aria2/po/zh_CN.po

# Simplified Chinese translation for aria2
# Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007
# This file is distributed under the same license as the aria2 package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: aria2\n"
"Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n"
"POT-Creation-Date: 2008-03-15 20:03+0900\n"
"PO-Revision-Date: 2008-03-12 12:39+0000\n"
"Last-Translator: hlidea <hlidea@163.com>\n"
"Language-Team: Simplified Chinese <zh_CN@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2008-03-15 07:56+0000\n"
"X-Generator: Launchpad (build Unknown)\n"

#: src/OptionHandlerImpl.h:70
msgid "must be either 'true' or 'false'."
msgstr "必须为'true'或'false'."

#: src/OptionHandlerImpl.h:91 src/OptionHandlerImpl.h:124
#, c-format
msgid "must be between %s and %s."
msgstr "必须在%s和%s之间."

#: src/OptionHandlerImpl.h:121
#, c-format
msgid "must be smaller than or equal to %s."
msgstr "必须小于或等于%s."

#: src/OptionHandlerImpl.h:127
#, c-format
msgid "must be greater than or equal to %s."
msgstr "必须大于或等于%s."

#: src/OptionHandlerImpl.h:130 src/OptionHandlerImpl.h:176
msgid "must be a number."
msgstr "必须是一个数字"

#: src/OptionHandlerImpl.h:167
#, c-format
msgid "must be smaller than or equal to %.1f."
msgstr "必须小于或等于%.1f."

#: src/OptionHandlerImpl.h:170
#, c-format
msgid "must be between %.1f and %.1f."
msgstr "必须在%.1f 和%.1f之间."

#: src/OptionHandlerImpl.h:173
#, c-format
msgid "must be greater than or equal to %.1f."
msgstr "必须大于或等于%.1f."

#: src/OptionHandlerImpl.h:235
msgid "must be one of the following:"
msgstr "必须为以下值之一:"

#: src/OptionHandlerImpl.h:272
msgid "unrecognized proxy format"
msgstr "无法识别的代理格式"

#: src/message.h:40
#, c-format
msgid "CUID#%d - The download for one segment completed successfully."
msgstr "CUID#%d - 一个分块的下载成功的完成了."

#: src/message.h:41
#, c-format
msgid "CUID#%d - No segment available."
msgstr "CUID#%d - 已经没有多余的分块"

#: src/message.h:42
#, c-format
msgid "CUID#%d - Connecting to %s:%d"
msgstr "CUID#%d - 连接到 %s:%d"

#: src/message.h:43
#, c-format
msgid ""
"CUID#%d - The segment changed. We send the request again with new Range "
"header."
msgstr "CUID#%d - 分块发生变化。将使用新的范围报头再次发送请求。"

#: src/message.h:44
#, c-format
msgid "CUID#%d - Redirecting to %s"
msgstr "CUID#%d - 重定向到%s"

#: src/message.h:45
#, c-format
msgid ""
"CUID#%d - Requesting:\n"
"%s"
msgstr ""
"CUID#%d - 正在请求:\n"
"%s"

#: src/message.h:46
#, c-format
msgid ""
"CUID#%d - Response received:\n"
"%s"
msgstr ""
"CUID#%d - 收到应答:\n"
"%s"

#: src/message.h:47
#, c-format
msgid "CUID#%d - Download aborted. URI=%s"
msgstr "CUID#%d - 下载中断。URI=%s"

#: src/message.h:48
#, c-format
msgid "CUID#%d - Restarting the download. URI=%s"
msgstr "CUID#%d - 重新开始下载。URI=%s"

#: src/message.h:49
#, c-format
msgid "CUID#%d - Download aborted."
msgstr "CUID#%d - 下载中断。"

#: src/message.h:50
#, c-format
msgid "CUID#%d - %d times attempted, but no success. Download aborted."
msgstr "CUID#%d - %d 次尝试均告失败.下载终止."

#: src/message.h:51
#, c-format
msgid "CUID#%d - Unregistering cuid from segmentManager."
msgstr "CUID#%d - 正在从块管理器(segmentManager)中注销cuid."

