aria2/po/da.po

# Danish translation for aria2
# Copyright (c) 2008 Rosetta Contributors and Canonical Ltd 2008
# This file is distributed under the same license as the aria2 package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2008.
#
msgid ""
msgstr ""
"Project-Id-Version: aria2\n"
"Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n"
"POT-Creation-Date: 2008-09-22 19:31+0900\n"
"PO-Revision-Date: 2008-08-09 20:45+0000\n"
"Last-Translator: Jeppe Toustrup <launchpad@tenzer.dk>\n"
"Language-Team: Danish <da@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2008-08-15 12:32+0000\n"
"X-Generator: Launchpad (build Unknown)\n"

#: src/DownloadEngine.cc:800
msgid ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."
msgstr "Afslutningsprocedure i gang... Tryk Ctrl-C igen for nød-afslutning."

#: src/DownloadEngine.cc:804
msgid "Emergency shutdown sequence commencing..."
msgstr "Nød-afslutningsprocedure i gang..."

#: src/MultiUrlRequestInfo.cc:88
msgid "aria2 will resume download if the transfer is restarted."
msgstr "aria2 vil forsætte filhentningen hvis overførslen bliver genstartet."

#: src/MultiUrlRequestInfo.cc:90
msgid ""
"If there are any errors, then see the log file. See '-l' option in help/man "
"page for details."
msgstr ""
"Hvis der er nogle fejl, så kig i logfilen. Se '-l' flaget i hjælp/man siden "
"for mere information."

#: src/RequestGroupMan.cc:379
msgid "Download Results:"
msgstr "Overførsels resultater:"

#: src/RequestGroupMan.cc:394
msgid "Status Legend:"
msgstr "Status forklaring:"

#: src/OptionHandler.cc:38
msgid "                              Default: "
msgstr "                              Standard: "

#: src/OptionHandler.cc:39
msgid "                              Tags: "
msgstr "                              Mærker: "

#: src/OptionHandler.cc:40
#, fuzzy
msgid "                              Possible Values: "
msgstr "                              Mulige værdier: "

#: src/OptionHandlerImpl.h:95
msgid "must be either 'true' or 'false'."
msgstr "skal enten være 'true' (sand) eller 'false' (falsk)"

#: src/OptionHandlerImpl.h:126 src/OptionHandlerImpl.h:173
#, c-format
msgid "must be between %s and %s."
msgstr "skal være i mellem %s og %s."

#: src/OptionHandlerImpl.h:170
#, c-format
msgid "must be smaller than or equal to %s."
msgstr "skal være mindre end eller lig med %s."

#: src/OptionHandlerImpl.h:176
#, c-format
msgid "must be greater than or equal to %s."
msgstr "skal være større end eller lig med %s."

#: src/OptionHandlerImpl.h:179 src/OptionHandlerImpl.h:242
msgid "must be a number."
msgstr "skal være et tal."

#: src/OptionHandlerImpl.h:233
#, c-format
msgid "must be smaller than or equal to %.1f."
msgstr "skal være mindre end eller lig med %.1f."

#: src/OptionHandlerImpl.h:236
#, c-format
msgid "must be between %.1f and %.1f."
msgstr "skal være i mellem %.1f og %.1f."

#: src/OptionHandlerImpl.h:239
#, c-format
msgid "must be greater than or equal to %.1f."
msgstr "skal være større end eller lig med %.1f."

#: src/OptionHandlerImpl.h:376
msgid "must be one of the following:"
msgstr "skal være en af de følgende:"

#: src/OptionHandlerImpl.h:423
msgid "unrecognized proxy format"
msgstr "ukendt proxy format"

#: src/usage_text.h:37
msgid ""
" -d, --dir=DIR                The directory to store the downloaded file."
msgstr " -d, --dir=MAPPE              Mappen hvor den hentede fil skal gemmes."

#: src/usage_text.h:39
msgid " -o, --out=FILE               The file name of the downloaded file."
msgstr " -o, --out=FIL                Filnavnet for den hentede fil."

#: src/usage_text.h:41
msgid ""
" -l, --log=LOG                The file name of the log file. If '-' is\n"
"                              specified, log is written to stdout."
msgstr ""
" -l, --log=LOG                Filnavn for logfilen. Hvis den er sat til '-'\n"
"                              vil loggen blive skrevet til standarduddata."

#: src/usage_text.h:44
msgid " -D, --daemon                 Run as daemon."
msgstr " -D, --daemon                 Kør som en dæmon."

#: src/usage_text.h:46
msgid ""
" -s, --split=N                Download a file using N connections. If more\n"
"                              than N URLs are given, first N URLs are used "
"and\n"
"                              remaining URLs are used for backup. If less "
"than\n"
"                              N URLs are given, those URLs are used more "
"than\n"
"                              once so that N connections total are made\n"
"                              simultaneously. Please see -j option too."
msgstr ""
" -s, --split=N                Hent en fil ved brug af N forbindelser. Hvis\n"
"                              der er angivet flere adresser end N, vil de N\n"
"                              første adresser blive brugt, og resten vil "
"blive\n"
"                              brugt som reserve. Hvis færre end N adresser "
"er\n"
"                              angivet, vil adresserne blive brugt flere "
"gange,\n"
"                              så der totalt er N samtidige forbindelser.\n"
"                              Se også -j flaget."

