| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188 | 
							- # Configure paths for LIBXML2
 
- # Mike Hommey 2004-06-19
 
- # use CPPFLAGS instead of CFLAGS
 
- # Toshio Kuratomi 2001-04-21
 
- # Adapted from:
 
- # Configure paths for GLIB
 
- # Owen Taylor     97-11-3
 
- dnl AM_PATH_XML2([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
 
- dnl Test for XML, and define XML_CPPFLAGS and XML_LIBS
 
- dnl
 
- AC_DEFUN([AM_PATH_XML2],[ 
 
- AC_ARG_WITH(xml-prefix,
 
-             [  --with-xml-prefix=PFX   Prefix where libxml is installed (optional)],
 
-             xml_config_prefix="$withval", xml_config_prefix="")
 
- AC_ARG_WITH(xml-exec-prefix,
 
-             [  --with-xml-exec-prefix=PFX Exec prefix where libxml is installed (optional)],
 
-             xml_config_exec_prefix="$withval", xml_config_exec_prefix="")
 
- AC_ARG_ENABLE(xmltest,
 
-               [  --disable-xmltest       Do not try to compile and run a test LIBXML program],,
 
-               enable_xmltest=yes)
 
-   if test x$xml_config_exec_prefix != x ; then
 
-      xml_config_args="$xml_config_args"
 
-      if test x${XML2_CONFIG+set} != xset ; then
 
-         XML2_CONFIG=$xml_config_exec_prefix/bin/xml2-config
 
-      fi
 
-   fi
 
-   if test x$xml_config_prefix != x ; then
 
-      xml_config_args="$xml_config_args --prefix=$xml_config_prefix"
 
-      if test x${XML2_CONFIG+set} != xset ; then
 
-         XML2_CONFIG=$xml_config_prefix/bin/xml2-config
 
-      fi
 
-   fi
 
-   AC_PATH_PROG(XML2_CONFIG, xml2-config, no)
 
-   min_xml_version=ifelse([$1], ,2.0.0,[$1])
 
-   AC_MSG_CHECKING(for libxml - version >= $min_xml_version)
 
-   no_xml=""
 
-   if test "$XML2_CONFIG" = "no" ; then
 
-     no_xml=yes
 
-   else
 
-     XML_CPPFLAGS=`$XML2_CONFIG $xml_config_args --cflags`
 
-     XML_LIBS=`$XML2_CONFIG $xml_config_args --libs`
 
-     xml_config_major_version=`$XML2_CONFIG $xml_config_args --version | \
 
-            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
 
-     xml_config_minor_version=`$XML2_CONFIG $xml_config_args --version | \
 
-            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
 
-     xml_config_micro_version=`$XML2_CONFIG $xml_config_args --version | \
 
-            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
 
-     if test "x$enable_xmltest" = "xyes" ; then
 
-       ac_save_CPPFLAGS="$CPPFLAGS"
 
-       ac_save_LIBS="$LIBS"
 
-       CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS"
 
-       LIBS="$XML_LIBS $LIBS"
 
- dnl
 
- dnl Now check if the installed libxml is sufficiently new.
 
- dnl (Also sanity checks the results of xml2-config to some extent)
 
- dnl
 
-       rm -f conf.xmltest
 
-       AC_TRY_RUN([
 
- #include <stdlib.h>
 
- #include <stdio.h>
 
- #include <string.h>
 
- #include <libxml/xmlversion.h>
 
- int 
 
- main()
 
- {
 
-   int xml_major_version, xml_minor_version, xml_micro_version;
 
-   int major, minor, micro;
 
-   char *tmp_version;
 
-   system("touch conf.xmltest");
 
-   /* Capture xml2-config output via autoconf/configure variables */
 
-   /* HP/UX 9 (%@#!) writes to sscanf strings */
 
-   tmp_version = (char *)strdup("$min_xml_version");
 
-   if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
 
-      printf("%s, bad version string from xml2-config\n", "$min_xml_version");
 
-      exit(1);
 
-    }
 
-    free(tmp_version);
 
-    /* Capture the version information from the header files */
 
-    tmp_version = (char *)strdup(LIBXML_DOTTED_VERSION);
 
-    if (sscanf(tmp_version, "%d.%d.%d", &xml_major_version, &xml_minor_version, &xml_micro_version) != 3) {
 
-      printf("%s, bad version string from libxml includes\n", "LIBXML_DOTTED_VERSION");
 
-      exit(1);
 
-    }
 
-    free(tmp_version);
 
-  /* Compare xml2-config output to the libxml headers */
 
-   if ((xml_major_version != $xml_config_major_version) ||
 
-       (xml_minor_version != $xml_config_minor_version) ||
 
-       (xml_micro_version != $xml_config_micro_version))
 
-     {
 
-       printf("*** libxml header files (version %d.%d.%d) do not match\n",
 
-          xml_major_version, xml_minor_version, xml_micro_version);
 
-       printf("*** xml2-config (version %d.%d.%d)\n",
 
-          $xml_config_major_version, $xml_config_minor_version, $xml_config_micro_version);
 
-       return 1;
 
-     } 
 
- /* Compare the headers to the library to make sure we match */
 
-   /* Less than ideal -- doesn't provide us with return value feedback, 
 
-    * only exits if there's a serious mismatch between header and library.
 
