (C) YEAR Tatsuhiro Tsujikawa.
# Hermann J. Beckers <hj.beckers@onlinehome.de>, 2006.
#
msgid ""
msgstr ""
"Project-Id-Version: de\n"
"Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n"
"POT-Creation-Date: 2009-12-27 14:43+0900\n"
"PO-Revision-Date: 2009-12-06 18:07+0900\n"
"Last-Translator: adlerweb <Unknown>\n"
"Language-Team: deutsch <de@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2009-12-06 08:32+0000\n"
"X-Generator: Launchpad (build Unknown)\n"

#: src/DownloadEngine.cc:212
msgid ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."
msgstr ""
"Abbruch wurde eingeleitet... Strg-C drücken für sofortige Unterbrechung."

#: src/DownloadEngine.cc:218
msgid "Emergency shutdown sequence commencing..."
msgstr "Sofortiger Abbruch wurde eingeleitet..."

#: src/MultiUrlRequestInfo.cc:97
msgid "aria2 will resume download if the transfer is restarted."
msgstr ""
"aria2 wird den Download wiederaufnehmen, wenn die Übertragung neugestartet "
"wird."

#: src/MultiUrlRequestInfo.cc:99
msgid ""
"If there are any errors, then see the log file. See '-l' option in help/man "
"page for details."
msgstr ""
"Sollten Fehler aufgetreten sein, bitte die Mitschnitt-Datei beachten. Für "
"Details hierzu siehe die Option \"-l\" in den Hilfe- und man-Seiten."

#: src/RequestGroupMan.cc:578
msgid "Download Results:"
msgstr "Download-Ergebnisse:"

#: src/RequestGroupMan.cc:622
msgid "Status Legend:"
msgstr "Statuserläuterung:"

#: src/OptionHandler.cc:38
msgid "                              Default: "
msgstr "                              Voreinstellung: "

#: src/OptionHandler.cc:39
msgid "                              Tags: "
msgstr "                              Schlagwörter: "

#: src/OptionHandler.cc:40
msgid "                              Possible Values: "
msgstr "                              Mögliche Werte: "

#: src/OptionHandlerImpl.h:135
msgid "must be either 'true' or 'false'."
msgstr "muss entweder \"true\" (wahr) oder \"false\" (falsch) sein"

#: src/OptionHandlerImpl.h:169 src/OptionHandlerImpl.h:218
#, c-format
msgid "must be between %s and %s."
msgstr "muss zwischen %s und %s sein"

#: src/OptionHandlerImpl.h:215
#, c-format
msgid "must be smaller than or equal to %s."
msgstr "muss kleiner oder gleich %s sein"

#: src/OptionHandlerImpl.h:221
#, c-format
msgid "must be greater than or equal to %s."
msgstr "muss größer oder gleich %s sein"

#: src/OptionHandlerImpl.h:224 src/OptionHandlerImpl.h:302
msgid "must be a number."
msgstr "muss eine Zahl sein"

#: src/OptionHandlerImpl.h:293
#, c-format
msgid "must be smaller than or equal to %.1f."
msgstr "muss kleiner oder gleich %.1f sein."

#: src/OptionHandlerImpl.h:296
#, c-format
msgid "must be between %.1f and %.1f."
msgstr "muss zwischen %.1f und %.1f sein."

#: src/OptionHandlerImpl.h:299
#, c-format
msgid "must be greater than or equal to %.1f."
msgstr "muss größer oder gleich %.1f sein."

#: src/OptionHandlerImpl.h:477
msgid "must be one of the following:"
msgstr "muss eines der folgenden sein:"

#: src/OptionHandlerImpl.h:526 src/OptionHandlerImpl.h:569
msgid "unrecognized proxy format"
msgstr "unbekanntes Proxy-Format"

#: src/usage_text.h:37
msgid ""
" -d, --dir=DIR                The directory to store the downloaded file."
msgstr ""
" -d, --dir=DIR                Verzeichnis zum Speichern der abgerufenen "
"Datei."

#: src/usage_text.h:39
msgid " -o, --out=FILE               The file name of the downloaded file."
msgstr " -o, --out=FILE               Dateiname für die abgerufene Datei."

#: src/usage_text.h:41
msgid ""
" -l, --log=LOG                The file name of the log file. If '-' is\n"
"                              specified, log is written to stdout."
msgstr ""
" -l, --log=LOG                Dateipfad für die Log-Speicherung. Wenn '-' "
"angegeben wird,\n"
"                              wird das Log auf die Standardausgabe "
"geschrieben."

#: src/usage_text.h:44
msgid ""
" -D, --daemon                 Run as daemon. The current working directory "
"will\n"
"                              be changed to \"/\" and standard input, "
"standard\n"
"                              output and standard error will be redirected "
"to\n"
"                              \"/dev/null\"."
msgstr ""

#: src/usage_text.h:49
msgid ""
" -s, --split=N                Download a file using N connections. If more\n"
"                              than N URLs are given, first N URLs are used "
"and\n"
"                              remaining URLs are used for backup. If less "
"than\n"
"                              N URLs are given, those URLs are used more "
"than\n"
"                              once so that N connections total are made\n"
"                              simultaneously. Please see -j option too.\n"
"                              Please note that in Metalink download, this\n"
"                              option has no effect and use -C option instead."
msgstr ""

#: src/usage_text.h:58
msgid ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured."
msgstr ""
" --retry-wait=SEC             Festlegen der Sekundenanzahl SEC, die im "
"Fehler-\n"
"                              fall vor einem erneuten Versuch gewartet wird."

#: src/usage_text.h:61
msgid " -t, --timeout=SEC            Set timeout in seconds."
msgstr ""

#: src/usage_text.h:63
msgid " -m, --max-tries=N            Set number of tries. 0 means unlimited."
msgstr ""
" -m, --max-tries=N            Festlegen der maximalen Anzahl an Versuchen.\n"
"                              Keine Begrenzung mit 0."

#: src/usage_text.h:65
msgid ""
" --http-proxy=PROXY           Use this proxy server for HTTP.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""

#: src/usage_text.h:69
msgid ""
" --https-proxy=PROXY          Use this proxy server for HTTPS.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --https-proxy=PROXY          Diesen Proxy für HTTPS nutzen.\n"
"                              Siehe auch --all-proxy.\n"
"                              Dies betrifft  alle URLs."

#: src/usage_text.h:73
msgid ""
" --ftp-proxy=PROXY            Use this proxy server for FTP.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""

#: src/usage_text.h:77
msgid ""
" --all-proxy=PROXY            Use this proxy server for all protocols.\n"
"                              You can override this setting and specify a\n"
"                              proxy server for a particular protocol using\n"
"                              --http-proxy, --https-proxy and --ftp-proxy\n"
"                              options.\n"
"                              This affects all URLs."
msgstr ""

#: src/usage_text.h:84
msgid " --http-user=USER             Set HTTP user. This affects all URLs."
msgstr ""
" --http-user=USER             HTTP-Anwendername angeben. Dies betrifft alle "
"URLs."

#: src/usage_text.h:86
msgid " --http-passwd=PASSWD         Set HTTP password. This affects all URLs."
msgstr ""
" --http-passwd=PASSWD         HTTP-Passwort setzen. Dies betrifft alle URLs."

#: src/usage_text.h:88
msgid " --proxy-method=METHOD        Set the method to use in proxy request."
msgstr ""

#: src/usage_text.h:90
msgid " --referer=REFERER            Set Referer. This affects all URLs."
msgstr " --referer=REFERER            Referer setzen. Dies betrifft alle URLs."

#: src/usage_text.h:92
msgid " --ftp-user=USER              Set FTP user. This affects all URLs."
msgstr ""
" --ftp-user=BENUTZER          Festlegen des FTP-Benutzernamens. Wird für\n"
"                              alle URLs verwendet."

#: src/usage_text.h:94
msgid " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs."
msgstr ""
" --ftp-passwd=PASSWORT        Festlegen des FTP-Paßworts. Wird für\n"
"                              alle URLs verwendet."

#: src/usage_text.h:96
msgid " --ftp-type=TYPE              Set FTP transfer type."
msgstr " --ftp-type=TYP               Festlegen des FTP-Übertragungstyps."