#: src/usage_text.h:53
#, fuzzy
msgid ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured."
msgstr ""
" --retry-wait=SEK             Sæt antallet af sekunder der skal ventes "
"inden\n"
"                              der bliver forsøgt igen efter en fejl. Sæt en\n"
"                              værdi i mellem 0 og 60. Standard: 5"

#: src/usage_text.h:56
#, fuzzy
msgid " -t, --timeout=SEC            Set timeout in seconds."
msgstr " -t, --timeout=SEK            Sæt tidsudløb i sekunder. Standard: 60"

#: src/usage_text.h:58
#, fuzzy
msgid " -m, --max-tries=N            Set number of tries. 0 means unlimited."
msgstr ""
" -m, --max-tries=N            Sæt antallet af forsøg. 0 betyder ubegrænset.\n"
"                              Standard: 5"

#: src/usage_text.h:60
msgid ""
" --http-proxy=HOST:PORT       Use HTTP proxy server. This affects all URLs."
msgstr ""
" --http-proxy=VÆRT:PORT       Brug HTTP proxy server. Dette rammer alle "
"URL'er."

#: src/usage_text.h:62
msgid " --http-user=USER             Set HTTP user. This affects all URLs."
msgstr ""
" --http-user=BRUGER           Sæt HTTP bruger. Dette rammer alle URL'er."

#: src/usage_text.h:64
msgid " --http-passwd=PASSWD         Set HTTP password. This affects all URLs."
msgstr ""
" --http-passwd=KODE           Sæt HTTP kodeord. Dette rammer alle URL'er."

#: src/usage_text.h:66
msgid ""
" --http-proxy-user=USER       Set HTTP proxy user. This affects all URLs."
msgstr ""
" --http-proxy-user=BRUGER     Sæt HTTP proxy bruger. Dette rammer alle "
"URL'er."

#: src/usage_text.h:68
msgid ""
" --http-proxy-passwd=PASSWD   Set HTTP proxy password. This affects all URLs."
msgstr ""
" --http-proxy-passwd=KODE     Sæt HTTP proxy kodeord. Dette rammer alle "
"URL'er."

#: src/usage_text.h:70
msgid " --http-proxy-method=METHOD   Set the method to use in proxy request."
msgstr ""

#: src/usage_text.h:72
#, fuzzy
msgid ""
" --http-auth-scheme=SCHEME    Set HTTP authentication scheme. Currently, "
"basic\n"
"                              is the only supported scheme."
msgstr ""
" --http-auth-scheme=SKEMA     Sæt HTTP godkendelses skema. Lige nu er, "
"basic\n"
"                              det eneste understøttede skema.\n"
"                              Standard: basic"

#: src/usage_text.h:75
msgid " --referer=REFERER            Set Referer. This affects all URLs."
msgstr ""
" --referer=HENVISER           Sæt henviser. Dette vil ramme alle URL'er."

#: src/usage_text.h:77
#, fuzzy
msgid " --ftp-user=USER              Set FTP user. This affects all URLs."
msgstr ""
" --http-user=BRUGER           Sæt HTTP bruger. Dette rammer alle URL'er."

#: src/usage_text.h:79
#, fuzzy
msgid " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs."
msgstr ""
" --http-passwd=KODE           Sæt HTTP kodeord. Dette rammer alle URL'er."

#: src/usage_text.h:81
msgid " --ftp-type=TYPE              Set FTP transfer type."
msgstr ""

#: src/usage_text.h:83
msgid " -p, --ftp-pasv               Use passive mode in FTP."
msgstr " -p, --ftp-pasv               Brug passiv tilstand i FTP."

#: src/usage_text.h:85
msgid " --ftp-via-http-proxy=METHOD  Use HTTP proxy in FTP."
msgstr ""

#: src/usage_text.h:87
#, fuzzy
msgid ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads."
msgstr ""
" --lowest-speed-limit=FART    Luk forbindelsen hvis overførselshastigheden "
"er\n"
"                              lavere eller lig denne værdig (bytes per "
"sekund).\n"
"                              0 betyder aria2 ikke har en "
"minimumshastighed.\n"
"                              Du kan tilføje K eller M (1K = 1024, 1M = "
"1024K).\n"
"                              Dette flag vedrører ikke BitTorrent "
"overførsler.\n"
"                              Standard: 0"

#: src/usage_text.h:93
#, fuzzy
msgid ""
" --max-download-limit=SPEED   Set max download speed in bytes per sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --max-download-limit=FART    Sæt maksimal overførselshastighed i bytes per\n"
"                              sekund. 0 betyder ubegrænset.\n"
"                              Du kan tilføje K eller M (1K = 1024, 1M = "
"1024K).\n"
"                              Standard: 0"

#: src/usage_text.h:97
#, fuzzy
msgid ""
" --file-allocation=METHOD     Specify file allocation method.\n"
"                              'none' doesn't pre-allocate file space. "
"'prealloc'\n"
"                              pre-allocates file space before download "
"begins.\n"
"                              This may take some time depending on the size "
"of\n"
"                              the file."
msgstr ""
" --file-allocation=METODE     Vælg fil-allokerings metode. METODE er enten\n"
"                              'none' eller 'prealloc'. 'none' allokerer "
"ikke\n"
"                              filpladsen. 'prealloc' forud allokerer "
"pladsen\n"
"                              før overførslen begynder. Dette kan tage "
"noget\n"
"                              tid, afhængig af størrelsen på filen.\n"
"                              Standard: prealloc"

#: src/usage_text.h:103
msgid ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --no-file-allocation-limit=STR Ingen filallokering vil blive lavet for "
"filer\n"
"                              hvis størrelse er mindre end STR.\n"
"                              Du kan tilføje K eller M (1K = 1024, 1M = "
"1024K)."