#: src/message.h:57
#, c-format
msgid "CUID#%d - we got new piece. index=%d"
msgstr "CUID#%d - 获得新的分片. index=%d"

#: src/message.h:58
#, c-format
msgid "CUID#%d - we got wrong piece. index=%d"
msgstr "CUID#%d - 获得错误的分片. index=%d"

#: src/message.h:59
#, c-format
msgid "CUID#%d - Download not complete: %s"
msgstr "CUID#%d - 下载未完成: %s"

#: src/message.h:60
#, c-format
msgid "#%d - Download has already completed: %s"
msgstr "#%d - 下载已完成: %s"

#: src/message.h:61
#, c-format
msgid "CUID#%d - Good checksum: %s"
msgstr "CUID#%d - 正确的校验和: %s"

#: src/message.h:62
#, c-format
msgid "CUID#%d - Bad checksum: %s"
msgstr "CUID#%d - 错误的校验和: %s"

#: src/message.h:63
#, c-format
msgid "CUID#%d - Resolving hostname %s"
msgstr "CUID#%d - 正在解析主机名 %s"

#: src/message.h:64
#, c-format
msgid "CUID#%d - Name resolution complete: %s -> %s"
msgstr "CUID#%d - 名字解析完成: %s -> %s"

#: src/message.h:65
#, c-format
msgid "CUID#%d - Name resolution for %s failed:%s"
msgstr "CUID#%d - %s的名字解析失败,原因:%s"

#: src/message.h:66
#, c-format
msgid "CUID#%d - DNS cache hit: %s -> %s"
msgstr "CUID#%d - DNS cache 命中: %s -> %s"

#: src/message.h:67
#, c-format
msgid "CUID#%d - Abort requested."
msgstr "CUID#%d - Abort requested."

#: src/message.h:68
#, c-format
msgid "CUID#%d - Connecting to the peer %s"
msgstr ""

#: src/message.h:69
#, c-format
msgid ""
"CUID#%d - Piece received. index=%d, begin=%d, length=%d, offset=%llu, "
"blockIndex=%d"
msgstr ""

#: src/message.h:70
#, c-format
msgid "CUID#%d - Piece bitfield %s"
msgstr ""

#: src/message.h:71
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because the peer has been choked. "
"index=%d, begin=%d, length=%d"
msgstr ""

#: src/message.h:72
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because cancel message received. "
"index=%d, begin=%d, length=%d"
msgstr ""

#: src/message.h:73
#, c-format
msgid "CUID#%d - Exception caught while validating file integrity."
msgstr ""

#: src/message.h:74
#, c-format
msgid "CUID#%d - Interested in the peer"
msgstr ""

#: src/message.h:75
#, c-format
msgid "CUID#%d - Not interested in the peer"
msgstr ""

#: src/message.h:76
#, c-format
msgid "CUID#%d - Deleting request slot index=%d, blockIndex=%d"
msgstr ""

#: src/message.h:77
#, c-format
msgid ""
"CUID#%d - Deleting request slot index=%d, blockIndex=%d because localhost "
"got choked."
msgstr ""

#: src/message.h:78
#, c-format
msgid "CUID#%d - Deleting request slot blockIndex=%d because of time out"
msgstr ""

#: src/message.h:79
#, c-format
msgid ""
"CUID#%d - Deleting request slot blockIndex=%d because the block has been "
"acquired."
msgstr ""

#: src/message.h:80
#, c-format
msgid "CUID#%d - Fast extension enabled."
msgstr ""

#: src/message.h:81
#, c-format
msgid "CUID#%d - Extended Messaging enabled."
msgstr ""

#: src/message.h:82
#, c-format
msgid "CUID#%d - Exception caught while allocating file space."
msgstr ""

#: src/message.h:83
#, c-format
msgid "CUID#%d - Content-Disposition detected. Use %s as filename"
msgstr ""

#: src/message.h:84
#, c-format
msgid "CUID#%d - Peer %s:%d banned."
msgstr ""

#: src/message.h:85
#, c-format
msgid "CUID#%d - Using port %d for accepting new connections"
msgstr ""

#: src/message.h:86
#, c-format
msgid "CUID#%d - An error occurred while binding port=%d"
msgstr ""

#: src/message.h:87
#, c-format
msgid "CUID#%d - Incoming connection, adding new command CUID#%d"
msgstr ""

#: src/message.h:88
#, c-format
msgid "CUID#%d - Error in accepting connection"
msgstr ""