#: src/usage_text.h:98
msgid ""
" -p, --ftp-pasv[=true|false]  Use the passive mode in FTP. If false is "
"given,\n"
"                              the active mode will be used."
msgstr ""

#: src/usage_text.h:101
msgid ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads."
msgstr ""

#: src/usage_text.h:107
msgid ""
" --max-overall-download-limit=SPEED Set max overall download speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the download speed per download, use\n"
"                              --max-download-limit option."
msgstr ""

#: src/usage_text.h:113
msgid ""
" --max-download-limit=SPEED   Set max download speed per each download in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall download speed, use\n"
"                              --max-overall-download-limit option."
msgstr ""

#: src/usage_text.h:119
msgid ""
" --file-allocation=METHOD     Specify file allocation method.\n"
"                              'none' doesn't pre-allocate file space. "
"'prealloc'\n"
"                              pre-allocates file space before download "
"begins.\n"
"                              This may take some time depending on the size "
"of\n"
"                              the file.\n"
"                              If you are using newer file systems such as "
"ext4\n"
"                              (with extents support), btrfs or xfs, 'falloc' "
"is\n"
"                              your best choice. It allocates large(few GiB)\n"
"                              files almost instantly. Don't use 'falloc' "
"with\n"
"                              legacy file systems such as ext3 because it "
"takes\n"
"                              almost same time as 'prealloc' and it blocks "
"aria2\n"
"                              entirely until allocation finishes. 'falloc' "
"may\n"
"                              not be available if your system doesn't have\n"
"                              posix_fallocate() function."
msgstr ""

#: src/usage_text.h:134
msgid ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --no-file-allocation-limit=SIZE Es wird keine Platzvorbelegung für Dateien\n"
"                              vorgenommen, die kleiner als SIZE sind. Man\n"
"                              kann K oder M an den Wert anhängen (1K = "
"1024,\n"
"                              1M = 1024K)."

#: src/usage_text.h:138
msgid ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"
msgstr ""

#: src/usage_text.h:142
msgid ""
" --allow-overwrite=true|false If false is given, and a file already exists "
"but\n"
"                              the corresponding control file (filename."
"aria2)\n"
"                              doesn't exist, then aria2 will not re-"
"download\n"
"                              the file. See also --auto-file-renaming option."
msgstr ""

#: src/usage_text.h:147
msgid ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."
msgstr ""

#: src/usage_text.h:152
msgid ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities."
msgstr ""

#: src/usage_text.h:156
msgid ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended."
msgstr ""

#: src/usage_text.h:162
msgid ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required."
msgstr ""

#: src/usage_text.h:173
msgid ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection."
msgstr ""
" --enable-http-keep-alive[=true|false]  Dauerhafte HTTP/1.1-Verbindung "
"halten."

#: src/usage_text.h:175
msgid " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining."
msgstr ""

#: src/usage_text.h:177
msgid ""
" -V, --check-integrity[=true|false] Check file integrity by validating "
"piece\n"
"                              hashes. This option has effect only in "
"BitTorrent\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file. See also --bt-hash-check-seed "
"option."
msgstr ""

#: src/usage_text.h:183
msgid ""
" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n"
"                              --check-integrity option and file is "
"complete,\n"
"                              continue to seed file. If you want to check "
"file\n"
"                              and download it only when it is damaged or\n"
"                              incomplete, set this option to false.\n"
"                              This option has effect only on BitTorrent\n"
"                              download."
msgstr ""

#: src/usage_text.h:191
msgid ""
" --realtime-chunk-checksum=true|false  Validate chunk of data by "
"calculating\n"
"                              checksum while downloading a file if chunk\n"
"                              checksums are provided."
msgstr ""

#: src/usage_text.h:195
msgid ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."
msgstr ""
" -c, --continue   Den Download einer teilweise heruntergeladenen Datei "
"fort-\n"
"                              setzen. Unvollständige Downloads, die von\n"
"                              Programmen begonnen wurden, die Dateien "
"linear\n"
"                              von Anfang nach Ende herunterladen (z. B. "
"Web-\n"
"                              Browser), können mit dieser Option "
"fortgeführt\n"
"                              werden.\n"
"                              Im Moment ist diese Option nur für HTTP(S) "
"und\n"
"                              FTP verfügbar."

#: src/usage_text.h:202
msgid " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."
msgstr ""

#: src/usage_text.h:204
msgid " -n, --no-netrc               Disables netrc support."
msgstr " -n, --no-netrc               Deaktiviert netrc Unterstützung."

#: src/usage_text.h:206
msgid ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when '-' is specified.\n"
"                              The additional out and dir options can be\n"
"                              specified after each line of URIs. This "
"optional\n"
"                              line must start with white space(s). See "
"INPUT\n"
"                              FILE section of man page for details."
msgstr ""

#: src/usage_text.h:215
msgid ""
" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads "
"for\n"
"                              every static (HTTP/FTP) URL, torrent and "
"metalink.\n"
"                              See also -s and -C options."
msgstr ""

#: src/usage_text.h:219
msgid ""
" --load-cookies=FILE          Load Cookies from FILE using the Firefox3 "
"format\n"
"                              and Mozilla/Firefox(1.x/2.x)/Netscape format."
msgstr ""

#: src/usage_text.h:222
msgid ""
" --save-cookies=FILE          Save Cookies to FILE in Mozilla/Firefox(1.x/2."
"x)/\n"
"                              Netscape format. If FILE already exists, it "
"is\n"
"                              overwritten. Session Cookies are also saved "
"and\n"
"                              their expiry values are treated as 0."
msgstr ""

#: src/usage_text.h:227
msgid ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."
msgstr ""
" -S, --show-files             Listenanzeige aller Download-Positionen\n"
"                              in einer .torrent- oder .metalink-Datei. Für\n"
"                              .torrent werden genauere Informationen "
"angezeigt."

#: src/usage_text.h:231
msgid ""
" --select-file=INDEX...       Set file to download by specifying its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: \"3,6\".\n"
"                              You can also use '-' to specify a range: \"1-5"
"\".\n"
"                              ',' and '-' can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."
msgstr ""

#: src/usage_text.h:240
msgid " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."
msgstr " -T, --torrent-file=TORRENT_FILE  Datenpfad zur torrent-Datei."

#: src/usage_text.h:242
msgid ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""
" --follow-torrent=true|false|mem  Für Angabe von \"true\" oder \"mem\" wird "
"nach\n"
"                              dem Download einer .torrent-Datei oder einer "
"Da-\n"
"                              tei, deren Inhaltstyp \"application/x-"
"bittorrent\"\n"
"                              ist, diese Datei als Torrent-Steuerdatei "
"durch-\n"
"                              sucht und alle gefundenen Download-Positionen\n"
"                              heruntergeladen.\n"
"                              Für \"mem\" wird die .torrent-Datei nicht auf\n"
"                              der Festplatte gespeichert, sondern nur im \n"
"                              Speicher gehalten.\n"
"                              Bei \"false\" wird die .torrent-Datei nicht\n"
"                              durchsucht."

#: src/usage_text.h:252
msgid ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file."
msgstr ""

#: src/usage_text.h:255
msgid ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""
" --listen-port=PORT           Setzen des TCP-Ports für BitTorrent-"
"Downloads.\n"
"                              Mehrere Ports können mit Kommatrennung "
"angegeben\n"
"                              werden (Bsp: \"6881,6885\"). Mit \"-\" kann "
"ein\n"
"                              Port-Bereich angegeben werden (Bsp: \"6881-6999"
"\").\n"
"                              \",\" und \"-\" können gemeinsam benutzt "
"werden."

#: src/usage_text.h:261
msgid ""
" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the upload speed per torrent, use\n"
"                              --max-upload-limit option."
msgstr ""

#: src/usage_text.h:267
msgid ""
" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall upload speed, use\n"
"                              --max-overall-upload-limit option."
msgstr ""

#: src/usage_text.h:273
msgid ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."
msgstr ""
" --seed-time=MINUTES          Legt die Verteilzeit in Minuten fest. Siehe "
"auch\n"
"                              die Option \"--seed-ratio\"."

#: src/usage_text.h:276
msgid ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO.\n"
"                              You are strongly encouraged to specify equals "
"or\n"
"                              more than 1.0 here. Specify 0.0 if you intend "
"to\n"
"                              do seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."
msgstr ""

#: src/usage_text.h:285
msgid ""
" --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20 bytes are\n"
"                              used. If less than 20 bytes are specified, "
"random\n"
"                              byte data are added to make its length 20 "
"bytes."
msgstr ""

#: src/usage_text.h:291
msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."
msgstr ""

#: src/usage_text.h:293
msgid " --enable-dht[=true|false]    Enable DHT functionality."
msgstr ""
" --enable-dht[=true|false]    Nutzung von DHT (VHT, Verteilte Hash-Tabelle)\n"
"                              einschalten."