#: src/usage_text.h:107
msgid ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"
msgstr ""

#: src/usage_text.h:111
msgid ""
" --allow-overwrite=true|false If false, aria2 doesn't download a file which\n"
"                              already exists but the corresponding .aria2 "
"file\n"
"                              doesn't exist."
msgstr ""

#: src/usage_text.h:115
msgid ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."
msgstr ""

#: src/usage_text.h:120
msgid ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities."
msgstr ""

#: src/usage_text.h:124
msgid ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended."
msgstr ""

#: src/usage_text.h:130
msgid ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required."
msgstr ""

#: src/usage_text.h:141
msgid ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection."
msgstr ""

#: src/usage_text.h:143
msgid " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining."
msgstr ""

#: src/usage_text.h:145
msgid ""
" --check-integrity=true|false  Check file integrity by validating piece "
"hash.\n"
"                              This option only affects in BitTorrent "
"downloads\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file."
msgstr ""

#: src/usage_text.h:151
msgid ""
" --realtime-chunk-checksum=true|false  Validate chunk checksum while\n"
"                              downloading a file in Metalink mode. This "
"option\n"
"                              on affects Metalink mode with chunk checksums."
msgstr ""

#: src/usage_text.h:155
msgid ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."
msgstr ""

#: src/usage_text.h:162
msgid " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."
msgstr ""

#: src/usage_text.h:164
msgid " -n, --no-netrc               Disables netrc support."
msgstr ""

#: src/usage_text.h:166
msgid ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when '-' is specified."
msgstr ""

#: src/usage_text.h:171
msgid ""
" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads "
"for\n"
"                              every static (HTTP/FTP) URL, torrent and "
"metalink."
msgstr ""

#: src/usage_text.h:174
msgid ""
" --load-cookies=FILE          Load Cookies from FILE using the Firefox3 "
"format\n"
"                              and Mozilla/Firefox(1.x/2.x)/Netscape format."
msgstr ""

#: src/usage_text.h:177
msgid ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."
msgstr ""

#: src/usage_text.h:181
msgid ""
" --select-file=INDEX...       Set file to download by specifing its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: \"3,6\".\n"
"                              You can also use '-' to specify a range: \"1-5"
"\".\n"
"                              ',' and '-' can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."
msgstr ""

#: src/usage_text.h:190
msgid " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."
msgstr ""

#: src/usage_text.h:192
msgid ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:202
msgid ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file."
msgstr ""

#: src/usage_text.h:205
msgid ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""

#: src/usage_text.h:211
#, fuzzy
msgid ""
" --max-upload-limit=SPEED     Set max upload speed in bytes per sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --max-download-limit=FART    Sæt maksimal overførselshastighed i bytes per\n"
"                              sekund. 0 betyder ubegrænset.\n"
"                              Du kan tilføje K eller M (1K = 1024, 1M = "
"1024K).\n"
"                              Standard: 0"

#: src/usage_text.h:215
msgid ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."
msgstr ""

#: src/usage_text.h:218
msgid ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO. 1.0 is\n"
"                              encouraged. Specify 0.0 if you intend to do\n"
"                              seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."
msgstr ""

#: src/usage_text.h:226
msgid ""
" --peer-id-prefix=PEERI_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20\n"
"                              bytes are used. If less than 20 bytes are\n"
"                              specified, the random alphabet characters are\n"
"                              added to make it's length 20 bytes."
msgstr ""

#: src/usage_text.h:233
msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."
msgstr ""

#: src/usage_text.h:235
msgid " --enable-dht[=true|false]    Enable DHT functionality."
msgstr ""

#: src/usage_text.h:237
msgid ""
" --dht-listen-port=PORT...    Set UDP listening port for DHT.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""

#: src/usage_text.h:243
msgid ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to DHT\n"
"                              network."
msgstr ""

#: src/usage_text.h:246
msgid ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses a lowest one which "
"satisfies\n"
"                              the given level."
msgstr ""

#: src/usage_text.h:251
msgid ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."
msgstr ""

#: src/usage_text.h:256
msgid ""
" --bt-request-peer-speed-limit=SPEED In BitTorrent downloads, if the "
"download\n"
"                              speed is lower than SPEED, aria2 initiates "
"and\n"
"                              accepts connections ignoring max peer cap.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""

#: src/usage_text.h:261
msgid ""
" --bt-max-open-files=NUM      Specify maximum number of files to open in "
"each\n"
"                              BitTorrent download."
msgstr ""

#: src/usage_text.h:264
msgid ""
" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"
"                              verifying piece hashes."
msgstr ""

#: src/usage_text.h:267
msgid " -M, --metalink-file=METALINK_FILE The file path to the .metalink file."
msgstr ""

#: src/usage_text.h:269
msgid ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously."
msgstr ""

#: src/usage_text.h:272
msgid " --metalink-version=VERSION   The version of the file to download."
msgstr ""

#: src/usage_text.h:274
msgid " --metalink-language=LANGUAGE The language of the file to download."
msgstr ""

#: src/usage_text.h:276
msgid ""
" --metalink-os=OS             The operating system of the file to download."
msgstr ""

#: src/usage_text.h:278
msgid ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-deliminated list of locations is\n"
"                              acceptable."
msgstr ""

#: src/usage_text.h:282
msgid ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specifiy "
"'none'\n"
"                              if you don't have any preferred protocol."
msgstr ""

#: src/usage_text.h:285
msgid ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metaink or content type is\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:295
msgid ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."
msgstr ""