#: src/message.h:89
#, c-format
msgid "CUID#%d - Error occurred while processing tracker response."
msgstr ""

#: src/message.h:90
#, c-format
msgid "CUID#%d - Cannot create tracker request."
msgstr ""

#: src/message.h:91
#, c-format
msgid "CUID#%d - Creating new tracker request command #%d"
msgstr ""

#: src/message.h:92
#, c-format
msgid "CUID#%d - The peer is DHT-enabled."
msgstr ""

#: src/message.h:94
#, c-format
msgid "Unrecognized URI or unsupported protocol: %s"
msgstr ""

#: src/message.h:95
#, c-format
msgid "Tracker returned warning message: %s"
msgstr ""

#: src/message.h:96
#, c-format
msgid "The segment file %s exists."
msgstr ""

#: src/message.h:97
#, c-format
msgid "The segment file %s does not exist."
msgstr ""

#: src/message.h:98
#, c-format
msgid "Saving the segment file %s"
msgstr ""

#: src/message.h:99
msgid "The segment file was saved successfully."
msgstr ""

#: src/message.h:100
#, c-format
msgid "Loading the segment file %s."
msgstr ""

#: src/message.h:101
msgid "The segment file was loaded successfully."
msgstr ""

#: src/message.h:102
msgid "No URI to download. Download aborted."
msgstr ""

#: src/message.h:103
#, c-format
msgid ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."
msgstr ""

#: src/message.h:104
#, c-format
msgid "Allocating file %s, %s bytes"
msgstr ""

#: src/message.h:105
msgid "File not found"
msgstr ""

#: src/message.h:106
msgid "Not a directory"
msgstr ""

#: src/message.h:107
#, c-format
msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d"
msgstr ""

#: src/message.h:108
#, c-format
msgid "Writing file %s"
msgstr ""

#: src/message.h:109
msgid "No peer list received."
msgstr ""

#: src/message.h:110
#, c-format
msgid "Adding peer %s:%d"
msgstr ""

#: src/message.h:111
#, c-format
msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d"
msgstr ""

#: src/message.h:112
msgid "Download of selected files was complete."
msgstr ""

#: src/message.h:113
msgid "The download was complete."
msgstr ""

#: src/message.h:114
#, c-format
msgid "Removed %d have entries."
msgstr ""

#: src/message.h:115
#, c-format
msgid "Validating file %s"
msgstr ""

#: src/message.h:116
#, c-format
msgid "%d seconds to allocate %s byte(s)"
msgstr ""

#: src/message.h:117
#, c-format
msgid "Dispatching FileAllocationCommand for CUID#%d."
msgstr ""

#: src/message.h:118
#, c-format
msgid "Metalink: Queueing %s for download."
msgstr ""

#: src/message.h:119
#, c-format
msgid "Download complete: %s"
msgstr ""

#: src/message.h:120
msgid "Seeding is over."
msgstr ""

#: src/message.h:121
#, c-format
msgid "CUID#%d cancels segment index=%d. CUID#%d handles it instead."
msgstr ""

#: src/message.h:122
msgid "No chunk to verify."
msgstr ""

#: src/message.h:123
#, c-format
msgid "Good chunk checksum. hash=%s"
msgstr ""

#: src/message.h:124
#, c-format
msgid "Failed to load cookies from %s"
msgstr ""

#: src/message.h:125
#, c-format
msgid ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."
msgstr ""

#: src/message.h:126
msgid "Logging started."
msgstr ""

#: src/message.h:127
msgid "Specify at least one URL."
msgstr ""

#: src/message.h:128
msgid "daemon failed."
msgstr ""

#: src/message.h:129
#, c-format
msgid "Verification finished successfully. file=%s"
msgstr ""

#: src/message.h:130
#, c-format
msgid "Checksum error detected. file=%s"
msgstr ""

#: src/message.h:131
#, c-format
msgid "Incomplete range specified. %s"
msgstr ""

#: src/message.h:132
#, c-format
msgid "Failed to convert string into value: %s"
msgstr ""

#: src/message.h:133
msgid "Resource not found"
msgstr ""

#: src/message.h:134
#, c-format
msgid "File already exists. Renamed to %s."
msgstr ""

#: src/message.h:135
msgid "Cannot parse metalink XML file. XML may be malformed."
msgstr ""