#: src/usage_text.h:295
msgid ""
" --dht-listen-port=PORT...    Set UDP listening port for DHT.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""
" --dht-listen-port=PORT   Bestimmt den UDP-Lauschport für DHT.\n"
"                              Mehrere Ports können mit Kommatrennung "
"angegeben\n"
"                              werden (Bsp: \"6881,6885\"). Mit \"-\" kann "
"ein\n"
"                              Port-Bereich angegeben werden (Bsp: \"6881-6999"
"\").\n"
"                              \",\" und \"-\" können gemeinsam benutzt "
"werden."

#: src/usage_text.h:301
msgid ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to DHT\n"
"                              network."
msgstr ""
" --dht-entry-point=HOST:PORT  Festlegung von Wirt und Port, über den das "
"DHT-\n"
"                              Netzwerk betreten wird."

#: src/usage_text.h:304
msgid ""
" --dht-file-path=PATH         Change the DHT routing table file to PATH."
msgstr ""

#: src/usage_text.h:306
msgid ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses the lowest one which "
"satisfies\n"
"                              the given level."
msgstr ""

#: src/usage_text.h:311
msgid ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."
msgstr ""
" --bt-require-crypto=true|false  Falls \"true\" wird Aria2 keine "
"Verbindungen\n"
"                              mit herkömmlichem BitTorrent-Handshake auf-\n"
"                              bauen oder akzeptieren. Damit wird stets der\n"
"                              Verschleierungs-Handshake (\"Obfuscation\") "
"ver-\n"
"                              wendet."

#: src/usage_text.h:316
msgid ""
" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n"
"                              torrent is lower than SPEED, aria2 "
"temporarily\n"
"                              increases the number of peers to try for more\n"
"                              download speed. Configuring this option with "
"your\n"
"                              preferred download speed can increase your\n"
"                              download speed in some cases.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""

#: src/usage_text.h:324
msgid ""
" --bt-max-open-files=NUM      Specify maximum number of files to open in "
"each\n"
"                              BitTorrent download."
msgstr ""

#: src/usage_text.h:327
msgid ""
" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"
"                              verifying piece hashes."
msgstr ""

#: src/usage_text.h:330
msgid ""
" --bt-max-peers=NUM           Specify the maximum number of peers per "
"torrent.\n"
"                              0 means unlimited.\n"
"                              See also --bt-request-peer-speed-limit option."
msgstr ""

#: src/usage_text.h:334
#, fuzzy
msgid ""
" -M, --metalink-file=METALINK_FILE The file path to the .metalink file. "
"Reads\n"
"                              input from stdin when '-' is specified."
msgstr " -M, --metalink-file=METALINK_FILE  Datenpfad zur metalink-Datei."

#: src/usage_text.h:337
msgid ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously. Some Metalinks regulate the\n"
"                              number of servers to connect. aria2 strictly\n"
"                              respects them. This means that if Metalink "
"defines\n"
"                              the maxconnections attribute lower than\n"
"                              NUM_SERVERS, then aria2 uses the value of\n"
"                              maxconnections attribute instead of "
"NUM_SERVERS.\n"
"                              See also -s and -j options."
msgstr ""

#: src/usage_text.h:346
msgid " --metalink-version=VERSION   The version of the file to download."
msgstr " --metalink-version=VERSION   Die Version der Datei zum herunterladen."

#: src/usage_text.h:348
msgid " --metalink-language=LANGUAGE The language of the file to download."
msgstr " --metalink-language=LANGUAGE Die Sprache der Datei zum herunterladen."

#: src/usage_text.h:350
msgid ""
" --metalink-os=OS             The operating system of the file to download."
msgstr ""
" --metalink-os=OS             Das Betriebssystem der Datei zum herunterladen."

#: src/usage_text.h:352
msgid ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-delimited list of locations is\n"
"                              acceptable."
msgstr ""

#: src/usage_text.h:356
msgid ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify "
"'none'\n"
"                              if you don't have any preferred protocol."
msgstr ""

#: src/usage_text.h:359
msgid ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metalink or content type of\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:369
msgid ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."
msgstr ""
" --metalink-enable-unique-protocol=true|false  Wenn dies \"true\" ist und "
"für\n"
"                              einen Spiegelserver in der Metalink-"
"Steuerdatei\n"
"                              mehrere Protokolle verfügbar sind, wird Aria2\n"
"                              genau eines davon verwenden.\n"
"                              Siehe Option \"--metalink-preferred-protocol"
"\"\n"
"                              zur Festlegung des bevorzugten Protokolls."

#: src/usage_text.h:375
msgid " -v, --version                Print the version number and exit."
msgstr " -v, --version                Versionsnummer ausgeben und beenden."

#: src/usage_text.h:377
msgid ""
" -h, --help[=TAG|KEYWORD]     Print usage and exit.\n"
"                              The help messages are classified with tags. A "
"tag\n"
"                              starts with \"#\". For example, type \"--"
"help=#http\"\n"
"                              to get the usage for the options tagged with\n"
"                              \"#http\". If non-tag word is given, print the "
"usage\n"
"                              for the options whose name includes that word."
msgstr ""

#: src/usage_text.h:384
msgid " --no-conf                    Disable loading aria2.conf file."
msgstr " --no-conf                    Laden der aria2.conf-Datei unterbinden."

#: src/usage_text.h:386
msgid ""
" --conf-path=PATH             Change the configuration file path to PATH."
msgstr ""
" --conf-path=VERZEICHNIS      Ändern des Verzeichnisses für die "
"Konfigurations-\n"
"                              datei auf VERZEICHNIS."

#: src/usage_text.h:388
msgid ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."
msgstr ""
" --stop=SEC                   Anwendung nach Ablauf von SEC Sekunden "
"anhalten.\n"
"                              Bei 0 ist diese Funktion ausgeschaltet."

#: src/usage_text.h:391
msgid ""
" --header=HEADER              Append HEADER to HTTP request header. You can "
"use\n"
"                              this option repeatedly to specify more than "
"one\n"
"                              header:\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"
msgstr ""

#: src/usage_text.h:397
msgid " -q, --quiet[=true|false]     Make aria2 quiet(no console output)."
msgstr ""

#: src/usage_text.h:399
msgid " --async-dns[=true|false]     Enable asynchronous DNS."
msgstr " --async-dns[=true|false]     Asynchrone DNS ermöglichen."

#: src/usage_text.h:401
msgid " --ftp-reuse-connection[=true|false] Reuse connection in FTP."
msgstr ""
" --ftp-reuse-connection[=true|false]  Wiederverwenden bereits aufgebauter\n"
"                              FTP-Verbindungen."

#: src/usage_text.h:403
msgid ""
" --summary-interval=SEC       Set interval to output download progress "
"summary.\n"
"                              Setting 0 suppresses the output."
msgstr ""
" --summary-interval=SEC       Festlegen des Intervalls, in dem die Ausgabe "
"des\n"
"                              Download-Fortschritts aufgefrischt wird.\n"
"                              Mit 0 wird die Ausgabe unterbunden."

#: src/usage_text.h:406
msgid " --log-level=LEVEL            Set log level to output."
msgstr " --log-level=LEVEL  Auszugebende Mitschnittfülle festlegen."