#: src/usage_text.h:301
msgid " -v, --version                Print the version number and exit."
msgstr ""

#: src/usage_text.h:303
msgid ""
" -h, --help[=CATEGORY]        Print usage and exit.\n"
"                              The help messages are classified in several\n"
"                              categories. For example, type \"--help=http\" "
"for\n"
"                              detailed explanation for the options related "
"to\n"
"                              http. If no matching category is found, "
"search\n"
"                              option name using a given word in middle "
"match\n"
"                              and print the result."
msgstr ""

#: src/usage_text.h:311
msgid " --no-conf                    Disable loading aria2.conf file."
msgstr ""

#: src/usage_text.h:313
msgid ""
" --conf-path=PATH             Change the configuration file path to PATH."
msgstr ""

#: src/usage_text.h:315
msgid ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."
msgstr ""

#: src/usage_text.h:318
msgid ""
" --header=HEADER              Append HEADER to HTTP request header. You can "
"use\n"
"                              this option repeatedly to specify more than "
"one\n"
"                              header:\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"
msgstr ""

#: src/usage_text.h:324
msgid " -q, --quiet[=true|false]     Make aria2 quite (no console output)."
msgstr ""

#: src/usage_text.h:326
msgid " --async-dns[=true|false]     Enable asynchronous DNS."
msgstr ""

#: src/usage_text.h:328
msgid " --ftp-reuse-connection[=true|false] Reuse connection in FTP."
msgstr ""

#: src/usage_text.h:330
msgid ""
" --summary-interval=SEC       Set interval to output download progress "
"summary.\n"
"                              Setting 0 suppresses the output."
msgstr ""

#: src/usage_text.h:333
msgid " --log-level=LEVEL            Set log level to output."
msgstr ""

#: src/usage_text.h:335
msgid ""
" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from "
"the\n"
"                              remote HTTP/FTP server and if it is "
"available,\n"
"                              apply it to the local file."
msgstr ""

#: src/usage_text.h:339
msgid ""
" --connect-timeout=SEC        Set the connect timeout in seconds to "
"establish\n"
"                              connection to HTTP/FTP/proxy server. After "
"the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --timeout option is used instead."
msgstr ""

#: src/usage_text.h:344
#, fuzzy
msgid ""
" --max-file-not-found=NUM     If aria2 recieves `file not found' status from "
"the\n"
"                              remote HTTP/FTP servers NUM times without "
"getting\n"
"                              a single byte, then force the download to "
"fail.\n"
"                              Specify 0 to disable this option.\n"
"                              This options is only effective only when "
"using\n"
"                              HTTP/FTP servers."
msgstr ""
" --file-allocation=METODE     Vælg fil-allokerings metode. METODE er enten\n"
"                              'none' eller 'prealloc'. 'none' allokerer "
"ikke\n"
"                              filpladsen. 'prealloc' forud allokerer "
"pladsen\n"
"                              før overførslen begynder. Dette kan tage "
"noget\n"
"                              tid, afhængig af størrelsen på filen.\n"
"                              Standard: prealloc"

#: src/usage_text.h:351
msgid ""
" --uri-selector=SELECTOR      Specify URI selection algorithm.\n"
"                              If 'inorder' is given, URI is tried in the "
"order\n"
"                              appeared in the URI list.\n"
"                              If 'feedback' is given, aria2 uses download "
"speed\n"
"                              observed in the previous downloads and choose\n"
"                              fastest server in the URI list. This also\n"
"                              effectively skips dead mirrors. The observed\n"
"                              download speed is a part of performance "
"profile\n"
"                              of servers mentioned in --server-stat-of and\n"
"                              --server-stat-if options."
msgstr ""

#: src/usage_text.h:362
#, fuzzy
msgid ""
" --server-stat-of=FILE        Specify the filename to which performance "
"profile\n"
"                              of the servers is saved. You can load saved "
"data\n"
"                              using --server-stat-if option."
msgstr ""
" --retry-wait=SEK             Sæt antallet af sekunder der skal ventes "
"inden\n"
"                              der bliver forsøgt igen efter en fejl. Sæt en\n"
"                              værdi i mellem 0 og 60. Standard: 5"

#: src/usage_text.h:366
msgid ""
" --server-stat-if=FILE        Specify the filename to load performance "
"profile\n"
"                              of the servers. The loaded data will be used "
"in\n"
"                              some URI selector such as 'feedback'.\n"
"                              See also --uri-selector option"
msgstr ""

#: src/usage_text.h:371
#, fuzzy
msgid ""
" --server-stat-timeout=SEC    Specifies timeout in seconds to invalidate\n"
"                              performance profile of the servers since the "
"last\n"
"                              contact to them."
msgstr ""
" --retry-wait=SEK             Sæt antallet af sekunder der skal ventes "
"inden\n"
"                              der bliver forsøgt igen efter en fejl. Sæt en\n"
"                              værdi i mellem 0 og 60. Standard: 5"

#: src/version_usage.cc:54
msgid " version "
msgstr ""

#: src/version_usage.cc:71
#, c-format
msgid "Report bugs to %s"
msgstr ""

#: src/version_usage.cc:76
#, c-format
msgid "Usage: %s [OPTIONS] [URL | TORRENT_FILE | METALINK_FILE]..."
msgstr ""

#: src/version_usage.cc:86
#, c-format
msgid "Printing options whose name includes '%s'."
msgstr ""

#: src/version_usage.cc:89 src/version_usage.cc:111
msgid "Options:"
msgstr ""

#: src/version_usage.cc:94
#, c-format
msgid "No help category or option name matching with '%s'."
msgstr ""