#: src/message.h:136
#, c-format
msgid "Too small payload size for %s, size=%d."
msgstr ""

#: src/message.h:137
#, c-format
msgid ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."
msgstr ""

#: src/message.h:138
#, c-format
msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"
msgstr ""

#: src/message.h:139
#, c-format
msgid "Missing %s in torrent metainfo."
msgstr ""

#: src/message.h:140
msgid "Tracker returned null data."
msgstr ""

#: src/message.h:141
msgid "Windows socket library initialization failed"
msgstr ""

#: src/message.h:142
#, c-format
msgid "%d second(s) has passed. Stopping application."
msgstr ""

#: src/message.h:144
msgid "Timeout."
msgstr ""

#: src/message.h:145
msgid "Invalid chunk size."
msgstr ""

#: src/message.h:146
#, c-format
msgid "Too large chunk. size=%d"
msgstr ""

#: src/message.h:147
msgid "Invalid header."
msgstr ""

#: src/message.h:148
msgid "Invalid response."
msgstr ""

#: src/message.h:149
msgid "No header found."
msgstr ""

#: src/message.h:150
msgid "No status header."
msgstr ""

#: src/message.h:151
msgid "Proxy connection failed."
msgstr ""

#: src/message.h:152
msgid "Connection failed."
msgstr ""

#: src/message.h:153
#, c-format
msgid ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"
msgstr ""

#: src/message.h:154
#, c-format
msgid "The response status is not successful. status=%d"
msgstr ""

#: src/message.h:155
#, c-format
msgid "Too large file size. size=%s"
msgstr ""

#: src/message.h:156
#, c-format
msgid "Transfer encoding %s is not supported."
msgstr ""

#: src/message.h:157
#, c-format
msgid "SSL initialization failed: %s"
msgstr ""

#: src/message.h:158
msgid "SSL I/O error"
msgstr ""

#: src/message.h:159
msgid "SSL protocol error"
msgstr ""

#: src/message.h:160
#, c-format
msgid "SSL unknown error %d"
msgstr ""

#: src/message.h:161
#, c-format
msgid "SSL initialization failed: OpenSSL connect error %d"
msgstr ""

#: src/message.h:162
#, c-format
msgid "Size mismatch Expected:%s Actual:%s"
msgstr ""

#: src/message.h:163
msgid "Authorization failed."
msgstr ""

#: src/message.h:164
msgid "Got EOF from the server."
msgstr ""

#: src/message.h:165
msgid "Got EOF from peer."
msgstr ""

#: src/message.h:166
msgid "Malformed meta info."
msgstr ""

#: src/message.h:168
#, c-format
msgid "Failed to open the file %s, cause: %s"
msgstr ""

#: src/message.h:169
#, c-format
msgid "Failed to write into the file %s, cause: %s"
msgstr ""

#: src/message.h:170
#, c-format
msgid "Failed to read from the file %s, cause: %s"
msgstr ""

#: src/message.h:171
msgid "Failed to read data from disk."
msgstr ""

#: src/message.h:172
#, c-format
msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"
msgstr ""

#: src/message.h:173
#, c-format
msgid "Failed to seek the file %s, cause: %s"
msgstr ""

#: src/message.h:174
#, c-format
msgid "The offset is out of range, offset=%s"
msgstr ""

#: src/message.h:175
#, c-format
msgid "%s is not a directory."
msgstr ""

#: src/message.h:176
#, c-format
msgid "Failed to make the directory %s, cause: %s"
msgstr ""

#: src/message.h:177
#, c-format
msgid "Failed to open the segment file %s, cause: %s"
msgstr ""

#: src/message.h:178
#, c-format
msgid "Failed to write into the segment file %s, cause: %s"
msgstr ""

#: src/message.h:179
#, c-format
msgid "Failed to read from the segment file %s, cause: %s"
msgstr ""

#: src/message.h:181
#, c-format
msgid "Failed to open a socket, cause: %s"
msgstr ""

#: src/message.h:182
#, c-format
msgid "Failed to set a socket option, cause: %s"
msgstr ""

#: src/message.h:183
#, c-format
msgid "Failed to set a socket as blocking, cause: %s"
msgstr ""

#: src/message.h:184
#, c-format
msgid "Failed to set a socket as non-blocking, cause: %s"
msgstr ""