#: src/usage_text.h:408
msgid ""
" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from "
"the\n"
"                              remote HTTP/FTP server and if it is "
"available,\n"
"                              apply it to the local file."
msgstr ""

#: src/usage_text.h:412
msgid ""
" --connect-timeout=SEC        Set the connect timeout in seconds to "
"establish\n"
"                              connection to HTTP/FTP/proxy server. After "
"the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --timeout option is used instead."
msgstr ""

#: src/usage_text.h:417
msgid ""
" --max-file-not-found=NUM     If aria2 receives `file not found' status from "
"the\n"
"                              remote HTTP/FTP servers NUM times without "
"getting\n"
"                              a single byte, then force the download to "
"fail.\n"
"                              Specify 0 to disable this option.\n"
"                              This options is effective only when using\n"
"                              HTTP/FTP servers."
msgstr ""

#: src/usage_text.h:424
msgid ""
" --uri-selector=SELECTOR      Specify URI selection algorithm.\n"
"                              If 'inorder' is given, URI is tried in the "
"order\n"
"                              appeared in the URI list.\n"
"                              If 'feedback' is given, aria2 uses download "
"speed\n"
"                              observed in the previous downloads and choose\n"
"                              fastest server in the URI list. This also\n"
"                              effectively skips dead mirrors. The observed\n"
"                              download speed is a part of performance "
"profile\n"
"                              of servers mentioned in --server-stat-of and\n"
"                              --server-stat-if options.\n"
"                              If 'adaptive' is given, selects one of the "
"best\n"
"                              mirrors for the first and reserved "
"connections.\n"
"                              For supplementary ones, it returns mirrors "
"which\n"
"                              has not been tested yet, and if each of them "
"has\n"
"                              already been tested, returns mirrors which has "
"to\n"
"                              be tested again. Otherwise, it doesn't select\n"
"                              anymore mirrors. Like 'feedback', it uses a\n"
"                              performance profile of servers."
msgstr ""

#: src/usage_text.h:443
msgid ""
" --server-stat-of=FILE        Specify the filename to which performance "
"profile\n"
"                              of the servers is saved. You can load saved "
"data\n"
"                              using --server-stat-if option."
msgstr ""

#: src/usage_text.h:447
msgid ""
" --server-stat-if=FILE        Specify the filename to load performance "
"profile\n"
"                              of the servers. The loaded data will be used "
"in\n"
"                              some URI selector such as 'feedback'.\n"
"                              See also --uri-selector option"
msgstr ""

#: src/usage_text.h:452
msgid ""
" --server-stat-timeout=SEC    Specifies timeout in seconds to invalidate\n"
"                              performance profile of the servers since the "
"last\n"
"                              contact to them."
msgstr ""

#: src/usage_text.h:456
msgid ""
" --auto-save-interval=SEC     Save a control file(*.aria2) every SEC "
"seconds.\n"
"                              If 0 is given, a control file is not saved "
"during\n"
"                              download. aria2 saves a control file when it "
"stops\n"
"                              regardless of the value."
msgstr ""

#: src/usage_text.h:461
msgid ""
" --certificate=FILE           Use the client certificate in FILE.\n"
"                              The certificate must be in PEM format.\n"
"                              You may use --private-key option to specify "
"the\n"
"                              private key."
msgstr ""

#: src/usage_text.h:466
msgid ""
" --private-key=FILE           Use the private key in FILE.\n"
"                              The private key must be decrypted and in PEM\n"
"                              format. See also --certificate option."
msgstr ""

#: src/usage_text.h:470
msgid ""
" --ca-certificate=FILE        Use the certificate authorities in FILE to "
"verify\n"
"                              the peers. The certificate file must be in "
"PEM\n"
"                              format and can contain multiple CA "
"certificates.\n"
"                              Use --check-certificate option to enable\n"
"                              verification."
msgstr ""

#: src/usage_text.h:476
msgid ""
" --check-certificate[=true|false] Verify the peer using certificates "
"specified\n"
"                              in --ca-certificate option."
msgstr ""

#: src/usage_text.h:479
msgid ""
" --no-proxy=DOMAINS           Specify comma separated hostnames or domains "
"where\n"
"                              proxy should not be used."
msgstr ""

#: src/usage_text.h:482
msgid ""
" --use-head[=true|false]      Use HEAD method for the first request to the "
"HTTP\n"
"                              server."
msgstr ""

#: src/usage_text.h:485
msgid " --event-poll=POLL            Specify the method for polling events."
msgstr ""

#: src/usage_text.h:487
msgid ""
" --xml-rpc-listen-port=PORT   Specify a port number for XML-RPC server to "
"listen\n"
"                              to."
msgstr ""

#: src/usage_text.h:490
msgid ""
" --enable-xml-rpc[=true|false] Enable XML-RPC server.\n"
"                              It is strongly recommended to set username "
"and\n"
"                              password using --xml-rpc-user and --xml-rpc-"
"passwd\n"
"                              option. See also --xml-rpc-listen-port option."
msgstr ""

#: src/usage_text.h:495
msgid ""
" --xml-rpc-max-request-size=SIZE Set max size of XML-RPC request. If aria2\n"
"                              detects the request is more than SIZE bytes, "
"it\n"
"                              drops connection."
msgstr ""

#: src/usage_text.h:499
msgid " --xml-rpc-user=USER          Set XML-RPC user."
msgstr ""

#: src/usage_text.h:501
msgid " --xml-rpc-passwd=PASSWD      Set XML-RPC password."
msgstr ""

#: src/usage_text.h:503
msgid ""
" --bt-external-ip=IPADDRESS   Specify the external IP address to report to "
"a\n"
"                              BitTorrent tracker. Although this function is\n"
"                              named 'external', it can accept any kind of "
"IP\n"
"                              addresses."
msgstr ""

#: src/usage_text.h:508
msgid ""
" --http-auth-challenge[=true|false] Send HTTP authorization header only when "
"it\n"
"                              is requested by the server. If false is set, "
"then\n"
"                              authorization header is always sent to the "
"server.\n"
"                              There is an exception: if username and "
"password\n"
"                              are embedded in URI, authorization header is\n"
"                              always sent to the server regardless of this\n"
"                              option."
msgstr ""

#: src/usage_text.h:516
msgid ""
" -O, --index-out=INDEX=PATH   Set file path for file with index=INDEX. You "
"can\n"
"                              find the file index using the --show-files "
"option.\n"
"                              PATH is a relative path to the path specified "
"in\n"
"                              --dir option. You can use this option "
"multiple\n"
"                              times."
msgstr ""

#: src/usage_text.h:522
msgid ""
" --dry-run[=true|false]       If true is given, aria2 just checks whether "
"the\n"
"                              remote file is available and doesn't download\n"
"                              data. This option has effect on HTTP/FTP "
"download.\n"
"                              BitTorrent downloads are canceled if true is\n"
"                              specified."
msgstr ""

#: src/usage_text.h:528
msgid ""
" --bt-tracker-interval=SEC    Set the interval in seconds between tracker\n"
"                              requests. This completely overrides interval "
"value\n"
"                              and aria2 just uses this value and ignores "
"the\n"
"                              min interval and interval value in the "
"response of\n"
"                              tracker. If 0 is set, aria2 determines "
"interval\n"
"                              based on the response of tracker and the "
"download\n"
"                              progress."
msgstr ""

#: src/usage_text.h:536
msgid ""
" --on-download-complete=COMMAND Set the command to be executed when "
"download\n"
"                              completes.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""

#: src/usage_text.h:542
msgid ""
" --on-download-start=COMMAND  Set the command to be executed when download\n"
"                              starts up. COMMAND must take just one argument "
"and\n"
"                              GID is passed to COMMAND as a first argument."
msgstr ""

#: src/usage_text.h:546
msgid ""
" --on-download-error=COMMAND  Set the command to be executed when download\n"
"                              aborts due to error.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""

#: src/usage_text.h:552
msgid ""
" --on-download-stop=COMMAND   Set the command to be executed when download\n"
"                              stops. You can override the command to be "
"executed\n"
"                              for particular download result using\n"
"                              --on-download-complete and --on-download-"
"error. If\n"
"                              they are specified, command specified in this\n"
"                              option is not executed.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""

#: src/usage_text.h:561
msgid ""
" --bt-stop-timeout=SEC        Stop BitTorrent download if download speed is "
"0 in\n"
"                              consecutive SEC seconds. If 0 is given, this\n"
"                              feature is disabled."
msgstr ""

#: src/usage_text.h:565
msgid ""
" --xml-rpc-listen-all[=true|false] Listen incoming XML-RPC requests on all\n"
"                              network interfaces. If false is given, listen "
"only\n"
"                              on local loopback interface."
msgstr ""

#: src/usage_text.h:569
msgid ""
" --bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and "
"last\n"
"                              pieces of each file first. This is useful for\n"
"                              previewing files. The argument can contain 2\n"
"                              keywords:head and tail. To include both "
"keywords,\n"
"                              they must be separated by comma. These "
"keywords\n"
"                              can take one parameter, SIZE. For example, if\n"
"                              head=SIZE is specified, pieces in the range "
"of\n"
"                              first SIZE bytes of each file get higher "
"priority.\n"
"                              tail=SIZE means the range of last SIZE bytes "
"of\n"
"                              each file. SIZE can include K or M(1K = 1024, "
"1M =\n"
"                              1024K). If SIZE is omitted, SIZE=1M is used."
msgstr ""