#: src/version_usage.cc:100
msgid "Printing all options."
msgstr ""

#: src/version_usage.cc:102
#, c-format
msgid "Printing options tagged with '%s'."
msgstr ""

#: src/version_usage.cc:106
#, c-format
msgid "See -h option to know other command-line options(%s)."
msgstr ""

#: src/version_usage.cc:121
msgid ""
" You can specify multiple URLs. Unless you specify -Z option, all URLs must\n"
" point to the same file or downloading will fail."
msgstr ""

#: src/version_usage.cc:123
msgid ""
" You can also specify arbitrary number of torrent files and metalink files\n"
" stored in a local drive. Please note that they are always treated as a\n"
" separate download."
msgstr ""

#: src/version_usage.cc:128
msgid ""
" You can specify both torrent file with -T option and URLs. By doing this,\n"
" download a file from both torrent swarm and http/ftp server at the same "
"time,\n"
" while the data from http/ftp are uploaded to the torrent swarm. Note that\n"
" only single file torrent can be integrated with http/ftp."
msgstr ""

#: src/version_usage.cc:133
msgid ""
" Make sure that URL is quoted with single(') or double(\") quotation if it\n"
" contains \"&\" or any characters that have special meaning in shell."
msgstr ""

#: src/version_usage.cc:137
msgid "Refer to man page for more information."
msgstr ""

#: src/message.h:40
#, c-format
msgid "CUID#%d - The download for one segment completed successfully."
msgstr ""

#: src/message.h:41
#, c-format
msgid "CUID#%d - No segment available."
msgstr ""

#: src/message.h:42
#, c-format
msgid "CUID#%d - Connecting to %s:%d"
msgstr ""

#: src/message.h:43
#, c-format
msgid ""
"CUID#%d - The segment changed. We send the request again with new Range "
"header."
msgstr ""

#: src/message.h:44
#, c-format
msgid "CUID#%d - Redirecting to %s"
msgstr ""

#: src/message.h:45
#, c-format
msgid ""
"CUID#%d - Requesting:\n"
"%s"
msgstr ""

#: src/message.h:46
#, c-format
msgid ""
"CUID#%d - Response received:\n"
"%s"
msgstr ""

#: src/message.h:47
#, c-format
msgid "CUID#%d - Download aborted. URI=%s"
msgstr ""

#: src/message.h:48
#, c-format
msgid "CUID#%d - Restarting the download. URI=%s"
msgstr ""

#: src/message.h:49
#, c-format
msgid "CUID#%d - Download aborted."
msgstr ""

#: src/message.h:50
#, c-format
msgid "CUID#%d - %d times attempted, but no success. Download aborted."
msgstr ""

#: src/message.h:51
#, c-format
msgid "CUID#%d - Unregistering cuid from segmentManager."
msgstr ""

#: src/message.h:57
#, c-format
msgid "CUID#%d - we got new piece. index=%d"
msgstr ""

#: src/message.h:58
#, c-format
msgid "CUID#%d - we got wrong piece. index=%d"
msgstr ""

#: src/message.h:59
#, c-format
msgid "CUID#%d - Download not complete: %s"
msgstr ""

#: src/message.h:60
#, c-format
msgid "#%d - Download has already completed: %s"
msgstr ""

#: src/message.h:61
#, c-format
msgid "CUID#%d - Good checksum: %s"
msgstr ""

#: src/message.h:62
#, c-format
msgid "CUID#%d - Bad checksum: %s"
msgstr ""

#: src/message.h:63
#, c-format
msgid "CUID#%d - Resolving hostname %s"
msgstr ""

#: src/message.h:64
#, c-format
msgid "CUID#%d - Name resolution complete: %s -> %s"
msgstr ""

#: src/message.h:65
#, c-format
msgid "CUID#%d - Name resolution for %s failed:%s"
msgstr ""

#: src/message.h:66
#, c-format
msgid "CUID#%d - DNS cache hit: %s -> %s"
msgstr ""

#: src/message.h:67
#, c-format
msgid "CUID#%d - Abort requested."
msgstr ""

#: src/message.h:68
#, c-format
msgid "CUID#%d - Connecting to the peer %s"
msgstr ""

#: src/message.h:69
#, c-format
msgid ""
"CUID#%d - Piece received. index=%d, begin=%d, length=%d, offset=%llu, "
"blockIndex=%d"
msgstr ""

#: src/message.h:70
#, c-format
msgid "CUID#%d - Piece bitfield %s"
msgstr ""

#: src/message.h:71
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because the peer has been choked. "
"index=%d, begin=%d, length=%d"
msgstr ""

#: src/message.h:72
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because cancel message received. "
"index=%d, begin=%d, length=%d"
msgstr ""

#: src/message.h:73
#, c-format
msgid "CUID#%d - Exception caught while validating file integrity."
msgstr ""

#: src/message.h:74
#, c-format
msgid "CUID#%d - Interested in the peer"
msgstr ""

#: src/message.h:75
#, c-format
msgid "CUID#%d - Not interested in the peer"
msgstr ""

#: src/message.h:76
#, c-format
msgid "CUID#%d - Deleting request slot index=%d, blockIndex=%d"
msgstr ""

#: src/message.h:77
#, c-format
msgid ""
"CUID#%d - Deleting request slot index=%d, blockIndex=%d because localhost "
"got choked."
msgstr ""

#: src/message.h:78
#, c-format
msgid "CUID#%d - Deleting request slot blockIndex=%d because of time out"
msgstr ""