-    */
 
-     LIBXML_TEST_VERSION;
 
-     /* Test that the library is greater than our minimum version */
 
-     if ((xml_major_version > major) ||
 
-         ((xml_major_version == major) && (xml_minor_version > minor)) ||
 
-         ((xml_major_version == major) && (xml_minor_version == minor) &&
 
-         (xml_micro_version >= micro)))
 
-       {
 
-         return 0;
 
-        }
 
-      else
 
-       {
 
-         printf("\n*** An old version of libxml (%d.%d.%d) was found.\n",
 
-                xml_major_version, xml_minor_version, xml_micro_version);
 
-         printf("*** You need a version of libxml newer than %d.%d.%d. The latest version of\n",
 
-            major, minor, micro);
 
-         printf("*** libxml is always available from ftp://ftp.xmlsoft.org.\n");
 
-         printf("***\n");
 
-         printf("*** If you have already installed a sufficiently new version, this error\n");
 
-         printf("*** probably means that the wrong copy of the xml2-config shell script is\n");
 
-         printf("*** being found. The easiest way to fix this is to remove the old version\n");
 
-         printf("*** of LIBXML, but you can also set the XML2_CONFIG environment to point to the\n");
 
-         printf("*** correct copy of xml2-config. (In this case, you will have to\n");
 
-         printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
 
-         printf("*** so that the correct libraries are found at run-time))\n");
 
-     }
 
-   return 1;
 
- }
 
- ],, no_xml=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
 
-        CPPFLAGS="$ac_save_CPPFLAGS"
 
-        LIBS="$ac_save_LIBS"
 
-      fi
 
-   fi
 
-   if test "x$no_xml" = x ; then
 
-      AC_MSG_RESULT(yes (version $xml_config_major_version.$xml_config_minor_version.$xml_config_micro_version))
 
-      ifelse([$2], , :, [$2])     
 
-   else
 
-      AC_MSG_RESULT(no)
 
-      if test "$XML2_CONFIG" = "no" ; then
 
-        echo "*** The xml2-config script installed by LIBXML could not be found"
 
-        echo "*** If libxml was installed in PREFIX, make sure PREFIX/bin is in"
 
-        echo "*** your path, or set the XML2_CONFIG environment variable to the"
 
-        echo "*** full path to xml2-config."
 
-      else
 
-        if test -f conf.xmltest ; then
 
-         :
 
-        else
 
-           echo "*** Could not run libxml test program, checking why..."
 
-           CPPFLAGS="$CPPFLAGS $XML_CPPFLAGS"
 
-           LIBS="$LIBS $XML_LIBS"
 
-           AC_TRY_LINK([
 
- #include <libxml/xmlversion.h>
 
- #include <stdio.h>
 
- ],      [ LIBXML_TEST_VERSION; return 0;],
 
-         [ echo "*** The test program compiled, but did not run. This usually means"
 
-           echo "*** that the run-time linker is not finding LIBXML or finding the wrong"
 
-           echo "*** version of LIBXML. If it is not finding LIBXML, you'll need to set your"
 
-           echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
 
-           echo "*** to the installed location  Also, make sure you have run ldconfig if that"
 
-           echo "*** is required on your system"
 
-           echo "***"
 
-           echo "*** If you have an old version installed, it is best to remove it, although"
 
-           echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" ],
 
-         [ echo "*** The test program failed to compile or link. See the file config.log for the"
 
-           echo "*** exact error that occured. This usually means LIBXML was incorrectly installed"
 
-           echo "*** or that you have moved LIBXML since it was installed. In the latter case, you"
 
-           echo "*** may want to edit the xml2-config script: $XML2_CONFIG" ])
 
-           CPPFLAGS="$ac_save_CPPFLAGS"
 
-           LIBS="$ac_save_LIBS"
 
-        fi
 
-      fi
 
-      XML_CPPFLAGS=""
 
-      XML_LIBS=""
 
-      ifelse([$3], , :, [$3])
 
-   fi
 
-   AC_SUBST(XML_CPPFLAGS)
 
-   AC_SUBST(XML_LIBS)
 
-   rm -f conf.xmltest
 
- ])
 
 
  |