#: src/usage_text.h:581
msgid ""
" --interface=INTERFACE        Bind sockets to given interface. You can "
"specify\n"
"                              interface name, IP address and hostname."
msgstr ""

#: src/usage_text.h:584
msgid " --disable-ipv6[=true|false]  Disable IPv6."
msgstr ""

#: src/usage_text.h:586
msgid ""
" --bt-save-metadata[=true|false] Save metadata as .torrent file. This option "
"has\n"
"                              effect only when BitTorrent Magnet URI is "
"used.\n"
"                              The filename is hex encoded info hash with "
"suffix\n"
"                              .torrent. The directory to be saved is the "
"same\n"
"                              directory where download file is saved. If "
"the\n"
"                              same file already exists, metadata is not "
"saved."
msgstr ""

#: src/version_usage.cc:57
msgid " version "
msgstr " Version "

#: src/version_usage.cc:80
#, c-format
msgid "Report bugs to %s"
msgstr "Fehler an %s melden"

#: src/version_usage.cc:85
msgid ""
"Usage: aria2c [OPTIONS] [URI | MAGNET | TORRENT_FILE | METALINK_FILE]..."
msgstr ""

#: src/version_usage.cc:92
msgid "Printing all options."
msgstr "Ausgabe aller Optionen."

#: src/version_usage.cc:94
#, c-format
msgid "Printing options tagged with '%s'."
msgstr "Ausgabe von Optionen, die zum Stichwort '%s' passen."

#: src/version_usage.cc:98
#, c-format
msgid "See -h option to know other command-line options(%s)."
msgstr "Siehe Option -h für weitere Kommandozeilen-Optionen (%s)."

#: src/version_usage.cc:103 src/version_usage.cc:115
msgid "Options:"
msgstr "Optionen:"

#: src/version_usage.cc:112
#, c-format
msgid "Printing options whose name includes '%s'."
msgstr ""

#: src/version_usage.cc:120
#, c-format
msgid "No option matching with '%s'."
msgstr ""

#: src/version_usage.cc:128
#, fuzzy
msgid ""
" You can specify multiple HTTP(S)/FTP URIs. Unless you specify -Z option, "
"all\n"
" URIs must point to the same file or downloading will fail."
msgstr ""
" Sie können mehrere URLs angeben. Solange Sie nicht die -Z Option benutzen,\n"
" müssen alle URLs zur selben Datei zeigen, oder der Download schlägt fehl."

#: src/version_usage.cc:130
#, fuzzy
msgid ""
" You can also specify arbitrary number of BitTorrent Magnet URIs, torrent/\n"
" metalink files stored in a local drive. Please note that they are always\n"
" treated as a separate download."
msgstr ""
" Es kann auch eine beliebige Anzahl von Torrent- und Metalink-Dateien auf\n"
" einem lokalen Speichermedium angegeben werden. Dabei ist zu beachten, daß\n"
" diese stets als separater Download behandelt werden."

#: src/version_usage.cc:135
msgid ""
" You can specify both torrent file with -T option and URIs. By doing this,\n"
" download a file from both torrent swarm and HTTP/FTP server at the same "
"time,\n"
" while the data from HTTP/FTP are uploaded to the torrent swarm. For single "
"file\n"
" torrents, URI can be a complete URI pointing to the resource or if URI "
"ends\n"
" with '/', 'name' in torrent file is added. For multi-file torrents, 'name' "
"and\n"
" 'path' in torrent are added to form a URI for each file."
msgstr ""

#: src/version_usage.cc:142
#, fuzzy
msgid ""
" Make sure that URI is quoted with single(') or double(\") quotation if it\n"
" contains \"&\" or any characters that have special meaning in shell."
msgstr ""
" Bitte sicherstellen, daß eine URL von Apostrophen (') oder "
"Anführungszeichen\n"
" (\") umschlossen ist, wenn sie \"&\" oder andere Zeichen enthält, die auf "
"der\n"
" Kommandozeile eine besondere Bedeutung haben."

#: src/version_usage.cc:146
msgid "Refer to man page for more information."
msgstr "Für mehr Informationen, sehen Sie bitte in der man page nach."

#: src/message.h:40
#, c-format
msgid "CUID#%d - The download for one segment completed successfully."
msgstr "CUID#%d - Download eines Segments erfolgreich beendet."

#: src/message.h:41
#, c-format
msgid "CUID#%d - No segment available."
msgstr "CUID#%d - Kein Segment verfügbar."

#: src/message.h:42
#, c-format
msgid "CUID#%d - Connecting to %s:%d"
msgstr "CUID#%d - Verbinde mit %s:%d"

#: src/message.h:43
#, c-format
msgid ""
"CUID#%d - The segment changed. We send the request again with new Range "
"header."
msgstr ""
"CUID#%d - Segment wurde verändert. Anforderung wird mit neuem Bereichs-"
"Header erneut gesendet."

#: src/message.h:44
#, c-format
msgid "CUID#%d - Redirecting to %s"
msgstr "CUID#%d - Weiterleitung zu %s"

#: src/message.h:45
#, c-format
msgid ""
"CUID#%d - Requesting:\n"
"%s"
msgstr ""
"CUID#%d - Anfordern:\n"
"%s"

#: src/message.h:46
#, c-format
msgid ""
"CUID#%d - Response received:\n"
"%s"
msgstr ""
"CUID#%d - Erhaltene Antwort:\n"
"%s"

#: src/message.h:47
#, c-format
msgid "CUID#%d - Download aborted. URI=%s"
msgstr "CUID#%d - Download abgebrochen. URI=%s"

#: src/message.h:48
#, c-format
msgid "CUID#%d - Restarting the download. URI=%s"
msgstr "CUID#%d - Download wird erneut gestartet. URI=%s"

#: src/message.h:49
#, c-format
msgid "CUID#%d - Download aborted."
msgstr "CUID#%d - Download abgebrochen."

#: src/message.h:50
#, c-format
msgid "CUID#%d - %d times attempted, but no success. Download aborted."
msgstr "CUID#%d - %d Versuche, aber kein Erfolg. Download abgebrochen."

#: src/message.h:56
#, c-format
msgid "CUID#%d - we got new piece. index=%d"
msgstr "CUID#%d - Neues Teilstück erhalten. Index=%d"

#: src/message.h:57
#, c-format
msgid "CUID#%d - we got wrong piece. index=%d"
msgstr "CUID#%d - falsches Teilstück erhalten. Index=%d"

#: src/message.h:58
#, c-format
msgid "CUID#%d - Download not complete: %s"
msgstr "CUID#%d - Download abgebrochen. %s"

#: src/message.h:59
#, c-format
msgid "#%d - Download has already completed: %s"
msgstr "#%d - Wurde bereits beendet: %s"

#: src/message.h:60
#, c-format
msgid "CUID#%d - Good checksum: %s"
msgstr "CUID#%d - Prüfsumme ok: %s"

#: src/message.h:61
#, c-format
msgid "CUID#%d - Bad checksum: %s"
msgstr "CUID#%d - Ungültige Prüfsumme: %s"

#: src/message.h:62
#, c-format
msgid "CUID#%d - Resolving hostname %s"
msgstr "CUID#%d - Löse Hostnamen auf %s"

#: src/message.h:63
#, c-format
msgid "CUID#%d - Name resolution complete: %s -> %s"
msgstr "CUID#%d - Namensauflösung abgeschlossen: %s -> %s"

#: src/message.h:64
#, c-format
msgid "CUID#%d - Name resolution for %s failed:%s"
msgstr "CUID#%d - Namensauflösung für %s fehlgeschlagen: %s"

#: src/message.h:65
#, c-format
msgid "CUID#%d - DNS cache hit: %s -> %s"
msgstr "CUID#%d - DNS-Eintrag im Cache: %s -> %s"

#: src/message.h:66
#, c-format
msgid "CUID#%d - Abort requested."
msgstr "CUID#%d - Abbruch angefordert."