#: src/message.h:79
#, c-format
msgid ""
"CUID#%d - Deleting request slot blockIndex=%d because the block has been "
"acquired."
msgstr ""

#: src/message.h:80
#, c-format
msgid "CUID#%d - Fast extension enabled."
msgstr ""

#: src/message.h:81
#, c-format
msgid "CUID#%d - Extended Messaging enabled."
msgstr ""

#: src/message.h:82
#, c-format
msgid "CUID#%d - Exception caught while allocating file space."
msgstr ""

#: src/message.h:83
#, c-format
msgid "CUID#%d - Content-Disposition detected. Use %s as filename"
msgstr ""

#: src/message.h:84
#, c-format
msgid "CUID#%d - Peer %s:%d banned."
msgstr ""

#: src/message.h:85
#, c-format
msgid "CUID#%d - Using port %d for accepting new connections"
msgstr ""

#: src/message.h:86
#, c-format
msgid "CUID#%d - An error occurred while binding port=%d"
msgstr ""

#: src/message.h:87
#, c-format
msgid "CUID#%d - Incoming connection, adding new command CUID#%d"
msgstr ""

#: src/message.h:88
#, c-format
msgid "CUID#%d - Error in accepting connection"
msgstr ""

#: src/message.h:89
#, c-format
msgid "CUID#%d - Error occurred while processing tracker response."
msgstr ""

#: src/message.h:90
#, c-format
msgid "CUID#%d - Cannot create tracker request."
msgstr ""

#: src/message.h:91
#, c-format
msgid "CUID#%d - Creating new tracker request command #%d"
msgstr ""

#: src/message.h:92
#, c-format
msgid "CUID#%d - The peer is DHT-enabled."
msgstr ""

#: src/message.h:94
#, c-format
msgid "Unrecognized URI or unsupported protocol: %s"
msgstr ""

#: src/message.h:95
#, c-format
msgid "Tracker returned warning message: %s"
msgstr ""

#: src/message.h:96
#, c-format
msgid "The segment file %s exists."
msgstr ""

#: src/message.h:97
#, c-format
msgid "The segment file %s does not exist."
msgstr ""

#: src/message.h:98
#, c-format
msgid "Saving the segment file %s"
msgstr ""

#: src/message.h:99
msgid "The segment file was saved successfully."
msgstr ""

#: src/message.h:100
#, c-format
msgid "Loading the segment file %s."
msgstr ""

#: src/message.h:101
msgid "The segment file was loaded successfully."
msgstr ""

#: src/message.h:102
msgid "No URI to download. Download aborted."
msgstr ""

#: src/message.h:103
#, c-format
msgid ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."
msgstr ""

#: src/message.h:104
#, c-format
msgid "Allocating file %s, %s bytes"
msgstr ""

#: src/message.h:105
msgid "File not found"
msgstr ""

#: src/message.h:106
msgid "Not a directory"
msgstr ""

#: src/message.h:107
#, c-format
msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d"
msgstr ""

#: src/message.h:108
#, c-format
msgid "Writing file %s"
msgstr ""

#: src/message.h:109
msgid "No peer list received."
msgstr ""

#: src/message.h:110
#, c-format
msgid "Adding peer %s:%d"
msgstr ""

#: src/message.h:111
#, c-format
msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d"
msgstr ""

#: src/message.h:112
msgid "Download of selected files was complete."
msgstr ""

#: src/message.h:113
msgid "The download was complete."
msgstr ""

#: src/message.h:114
#, c-format
msgid "Removed %d have entries."
msgstr ""

#: src/message.h:115
#, c-format
msgid "Validating file %s"
msgstr ""

#: src/message.h:116
#, c-format
msgid "%d seconds to allocate %s byte(s)"
msgstr ""

#: src/message.h:117
#, c-format
msgid "Dispatching FileAllocationCommand for CUID#%d."
msgstr ""

#: src/message.h:118
#, c-format
msgid "Metalink: Queueing %s for download."
msgstr ""

#: src/message.h:119
#, c-format
msgid "Download complete: %s"
msgstr ""

#: src/message.h:120
msgid "Seeding is over."
msgstr ""

#: src/message.h:121
#, c-format
msgid "CUID#%d cancels segment index=%d. CUID#%d handles it instead."
msgstr ""

#: src/message.h:122
msgid "No chunk to verify."
msgstr ""

#: src/message.h:123
#, c-format
msgid "Good chunk checksum. hash=%s"
msgstr ""

#: src/message.h:124
#, c-format
msgid "Failed to load cookies from %s"
msgstr ""

#: src/message.h:125
#, c-format
msgid ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."
msgstr ""

#: src/message.h:126
msgid "Logging started."
msgstr ""

#: src/message.h:127
msgid "Specify at least one URL."
msgstr ""

#: src/message.h:128
msgid "daemon failed."
msgstr ""

#: src/message.h:129
#, c-format
msgid "Verification finished successfully. file=%s"
msgstr ""

#: src/message.h:130
#, c-format
msgid "Checksum error detected. file=%s"
msgstr ""

#: src/message.h:131
#, c-format
msgid "Incomplete range specified. %s"
msgstr ""

#: src/message.h:132
#, c-format
msgid "Failed to convert string into value: %s"
msgstr ""

#: src/message.h:133
msgid "Resource not found"
msgstr ""

#: src/message.h:134
#, c-format
msgid "File already exists. Renamed to %s."
msgstr ""

#: src/message.h:135
msgid "Cannot parse metalink XML file. XML may be malformed."
msgstr ""