#: src/message.h:185
#, c-format
msgid "Failed to bind a socket, cause: %s"
msgstr ""

#: src/message.h:186
#, c-format
msgid "Failed to listen to a socket, cause: %s"
msgstr ""

#: src/message.h:187
#, c-format
msgid "Failed to accept a peer connection, cause: %s"
msgstr ""

#: src/message.h:188
#, c-format
msgid "Failed to get the name of socket, cause: %s"
msgstr ""

#: src/message.h:189
#, c-format
msgid "Failed to get the name of connected peer, cause: %s"
msgstr ""

#: src/message.h:190
#, c-format
msgid "Failed to resolve the hostname %s, cause: %s"
msgstr ""

#: src/message.h:191
#, c-format
msgid "Failed to connect to the host %s, cause: %s"
msgstr ""

#: src/message.h:192
#, c-format
msgid "Failed to check whether the socket is writable, cause: %s"
msgstr ""

#: src/message.h:193
#, c-format
msgid "Failed to check whether the socket is readable, cause: %s"
msgstr ""

#: src/message.h:194
#, c-format
msgid "Failed to send data, cause: %s"
msgstr ""

#: src/message.h:195
#, c-format
msgid "Failed to receive data, cause: %s"
msgstr ""

#: src/message.h:196
#, c-format
msgid "Failed to peek data, cause: %s"
msgstr ""

#: src/message.h:197
#, c-format
msgid "Unknown socket error %d (0x%x)"
msgstr ""

#: src/message.h:198
#, c-format
msgid "File %s exists, but %s does not exist."
msgstr ""

#: src/message.h:199
#, c-format
msgid "Invalid payload size for %s, size=%d. It should be %d."
msgstr ""

#: src/message.h:200
#, c-format
msgid "Invalid ID=%d for %s. It should be %d."
msgstr ""

#: src/message.h:201
#, c-format
msgid ""
"Chunk checksum validation failed. checksumIndex=%d, offset=%s, expectedHash=%"
"s, actualHash=%s"
msgstr ""

#: src/message.h:202
msgid "Download aborted."
msgstr ""

#: src/message.h:203
#, c-format
msgid "File %s is being downloaded by other command."
msgstr ""

#: src/message.h:204
msgid "Insufficient checksums."
msgstr ""

#: src/message.h:205
#, c-format
msgid "Tracker returned failure reason: %s"
msgstr ""

#: src/message.h:206
msgid "Flooding detected."
msgstr ""

#: src/message.h:207
#, c-format
msgid ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%d seconds)."
msgstr ""

#: src/message.h:208
msgid "The infoHash in torrent file doesn't match to one in .aria2 file."
msgstr ""

#: src/message.h:209
#, c-format
msgid "No such file entry %s"
msgstr ""

#: src/message.h:210
#, c-format
msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s"
msgstr ""

#: src/message.h:211
msgid "No HttpRequestEntry found."
msgstr ""

#: src/message.h:212
#, c-format
msgid "Got %d status, but no location header provided."
msgstr ""

#: src/message.h:213
#, c-format
msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"
msgstr ""

#: src/message.h:214
msgid "No file matched with your preference."
msgstr ""

#: src/message.h:215
msgid "Exception caught"
msgstr ""

#: src/message.h:216
#, c-format
msgid "Max payload length exceeded or invalid. length = %u"
msgstr ""

#: src/message.h:217
#, c-format
msgid "Invalid file length. Cannot continue download %s: local %s, remote %s"
msgstr ""

#: src/usage_text.h:37
msgid ""
" -d, --dir=DIR                The directory to store the downloaded file."
msgstr ""

#: src/usage_text.h:39
msgid " -o, --out=FILE               The file name of the downloaded file."
msgstr ""

#: src/usage_text.h:41
msgid ""
" -l, --log=LOG                The file name of the log file. If '-' is\n"
"                              specified, log is written to stdout."
msgstr ""

#: src/usage_text.h:44
msgid " -D, --daemon                 Run as daemon."
msgstr ""

#: src/usage_text.h:46
msgid ""
" -s, --split=N                Download a file using N connections. N must "
"be\n"
"                              between 1 and 5. This option affects all "
"URLs.\n"
"                              Thus, aria2 connects to each URL with\n"
"                              N connections.\n"
"                              Default: 1"
msgstr ""