#: src/message.h:67
#, c-format
msgid "CUID#%d - Connecting to the peer %s"
msgstr "CUID#%d - Verbinde zu Peer %s"

#: src/message.h:68
#, c-format
msgid ""
"CUID#%d - Piece received. index=%d, begin=%d, length=%d, offset=%llu, "
"blockIndex=%d"
msgstr ""
"CUID#%d - Stück empfangen. index=%d, begin=%d, length=%d, offset=%llu, "
"blockIndex=%d"

#: src/message.h:69
#, c-format
msgid "CUID#%d - Piece bitfield %s"
msgstr ""

#: src/message.h:70
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because the peer has been choked. "
"index=%d, begin=%d, length=%d"
msgstr ""
"CUID#%d - Reject piece message in queue because the peer has been choked. "
"index=%d, begin=%d, length=%d"

#: src/message.h:71
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because cancel message received. "
"index=%d, begin=%d, length=%d"
msgstr ""

#: src/message.h:72
#, c-format
msgid "CUID#%d - Exception caught while validating file integrity."
msgstr "CUID#%d - Ausnahmefehler beim Prüfen der Datei-Integrität."

#: src/message.h:73
#, c-format
msgid "CUID#%d - Interested in the peer"
msgstr ""

#: src/message.h:74
#, c-format
msgid "CUID#%d - Not interested in the peer"
msgstr "CUID#%d - Kein Interesse am Peer"

#: src/message.h:75
#, c-format
msgid "CUID#%d - Deleting request slot index=%d, blockIndex=%d"
msgstr ""

#: src/message.h:76
#, c-format
msgid ""
"CUID#%d - Deleting request slot index=%d, blockIndex=%d because localhost "
"got choked."
msgstr ""

#: src/message.h:77
#, c-format
msgid "CUID#%d - Deleting request slot blockIndex=%d because of time out"
msgstr ""

#: src/message.h:78
#, c-format
msgid ""
"CUID#%d - Deleting request slot blockIndex=%d because the block has been "
"acquired."
msgstr ""

#: src/message.h:79
#, c-format
msgid "CUID#%d - Fast extension enabled."
msgstr ""

#: src/message.h:80
#, c-format
msgid "CUID#%d - Extended Messaging enabled."
msgstr "CUID#%d - Erweitertes Messaging aktiviert"

#: src/message.h:81
#, c-format
msgid "CUID#%d - Exception caught while allocating file space."
msgstr "CUID#%d - Ausnahmefehler beim Reservieren des Speicherplatzes"

#: src/message.h:82
#, c-format
msgid "CUID#%d - Content-Disposition detected. Use %s as filename"
msgstr ""

#: src/message.h:83
#, c-format
msgid "CUID#%d - Peer %s:%d banned."
msgstr "CUID#%d - Peer %s:%d gebannt."

#: src/message.h:84
#, c-format
msgid "CUID#%d - Using port %d for accepting new connections"
msgstr "CUID#%d - Benutze Port %d, um neue Verbindungen zu akzeptieren"

#: src/message.h:85
#, c-format
msgid "CUID#%d - An error occurred while binding port=%d"
msgstr ""

#: src/message.h:86
#, c-format
msgid "CUID#%d - Incoming connection, adding new command CUID#%d"
msgstr "CUID#%d - Eingehende Verbindung, füge neuen Befehl CUID#%d hinzu"

#: src/message.h:87
#, c-format
msgid "CUID#%d - Error in accepting connection"
msgstr "CUID#%d - Fehler beim Akzeptieren der Verbindung"

#: src/message.h:88
#, c-format
msgid "CUID#%d - Error occurred while processing tracker response."
msgstr "CUID#%d - Fehler beim Verarbeiten der Antwort des Trackers"

#: src/message.h:89
#, c-format
msgid "CUID#%d - Cannot create tracker request."
msgstr "CUID#%d - Konnte keinen Tracker-Request erstellen."

#: src/message.h:90
#, c-format
msgid "CUID#%d - Creating new tracker request command #%d"
msgstr ""

#: src/message.h:91
#, c-format
msgid "CUID#%d - The peer is DHT-enabled."
msgstr "CUID#%d - Der Peer unterstützt DHT."

#: src/message.h:95
#, c-format
msgid "Unrecognized URI or unsupported protocol: %s"
msgstr "URL nicht erkannt oder nicht unterstütztes Protokoll: %s"

#: src/message.h:96
#, c-format
msgid "Tracker returned warning message: %s"
msgstr "Vom Tracker übergebene Warn-Nachricht: %s"

#: src/message.h:97
#, c-format
msgid "The segment file %s exists."
msgstr "Die Segmentdatei %s ist bereits vorhanden."

#: src/message.h:98
#, c-format
msgid "The segment file %s does not exist."
msgstr "Die Segmentdatei %s ist nicht vorhanden."

#: src/message.h:99
#, c-format
msgid "Saving the segment file %s"
msgstr "Speichern der Segmentdatei %s"

#: src/message.h:100
msgid "The segment file was saved successfully."
msgstr "Die Segmentdatei wurde fehlerfrei gespeichert."

#: src/message.h:101
#, c-format
msgid "Loading the segment file %s."
msgstr "Laden der Segmentdatei %s."

#: src/message.h:102
msgid "The segment file was loaded successfully."
msgstr "Die Segmentdatei wurde fehlerfrei geladen."

#: src/message.h:103
msgid "No URI to download. Download aborted."
msgstr "Keine URI zum Herunterladen angegeben. Download abgebrochen."

#: src/message.h:104
#, c-format
msgid ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."
msgstr ""
"Die Datei %s existiert bereits, nicht jedoch eine Kontrolldatei (*.aria2). "
"Der Download wurde abgebrochen, um die Datei vor dem Überschreiben zu "
"schützen. Wenn Sie die Datei komplett neu herunterladen möchten, löschen Sie "
"sie oder benutzen Sie die --allow-overwrite=true Option und starten Sie "
"aria2 erneut."

#: src/message.h:105
#, c-format
msgid "Allocating file %s, %s bytes"
msgstr "Reserviere Datei  %s, %s bytes"

#: src/message.h:106
msgid "File not found"
msgstr "Datei nicht gefunden"

#: src/message.h:107
msgid "Not a directory"
msgstr "Ist kein Verzeichnis"

#: src/message.h:108
#, c-format
msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d"
msgstr "Ungültige Prüfsumme. checksumLength=%d, numChecksum=%d"

#: src/message.h:109
#, c-format
msgid "Writing file %s"
msgstr "Schreibe Datei %s"

#: src/message.h:110
msgid "No peer list received."
msgstr "Keine Peer-Liste erhalten."

#: src/message.h:111
#, c-format
msgid "Adding peer %s:%d"
msgstr "Füge Peer %s:%d hinzu"

#: src/message.h:112
#, c-format
msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d"
msgstr "Lösche Teil index=%d, fillRate(%%)=%d<=%d"

#: src/message.h:113
msgid "Download of selected files was complete."
msgstr "Download der ausgewählten Dateien abgeschlossen"

#: src/message.h:114
msgid "The download was complete."
msgstr "Der Download wurde fertiggestellt."

#: src/message.h:115
#, c-format
msgid "Removed %d have entries."
msgstr "Entfernte %d Einträge."

#: src/message.h:116
#, c-format
msgid "Validating file %s"
msgstr "Prüfe Datei %s"

#: src/message.h:117
#, c-format
msgid "%d seconds to allocate %s byte(s)"
msgstr "%d Sekunden, um %s Byte(s) zu reservieren"

#: src/message.h:118
#, c-format
msgid "Dispatching FileAllocationCommand for CUID#%d."
msgstr "Dispatching FileAllocationCommand for CUID#%d."

#: src/message.h:119
#, c-format
msgid "Metalink: Queueing %s for download."
msgstr "Metalink: Füge %s zur Downloadwarteschlange hinzu."

#: src/message.h:120
#, c-format
msgid "Download complete: %s"
msgstr "Download fertig: %s"

#: src/message.h:121
msgid "Seeding is over."
msgstr "Verteilen beendet."

#: src/message.h:122
#, c-format
msgid "CUID#%d cancels segment index=%d. CUID#%d handles it instead."
msgstr ""

#: src/message.h:123
msgid "No chunk to verify."
msgstr "Kein Chunk zum überprüfen."