#: src/message.h:136
#, c-format
msgid "Too small payload size for %s, size=%d."
msgstr ""

#: src/message.h:137
#, c-format
msgid ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."
msgstr ""

#: src/message.h:138
#, c-format
msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"
msgstr ""

#: src/message.h:139
#, c-format
msgid "Missing %s in torrent metainfo."
msgstr ""

#: src/message.h:140
msgid "Tracker returned null data."
msgstr ""

#: src/message.h:141
msgid "Windows socket library initialization failed"
msgstr ""

#: src/message.h:142
#, c-format
msgid "%d second(s) has passed. Stopping application."
msgstr ""

#: src/message.h:143
#, c-format
msgid ""
"Saved signature as %s. Please note that aria2 doesn't verify signatures."
msgstr ""

#: src/message.h:145
#, c-format
msgid "Saving signature as %s failed. Maybe file already exists."
msgstr ""

#: src/message.h:148
#, c-format
msgid "Failed to open ServerStat file %s for read."
msgstr ""

#: src/message.h:149
#, c-format
msgid "ServerStat file %s loaded successfully."
msgstr ""

#: src/message.h:150
#, c-format
msgid "Failed to read ServerStat from %s."
msgstr ""

#: src/message.h:153
#, c-format
msgid "Failed to open ServerStat file %s for write."
msgstr ""

#: src/message.h:154
#, c-format
msgid "ServerStat file %s saved successfully."
msgstr ""

#: src/message.h:155
#, c-format
msgid "Failed to write ServerStat to %s."
msgstr ""

#: src/message.h:158
#, c-format
msgid "Failed to establish connection, cause: %s"
msgstr ""

#: src/message.h:159
#, c-format
msgid "Network problem has occurred. cause:%s"
msgstr ""

#: src/message.h:161
msgid "Timeout."
msgstr ""

#: src/message.h:162
msgid "Invalid chunk size."
msgstr ""

#: src/message.h:163
#, c-format
msgid "Too large chunk. size=%d"
msgstr ""

#: src/message.h:164
msgid "Invalid header."
msgstr ""

#: src/message.h:165
msgid "Invalid response."
msgstr ""

#: src/message.h:166
msgid "No header found."
msgstr ""

#: src/message.h:167
msgid "No status header."
msgstr ""

#: src/message.h:168
msgid "Proxy connection failed."
msgstr ""

#: src/message.h:169
msgid "Connection failed."
msgstr ""

#: src/message.h:170
#, c-format
msgid ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"
msgstr ""

#: src/message.h:171
#, c-format
msgid "The response status is not successful. status=%d"
msgstr ""

#: src/message.h:172
#, c-format
msgid "Too large file size. size=%s"
msgstr ""

#: src/message.h:173
#, c-format
msgid "Transfer encoding %s is not supported."
msgstr ""

#: src/message.h:174
#, c-format
msgid "SSL initialization failed: %s"
msgstr ""

#: src/message.h:175
msgid "SSL I/O error"
msgstr ""

#: src/message.h:176
msgid "SSL protocol error"
msgstr ""

#: src/message.h:177
#, c-format
msgid "SSL unknown error %d"
msgstr ""

#: src/message.h:178
#, c-format
msgid "SSL initialization failed: OpenSSL connect error %d"
msgstr ""

#: src/message.h:179
#, c-format
msgid "Size mismatch Expected:%s Actual:%s"
msgstr ""

#: src/message.h:180
msgid "Authorization failed."
msgstr ""

#: src/message.h:181
msgid "Got EOF from the server."
msgstr ""

#: src/message.h:182
msgid "Got EOF from peer."
msgstr ""

#: src/message.h:183
msgid "Malformed meta info."
msgstr ""

#: src/message.h:185
#, c-format
msgid "Failed to open the file %s, cause: %s"
msgstr ""

#: src/message.h:186
#, c-format
msgid "Failed to write into the file %s, cause: %s"
msgstr ""

#: src/message.h:187
#, c-format
msgid "Failed to read from the file %s, cause: %s"
msgstr ""

#: src/message.h:188
msgid "Failed to read data from disk."
msgstr ""

#: src/message.h:189
#, c-format
msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"
msgstr ""

#: src/message.h:190
#, c-format
msgid "Failed to seek the file %s, cause: %s"
msgstr ""

#: src/message.h:191
#, c-format
msgid "The offset is out of range, offset=%s"
msgstr ""

#: src/message.h:192
#, c-format
msgid "%s is not a directory."
msgstr ""

#: src/message.h:193
#, c-format
msgid "Failed to make the directory %s, cause: %s"
msgstr ""

#: src/message.h:194
#, c-format
msgid "Failed to open the segment file %s, cause: %s"
msgstr ""

#: src/message.h:195
#, c-format
msgid "Failed to write into the segment file %s, cause: %s"
msgstr ""

#: src/message.h:196
#, c-format
msgid "Failed to read from the segment file %s, cause: %s"
msgstr ""

#: src/message.h:198
#, c-format
msgid "Failed to open a socket, cause: %s"
msgstr ""

#: src/message.h:199
#, c-format
msgid "Failed to set a socket option, cause: %s"
msgstr ""

#: src/message.h:200
#, c-format
msgid "Failed to set a socket as blocking, cause: %s"
msgstr ""

#: src/message.h:201
#, c-format
msgid "Failed to set a socket as non-blocking, cause: %s"
msgstr ""

#: src/message.h:202
#, c-format
msgid "Failed to bind a socket, cause: %s"
msgstr ""