#: src/usage_text.h:52
msgid ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured. Specify a value between 0 and "
"60.\n"
"                              Default: 5"
msgstr ""

#: src/usage_text.h:56
msgid " -t, --timeout=SEC            Set timeout in seconds. Default: 60"
msgstr ""

#: src/usage_text.h:58
msgid ""
" -m, --max-tries=N            Set number of tries. 0 means unlimited.\n"
"                              Default: 5"
msgstr ""

#: src/usage_text.h:61
msgid ""
" --http-proxy=HOST:PORT       Use HTTP proxy server. This affects all URLs."
msgstr ""

#: src/usage_text.h:63
msgid " --http-user=USER             Set HTTP user. This affects all URLs."
msgstr ""

#: src/usage_text.h:65
msgid " --http-passwd=PASSWD         Set HTTP password. This affects all URLs."
msgstr ""

#: src/usage_text.h:67
msgid ""
" --http-proxy-user=USER       Set HTTP proxy user. This affects all URLs."
msgstr ""

#: src/usage_text.h:69
msgid ""
" --http-proxy-passwd=PASSWD   Set HTTP proxy password. This affects all URLs."
msgstr ""

#: src/usage_text.h:71
msgid ""
" --http-proxy-method=METHOD   Set the method to use in proxy request.\n"
"                              METHOD is either 'get' or 'tunnel'.\n"
"                              Default: tunnel"
msgstr ""

#: src/usage_text.h:75
msgid ""
" --http-auth-scheme=SCHEME    Set HTTP authentication scheme. Currently, "
"basic\n"
"                              is the only supported scheme.\n"
"                              Default: basic"
msgstr ""

#: src/usage_text.h:79
msgid " --referer=REFERER            Set Referer. This affects all URLs."
msgstr ""

#: src/usage_text.h:81
msgid ""
" --ftp-user=USER              Set FTP user. This affects all URLs.\n"
"                              Default: anonymous"
msgstr ""

#: src/usage_text.h:84
msgid ""
" --ftp-passwd=PASSWD          Set FTP password. This affects all URLs.\n"
"                              Default: ARIA2USER@"
msgstr ""

#: src/usage_text.h:87
msgid ""
" --ftp-type=TYPE              Set FTP transfer type. TYPE is either "
"'binary'\n"
"                              or 'ascii'.\n"
"                              Default: binary"
msgstr ""

#: src/usage_text.h:91
msgid " -p, --ftp-pasv               Use passive mode in FTP."
msgstr ""

#: src/usage_text.h:93
msgid ""
" --ftp-via-http-proxy=METHOD  Use HTTP proxy in FTP. METHOD is either 'get' "
"or\n"
"                              'tunnel'.\n"
"                              Default: tunnel"
msgstr ""

#: src/usage_text.h:97
msgid ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads.\n"
"                              Default: 0"
msgstr ""

#: src/usage_text.h:104
msgid ""
" --max-download-limit=SPEED   Set max download speed in bytes per sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              Default: 0"
msgstr ""

#: src/usage_text.h:109
msgid ""
" --file-allocation=METHOD     Specify file allocation method. METHOD is "
"either\n"
"                              'none' or 'prealloc'. 'none' doesn't pre-"
"allocate\n"
"                              file space. 'prealloc' pre-allocates file "
"space\n"
"                              before download begins. This may take some "
"time\n"
"                              depending on the size of the file.\n"
"                              Default: prealloc"
msgstr ""

#: src/usage_text.h:116
msgid ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""

#: src/usage_text.h:120
msgid ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"
msgstr ""

#: src/usage_text.h:124
msgid ""
" --allow-overwrite=true|false If false, aria2 doesn't download a file which\n"
"                              already exists but the corresponding .aria2 "
"file\n"
"                              doesn't exist.\n"
"                              Default: false"
msgstr ""

#: src/usage_text.h:129
msgid ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."
msgstr ""

#: src/usage_text.h:134
msgid ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities.\n"
"                              Default: false"
msgstr ""

#: src/usage_text.h:139
msgid ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended.\n"
"                              Default: true"
msgstr ""

#: src/usage_text.h:146
msgid ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required.\n"
"                              Default: false"
msgstr ""