#: src/message.h:124
#, c-format
msgid "Good chunk checksum. hash=%s"
msgstr "Prüfsumme ok. hash=%s"

#: src/message.h:125
#, c-format
msgid "Failed to load cookies from %s"
msgstr "Konnte Cookies von %s nicht laden"

#: src/message.h:126
#, c-format
msgid ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."
msgstr ""
".netrc Datei %s hat ungültige Zugriffsrechte. Sollte 600 sein. netrc Support "
"abgeschaltet."

#: src/message.h:127
msgid "Logging started."
msgstr "Loggen gestartet."

#: src/message.h:128
msgid "Specify at least one URL."
msgstr "Geben Sie zumindest eine URL an."

#: src/message.h:129
msgid "daemon failed."
msgstr "Daemon-Start nicht erfolgreich"

#: src/message.h:130
#, c-format
msgid "Verification finished successfully. file=%s"
msgstr "Verifizierung erfolgreich abgeschlossen. file=%s"

#: src/message.h:131
#, c-format
msgid "Checksum error detected. file=%s"
msgstr "Prüfsummen-Fehler entdeckt. file=%s"

#: src/message.h:132
#, c-format
msgid "Incomplete range specified. %s"
msgstr "Unvollständiger Bereich angegeben. %s"

#: src/message.h:133
#, c-format
msgid "Failed to convert string into value: %s"
msgstr "Fehler beim Versuch Zeichenkette in Wert zu konvertieren: %s"

#: src/message.h:134
msgid "Resource not found"
msgstr "Ressource nicht gefunden"

#: src/message.h:135
#, c-format
msgid "File already exists. Renamed to %s."
msgstr "Datei existiert bereits. Umbenannt zu %s."

#: src/message.h:136
msgid "Cannot parse metalink XML file. XML may be malformed."
msgstr ""
"Konnte Metalink-XML-Datei nicht verarbeiten. Syntax könnte falsch sein."

#: src/message.h:137
#, c-format
msgid "Too small payload size for %s, size=%d."
msgstr ""

#: src/message.h:138
#, c-format
msgid ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."
msgstr ""
"Die veraltete Steuerdatei %s wurde entfernt, da die Download-Datei %s nicht "
"existiert."

#: src/message.h:139
#, c-format
msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"
msgstr "Das Verteilverhältnis betrug %.1f, hoch-/heruntergeladen=%sB/%sB"

#: src/message.h:140
#, c-format
msgid "Missing %s in torrent metainfo."
msgstr ""

#: src/message.h:141
msgid "Tracker returned null data."
msgstr "Der Tracker gab keine Daten zurück."

#: src/message.h:142
msgid "Windows socket library initialization failed"
msgstr "Initialisierung der Windows-Socket-Bibliothek schlug fehl."

#: src/message.h:143
#, c-format
msgid "%d second(s) has passed. Stopping application."
msgstr "%d Sekunden sind verstrichen. Anwendung wird gestoppt."

#: src/message.h:144
#, c-format
msgid ""
"Saved signature as %s. Please note that aria2 doesn't verify signatures."
msgstr ""
"Signatur unter %s gespeichert. Zu beachten: Aria2 überprüft Signaturen nicht."

#: src/message.h:146
#, c-format
msgid "Saving signature as %s failed. Maybe file already exists."
msgstr ""
"Speichern der Signatur unter %s fehlgeschlagen. Möglicherweise existiert\n"
"die Datei bereits."

#: src/message.h:149
#, c-format
msgid "Failed to open ServerStat file %s for read."
msgstr ""

#: src/message.h:150
#, c-format
msgid "ServerStat file %s loaded successfully."
msgstr ""

#: src/message.h:151
#, c-format
msgid "Failed to read ServerStat from %s."
msgstr ""

#: src/message.h:154
#, c-format
msgid "Failed to open ServerStat file %s for write."
msgstr ""

#: src/message.h:155
#, c-format
msgid "ServerStat file %s saved successfully."
msgstr ""

#: src/message.h:156
#, c-format
msgid "Failed to write ServerStat to %s."
msgstr ""

#: src/message.h:159
#, c-format
msgid "Failed to establish connection, cause: %s"
msgstr ""

#: src/message.h:160
#, c-format
msgid "Network problem has occurred. cause:%s"
msgstr ""

#: src/message.h:162
#, c-format
msgid "Failed to load trusted CA certificates from %s. Cause: %s"
msgstr ""

#: src/message.h:164
#, c-format
msgid "Certificate verification failed. Cause: %s"
msgstr ""

#: src/message.h:165
msgid "No certificate found."
msgstr "Kein Zertifikat gefunden."

#: src/message.h:166
msgid "Hostname not match."
msgstr ""

#: src/message.h:167
msgid "No files to download."
msgstr ""

#: src/message.h:169
msgid ""
"You may encounter the certificate verification error with HTTPS server. See "
"--ca-certificate and --check-certificate option."
msgstr ""

#: src/message.h:171
#, c-format
msgid "Printing the contents of file '%s'..."
msgstr ""

#: src/message.h:172
msgid "This file is neither Torrent nor Metalink file. Skipping."
msgstr ""

#: src/message.h:177
#, c-format
msgid "Is '%s' a file?"
msgstr "Ist '%s' eine Datei?"

#: src/message.h:178
#, c-format
msgid "Failed to find given interface %s, cause: %s"
msgstr ""

#: src/message.h:180
#, c-format
msgid "Saved metadata as %s."
msgstr ""

#: src/message.h:181
#, fuzzy, c-format
msgid "Saving metadata as %s failed. Maybe file already exists."
msgstr ""
"Speichern der Signatur unter %s fehlgeschlagen. Möglicherweise existiert\n"
"die Datei bereits."

#: src/message.h:184
msgid "Timeout."
msgstr "Zeitüberschreitung."

#: src/message.h:185
msgid "Invalid chunk size."
msgstr "Ungültige Teilgröße."

#: src/message.h:186
#, c-format
msgid "Too large chunk. size=%d"
msgstr "Teilstück zu groß. Größe=%d"

#: src/message.h:187
msgid "Invalid header."
msgstr "Ungültige Header-Information."

#: src/message.h:188
msgid "Invalid response."
msgstr "Ungültige Antwort."

#: src/message.h:189
msgid "No header found."
msgstr "Keine Header-Information gefunden."

#: src/message.h:190
msgid "No status header."
msgstr "Keine Status-Information."

#: src/message.h:191
msgid "Proxy connection failed."
msgstr "Proxy-Verbindung fehlgeschlagen."

#: src/message.h:192
msgid "Connection failed."
msgstr "Verbindung fehlgeschlagen."

#: src/message.h:193
#, c-format
msgid ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"
msgstr ""

#: src/message.h:194
#, c-format
msgid "The response status is not successful. status=%d"
msgstr "Antwortstatus ist nicht in Ordnung. Status=%d"

#: src/message.h:195
#, c-format
msgid "Too large file size. size=%s"
msgstr "Dateigröße zu groß. Größe=%s"

#: src/message.h:196
#, c-format
msgid "Transfer encoding %s is not supported."
msgstr "Übertragungskodierung %s wird nicht unterstützt."

#: src/message.h:197
#, c-format
msgid "SSL initialization failed: %s"
msgstr "SSL-Initialisierung fehlgeschlagen: %s"

#: src/message.h:198
msgid "SSL I/O error"
msgstr "SSL I/O störung"

#: src/message.h:199
msgid "SSL protocol error"
msgstr "SSL protocol störung"

#: src/message.h:200
#, c-format
msgid "SSL unknown error %d"
msgstr "Unbekannter SSL Fehler %d"

#: src/message.h:201
#, c-format
msgid "SSL initialization failed: OpenSSL connect error %d"
msgstr "SSL-Initialisierung schlug fehl: OpenSSL-Verbindungsfehler %d"

#: src/message.h:202
#, c-format
msgid "Size mismatch Expected:%s Actual:%s"
msgstr "Größenunterschied. Erwartet:%s Tatsächlich:%s"

#: src/message.h:203
msgid "Authorization failed."
msgstr "Die Anmeldung ist fehlgeschlagen."

#: src/message.h:204
msgid "Got EOF from the server."
msgstr "Erhielt EOF vom Server."

#: src/message.h:205
msgid "Got EOF from peer."
msgstr "Erhielt EOF von Gegenstelle."

#: src/message.h:206
msgid "Malformed meta info."
msgstr "Fehlerhafte Meta-Information."