#: src/message.h:203
#, c-format
msgid "Failed to listen to a socket, cause: %s"
msgstr ""

#: src/message.h:204
#, c-format
msgid "Failed to accept a peer connection, cause: %s"
msgstr ""

#: src/message.h:205
#, c-format
msgid "Failed to get the name of socket, cause: %s"
msgstr ""

#: src/message.h:206
#, c-format
msgid "Failed to get the name of connected peer, cause: %s"
msgstr ""

#: src/message.h:207
#, c-format
msgid "Failed to resolve the hostname %s, cause: %s"
msgstr ""

#: src/message.h:208
#, c-format
msgid "Failed to connect to the host %s, cause: %s"
msgstr ""

#: src/message.h:209
#, c-format
msgid "Failed to check whether the socket is writable, cause: %s"
msgstr ""

#: src/message.h:210
#, c-format
msgid "Failed to check whether the socket is readable, cause: %s"
msgstr ""

#: src/message.h:211
#, c-format
msgid "Failed to send data, cause: %s"
msgstr ""

#: src/message.h:212
#, c-format
msgid "Failed to receive data, cause: %s"
msgstr ""

#: src/message.h:213
#, c-format
msgid "Failed to peek data, cause: %s"
msgstr ""

#: src/message.h:214
#, c-format
msgid "Unknown socket error %d (0x%x)"
msgstr ""

#: src/message.h:215
#, c-format
msgid "File %s exists, but %s does not exist."
msgstr ""

#: src/message.h:216
#, c-format
msgid "Invalid payload size for %s, size=%d. It should be %d."
msgstr ""

#: src/message.h:217
#, c-format
msgid "Invalid ID=%d for %s. It should be %d."
msgstr ""

#: src/message.h:218
#, c-format
msgid ""
"Chunk checksum validation failed. checksumIndex=%d, offset=%s, expectedHash=%"
"s, actualHash=%s"
msgstr ""

#: src/message.h:219
msgid "Download aborted."
msgstr ""

#: src/message.h:220
#, c-format
msgid "File %s is being downloaded by other command."
msgstr ""

#: src/message.h:221
msgid "Insufficient checksums."
msgstr ""

#: src/message.h:222
#, c-format
msgid "Tracker returned failure reason: %s"
msgstr ""

#: src/message.h:223
msgid "Flooding detected."
msgstr ""

#: src/message.h:224
#, c-format
msgid ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%d seconds)."
msgstr ""

#: src/message.h:225
msgid "The infoHash in torrent file doesn't match to one in .aria2 file."
msgstr ""

#: src/message.h:226
#, c-format
msgid "No such file entry %s"
msgstr ""

#: src/message.h:227
#, c-format
msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s"
msgstr ""

#: src/message.h:228
msgid "No HttpRequestEntry found."
msgstr ""

#: src/message.h:229
#, c-format
msgid "Got %d status, but no location header provided."
msgstr ""

#: src/message.h:230
#, c-format
msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"
msgstr ""

#: src/message.h:231
msgid "No file matched with your preference."
msgstr ""

#: src/message.h:232
msgid "Exception caught"
msgstr ""

#: src/message.h:233
#, c-format
msgid "Max payload length exceeded or invalid. length = %u"
msgstr ""

#: src/message.h:234
#, c-format
msgid "Invalid file length. Cannot continue download %s: local %s, remote %s"
msgstr ""

#: src/BtSetup.cc:123
msgid "Errors occurred while binding port.\n"
msgstr ""

#: src/Util.cc:713
msgid "Files:"
msgstr ""

#~ msgid ""
#~ " --http-proxy-method=METHOD   Set the method to use in proxy request.\n"
#~ "                              METHOD is either 'get' or 'tunnel'.\n"
#~ "                              Default: tunnel"
#~ msgstr ""
#~ " --http-proxy-method=METODE   Sæt metoden der skal bruges til proxy\n"
#~ "                              forespørgslen. METODE skal enten være 'get' "
#~ "or\n"
#~ "                              'tunnel'. Standard: tunnel"

#~ msgid ""
#~ " --ftp-user=USER              Set FTP user. This affects all URLs.\n"
#~ "                              Default: anonymous"
#~ msgstr ""
#~ " --ftp-user=BRUGER            Sæt FTP bruger. Dette rammer alle URL'er.\n"
#~ "                              Standard: anonymous"

#~ msgid ""
#~ " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs.\n"
#~ "                              Default: ARIA2USER@"
#~ msgstr ""
#~ " --ftp-passwd=KODEORD         Sæt FTP kodeord. Dette rammer alle URL'er.\n"
#~ "                              Standard: ARIA2USER@"

#~ msgid ""
#~ " --ftp-type=TYPE              Set FTP transfer type. TYPE is either "
#~ "'binary'\n"
#~ "                              or 'ascii'.\n"
#~ "                              Default: binary"
#~ msgstr ""
#~ " --ftp-type=TYPE              Sæt FTP overførselstypen. TYPE er enten "
#~ "'binary'\n"
#~ "                              eller 'ascii'.\n"
#~ "                              Standard: binary"

#~ msgid ""
#~ " --ftp-via-http-proxy=METHOD  Use HTTP proxy in FTP. METHOD is either "
#~ "'get' or\n"
#~ "                              'tunnel'.\n"
#~ "                              Default: tunnel"
#~ msgstr ""
#~ " --ftp-via-http-proxy=METODE  Brug HTTP proxy til FTP. METODE er enten "
#~ "'get'\n"
#~ "                              eller 'tunnel'.\n"
#~ "                              Standard: tunnel"