#: src/usage_text.h:158
msgid ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent "
"connection.\n"
"                              Default: false"
msgstr ""

#: src/usage_text.h:161
msgid ""
" --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining.\n"
"                              Default: false"
msgstr ""

#: src/usage_text.h:164
msgid ""
" --check-integrity=true|false  Check file integrity by validating piece "
"hash.\n"
"                              This option only affects in BitTorrent "
"downloads\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file.\n"
"                              Default: false"
msgstr ""

#: src/usage_text.h:171
msgid ""
" --realtime-chunk-checksum=true|false  Validate chunk checksum while\n"
"                              downloading a file in Metalink mode. This "
"option\n"
"                              on affects Metalink mode with chunk "
"checksums.\n"
"                              Default: true"
msgstr ""

#: src/usage_text.h:176
msgid ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."
msgstr ""

#: src/usage_text.h:183
msgid " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."
msgstr ""

#: src/usage_text.h:185
msgid " -n, --no-netrc               Disables netrc support."
msgstr ""

#: src/usage_text.h:187
msgid ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when '-' is specified."
msgstr ""

#: src/usage_text.h:192
msgid ""
" -j, --max-concurrent-downloads=N Set maximum number of concurrent "
"downloads.\n"
"                              It should be used with the -i option.\n"
"                              Default: 5"
msgstr ""

#: src/usage_text.h:196
msgid ""
" --load-cookies=FILE          Load cookies from FILE. The format of FILE is\n"
"                              the same used by Netscape and Mozilla."
msgstr ""

#: src/usage_text.h:199
msgid ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."
msgstr ""

#: src/usage_text.h:203
msgid ""
" --select-file=INDEX...       Set file to download by specifing its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: \"3,6\".\n"
"                              You can also use '-' to specify a range: \"1-5"
"\".\n"
"                              ',' and '-' can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."
msgstr ""

#: src/usage_text.h:212
msgid " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."
msgstr ""

#: src/usage_text.h:214
msgid ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:224
msgid ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file.\n"
"                              Default: true"
msgstr ""

#: src/usage_text.h:228
msgid ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""

#: src/usage_text.h:234
msgid ""
" --max-upload-limit=SPEED     Set max upload speed in bytes per sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              Default: 0"
msgstr ""

#: src/usage_text.h:239
msgid ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."
msgstr ""

#: src/usage_text.h:242
msgid ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO. 1.0 is\n"
"                              encouraged. Specify 0.0 if you intend to do\n"
"                              seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."
msgstr ""

#: src/usage_text.h:250
msgid ""
" --peer-id-prefix=PEERI_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20\n"
"                              bytes are used. If less than 20 bytes are\n"
"                              specified, the random alphabet characters are\n"
"                              added to make it's length 20 bytes.\n"
"                              Default: -aria2-"
msgstr ""

#: src/usage_text.h:258
msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."
msgstr ""

#: src/usage_text.h:260
msgid " --enable-dht[=true|false]    Enable DHT functionality."
msgstr ""

#: src/usage_text.h:262
msgid ""
" --dht-listen-port=PORT...    Set UDP listening port for DHT.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""

#: src/usage_text.h:268
msgid ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to DHT\n"
"                              network."
msgstr ""

#: src/usage_text.h:271
msgid ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses a lowest one which "
"satisfies\n"
"                              the given level."
msgstr ""

#: src/usage_text.h:276
msgid ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."
msgstr ""

#: src/usage_text.h:281
msgid " -M, --metalink-file=METALINK_FILE The file path to the .metalink file."
msgstr ""

#: src/usage_text.h:283
msgid ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously.\n"
"                              Default: 5"
msgstr ""

#: src/usage_text.h:287
msgid " --metalink-version=VERSION   The version of the file to download."
msgstr ""

#: src/usage_text.h:289
msgid " --metalink-language=LANGUAGE The language of the file to download."
msgstr ""

#: src/usage_text.h:291
msgid ""
" --metalink-os=OS             The operating system of the file to download."
msgstr ""

#: src/usage_text.h:293
msgid ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-deliminated list of locations is\n"
"                              acceptable."
msgstr ""

#: src/usage_text.h:297
msgid ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. The "
"possible\n"
"                              values are 'http', 'https', 'ftp' and 'none'.\n"
"                              Specifiy none to disable this feature."
msgstr ""