#: src/message.h:208
#, c-format
msgid "Failed to open the file %s, cause: %s"
msgstr "Konnte Datei %s nicht öffnen, Ursache: %s"

#: src/message.h:209
#, c-format
msgid "Failed to write into the file %s, cause: %s"
msgstr "Konnte nicht in Datei %s schreiben, Ursache: %s"

#: src/message.h:210
#, c-format
msgid "Failed to read from the file %s, cause: %s"
msgstr "Konnte nicht von Datei %s lesen, Ursache: %s"

#: src/message.h:211
msgid "Failed to read data from disk."
msgstr "Der Versuch Daten von der Festplatte zu lesen ist fehlgeschlagen."

#: src/message.h:212
#, c-format
msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"
msgstr ""
"Konnte SHA1-Digest (eines Teils) der Datei %s nicht berechnen, Ursache: %s"

#: src/message.h:213
#, c-format
msgid "Failed to seek the file %s, cause: %s"
msgstr "Konnte nicht in Datei %s positionieren, Ursache: %s"

#: src/message.h:214
#, c-format
msgid "The offset is out of range, offset=%s"
msgstr ""

#: src/message.h:215
#, c-format
msgid "%s is not a directory."
msgstr "%s ist kein Verzeichnis."

#: src/message.h:216
#, c-format
msgid "Failed to make the directory %s, cause: %s"
msgstr "Konnte Verzeichnis %s nicht erstellen, Ursache: %s"

#: src/message.h:217
#, c-format
msgid "Failed to open the segment file %s, cause: %s"
msgstr "Konnte Segmentdatei %s nicht öffnen, Ursache %s"

#: src/message.h:218
#, c-format
msgid "Failed to write into the segment file %s, cause: %s"
msgstr "Konnte nicht in Segmentdatei %s schreiben, Ursache: %s"

#: src/message.h:219
#, c-format
msgid "Failed to read from the segment file %s, cause: %s"
msgstr "Konnte nicht aus Segmentdatei %s lesen, Ursache: %s"

#: src/message.h:221
#, c-format
msgid "Failed to open a socket, cause: %s"
msgstr "Konnte Socket nicht öffnen, Ursache: %s"

#: src/message.h:222
#, c-format
msgid "Failed to set a socket option, cause: %s"
msgstr "Konnte eine Socket-Option nicht setzen, Ursache: %s"

#: src/message.h:223
#, c-format
msgid "Failed to set a socket as blocking, cause: %s"
msgstr ""

#: src/message.h:224
#, c-format
msgid "Failed to set a socket as non-blocking, cause: %s"
msgstr ""

#: src/message.h:225
#, c-format
msgid "Failed to bind a socket, cause: %s"
msgstr "Konnte Socket nicht binden, Ursache: %s"

#: src/message.h:226
#, c-format
msgid "Failed to listen to a socket, cause: %s"
msgstr "Konnte nicht auf Socket lauschen, Ursache: %s"

#: src/message.h:227
#, c-format
msgid "Failed to accept a peer connection, cause: %s"
msgstr "Konnte Peer-Verbindung nicht akzeptieren, Ursache: %s"

#: src/message.h:228
#, c-format
msgid "Failed to get the name of socket, cause: %s"
msgstr "Konnte Socketnamen nicht ermitteln, Ursache: %s"

#: src/message.h:229
#, c-format
msgid "Failed to get the name of connected peer, cause: %s"
msgstr "Konnte Namen der verbundenen Gegenstelle nicht ermitteln, Ursache: %s"

#: src/message.h:230
#, c-format
msgid "Failed to resolve the hostname %s, cause: %s"
msgstr "Konnte Rechnername %s nicht auflösen, Ursache: %s"

#: src/message.h:231
#, c-format
msgid "Failed to connect to the host %s, cause: %s"
msgstr "Konnte nicht zum Rechner %s verbinden, Ursache: %s"

#: src/message.h:232
#, c-format
msgid "Failed to check whether the socket is writable, cause: %s"
msgstr "Konnte nicht testen, ob der Socket beschreibbar ist, Ursache: %s"

#: src/message.h:233
#, c-format
msgid "Failed to check whether the socket is readable, cause: %s"
msgstr "Konnte nicht testen, ob der Socket lesbar ist, Ursache: %s"

#: src/message.h:234
#, c-format
msgid "Failed to send data, cause: %s"
msgstr "Konnte Daten nicht senden, Ursache: %s"

#: src/message.h:235
#, c-format
msgid "Failed to receive data, cause: %s"
msgstr "Konnte Daten nicht erhalten, Ursache: %s"

#: src/message.h:236
#, c-format
msgid "Failed to peek data, cause: %s"
msgstr "Datenermittelung fehlgeschlagen, Ursache: %s"

#: src/message.h:237
#, c-format
msgid "Unknown socket error %d (0x%x)"
msgstr "Unbekannter Socket Fehler %d (0x%x)"

#: src/message.h:238
#, c-format
msgid "File %s exists, but %s does not exist."
msgstr "Die Datei %s existiert, %s jedoch nicht."

#: src/message.h:239
#, c-format
msgid "Invalid payload size for %s, size=%d. It should be %d."
msgstr "Ungültige Payload Grösse %s, size=%d. Sollte %d sein."

#: src/message.h:240
#, c-format
msgid "Invalid ID=%d for %s. It should be %d."
msgstr "Ungültige ID=%d für %s. Sollte %d sein."

#: src/message.h:241
#, c-format
msgid ""
"Chunk checksum validation failed. checksumIndex=%d, offset=%s, expectedHash=%"
"s, actualHash=%s"
msgstr ""
"Chunk Prüfusummenvalidierung nicht bestanden. checksumIndex=%d, offset=%s, "
"expectedHash=%s, actualHash=%s"

#: src/message.h:242
msgid "Download aborted."
msgstr "Download abgebrochen."

#: src/message.h:243
#, c-format
msgid "File %s is being downloaded by other command."
msgstr "Datei %s wird von einem anderen Befehl heruntergeladen."

#: src/message.h:244
msgid "Insufficient checksums."
msgstr "Ungenügende Prüfsummen."

#: src/message.h:245
#, c-format
msgid "Tracker returned failure reason: %s"
msgstr "Der Tracker gab als Grund des Fehlschlags an: %s"

#: src/message.h:246
msgid "Flooding detected."
msgstr "Flooding entdeckt."

#: src/message.h:247
#, c-format
msgid ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%d seconds)."
msgstr ""
"Verbindung abgebrochen da während einer gewissen Zeit (%d Sekunden) keine "
"Anfragen/Teile übetragen wurden."

#: src/message.h:248
msgid "The infoHash in torrent file doesn't match to one in .aria2 file."
msgstr ""
"Der infoHash in der torrent Datei stimmt nicht mit dem in der .aria2 Datei "
"überein."

#: src/message.h:249
#, c-format
msgid "No such file entry %s"
msgstr "Kein passender Dateieintrag %s"

#: src/message.h:250
#, c-format
msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s"
msgstr "Zu langsame Download Geschwindigkeit: %d <= %d(B/s), host:%s"

#: src/message.h:251
msgid "No HttpRequestEntry found."
msgstr "Es wurde kein HttpRequestEntry gefunden."

#: src/message.h:252
#, c-format
msgid "Got %d status, but no location header provided."
msgstr "Erhielt %d Status, aber kein Location Header angegeben.."

#: src/message.h:253
#, c-format
msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"
msgstr "Ungültiger Bereichs Header. Request: %s-%s/%s, Response: %s-%s/%s"

#: src/message.h:254
msgid "No file matched with your preference."
msgstr "Keine Datei passt auf ihre Einstellungen."

#: src/message.h:255
msgid "Exception caught"
msgstr "Ausnahme aufgetreten"

#: src/message.h:256
#, c-format
msgid "Max payload length exceeded or invalid. length = %u"
msgstr ""

#: src/message.h:257
#, c-format
msgid "Invalid file length. Cannot continue download %s: local %s, remote %s"
msgstr "Ungültige Dateigrösse. Download abgebrochen %s: local %s, remote %s"

#: src/BtSetup.cc:161
msgid "Errors occurred while binding port.\n"
msgstr "Fehler beim Binden an Port aufgetreten.\n"

#~ msgid "CUID#%d - Unregistering cuid from segmentManager."
#~ msgstr "CUID#%d - cuid beim segmentManager deregistriert."

#~ msgid " -D, --daemon                 Run as daemon."
#~ msgstr " -D, --daemon                 Start als Daemon-Prozeß."