#: src/usage_text.h:301
msgid ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metaink or content type is\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:311
msgid ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."
msgstr ""

#: src/usage_text.h:317
msgid " -v, --version                Print the version number and exit."
msgstr ""

#: src/usage_text.h:319
msgid ""
" -h, --help[=CATEGORY]        Print usage and exit.\n"
"                              The help messages are classified in several\n"
"                              categories. For example, type \"--help=http\" "
"for\n"
"                              detailed explanation for the options related "
"to\n"
"                              http. If no matching category is found, "
"search\n"
"                              option name using a given word, in forward "
"match\n"
"                              and print the result."
msgstr ""

#: src/usage_text.h:327
msgid " --no-conf                    Disable loading aria2.conf file."
msgstr ""

#: src/usage_text.h:329
msgid ""
" --conf-path=PATH             Change the configuration file path to PATH."
msgstr ""

#: src/usage_text.h:331
msgid ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."
msgstr ""

#: src/BtSetup.cc:123
msgid "Errors occurred while binding port.\n"
msgstr ""

#: src/DownloadEngine.cc:296
msgid ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."
msgstr ""

#: src/DownloadEngine.cc:300
msgid "Emergency shutdown sequence commencing..."
msgstr ""

#: src/HelpItem.cc:40
msgid "                              Default: "
msgstr ""

#: src/HelpItem.cc:41
msgid "                              Tags: "
msgstr ""

#: src/HelpItem.cc:42
msgid "                              Available Values: "
msgstr ""

#: src/MultiUrlRequestInfo.cc:78
msgid "aria2 will resume download if the transfer is restarted."
msgstr ""

#: src/MultiUrlRequestInfo.cc:80
msgid ""
"If there are any errors, then see the log file. See '-l' option in help/man "
"page for details."
msgstr ""

#: src/RequestGroupMan.cc:258
msgid "Download Results:"
msgstr ""

#: src/RequestGroupMan.cc:273
msgid "Status Legend:"
msgstr ""

#: src/Util.cc:687
msgid "Files:"
msgstr ""

#: src/version_usage.cc:54
msgid " version "
msgstr ""

#: src/version_usage.cc:58
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2 of the License, or\n"
"(at your option) any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  "
"USA\n"
msgstr ""

#: src/version_usage.cc:93
#, c-format
msgid "Report bugs to %s"
msgstr ""

#: src/version_usage.cc:98
#, c-format
msgid "Usage: %s [options] URL ...\n"
msgstr ""

#: src/version_usage.cc:100
#, c-format
msgid "       %s [options] -T TORRENT_FILE URL ...\n"
msgstr ""

#: src/version_usage.cc:103
#, c-format
msgid "       %s [options] -M METALINK_FILE\n"
msgstr ""

#: src/version_usage.cc:112
#, c-format
msgid "Printing all options."
msgstr ""

#: src/version_usage.cc:114
#, c-format
msgid "Printing options tagged with '%s'."
msgstr ""

#: src/version_usage.cc:116
#, c-format
msgid "See -h option to know other command-line options(%s)."
msgstr ""

#: src/version_usage.cc:120 src/version_usage.cc:127
msgid "Options:"
msgstr ""

#: src/version_usage.cc:125
#, c-format
msgid "Printing options whose name starts with '%s'."
msgstr ""

#: src/version_usage.cc:130
#, c-format
msgid "No help category or option name matching with '%s'."
msgstr ""

#: src/version_usage.cc:138
msgid ""
" You can specify multiple URLs. Unless you specify -Z option, all URLs must\n"
" point to the same file or downloading will fail."
msgstr ""

#: src/version_usage.cc:140
msgid ""
" You can specify both torrent file with -T option and URLs. By doing this,\n"
" download a file from both torrent swarm and http/ftp server at the same "
"time,\n"
" while the data from http/ftp are uploaded to the torrent swarm. Note that\n"
" only single file torrent can be integrated with http/ftp."
msgstr ""

#: src/version_usage.cc:145
msgid ""
" Make sure that URL is quoted with single(') or double(\") quotation if it\n"
" contains \"&\" or any characters that have special meaning in shell."
msgstr ""

#: src/version_usage.cc:149
msgid "Refer to man page for more information."
msgstr ""