aria2/po/es.po

# Spanish translation for aria2
# Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007
# This file is distributed under the same license as the aria2 package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: aria2\n"
"Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n"
"POT-Creation-Date: 2009-12-05 20:51+0900\n"
"PO-Revision-Date: 2009-04-01 21:33+0900\n"
"Last-Translator: potato <Unknown>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2009-04-01 11:32+0000\n"
"X-Generator: Launchpad (build Unknown)\n"

#: src/DownloadEngine.cc:212
msgid ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."
msgstr ""
"Iniciando secuencia de parada... Pulse Ctrl-C otra vez para efectuar una "
"parada de urgencia."

#: src/DownloadEngine.cc:218
msgid "Emergency shutdown sequence commencing..."
msgstr "Iniciando secuencia de parada de urgencia..."

#: src/MultiUrlRequestInfo.cc:97
msgid "aria2 will resume download if the transfer is restarted."
msgstr "Si reinicia la transferencia, aria2 continuará con la descarga."

#: src/MultiUrlRequestInfo.cc:99
msgid ""
"If there are any errors, then see the log file. See '-l' option in help/man "
"page for details."
msgstr ""
"Compruebe el archivo de registro si se producen errores. Para más "
"información vea la opción '-l' en las páginas help/man."

#: src/RequestGroupMan.cc:543
msgid "Download Results:"
msgstr "Resultados de la descarga:"

#: src/RequestGroupMan.cc:587
msgid "Status Legend:"
msgstr "Leyenda:"

#: src/OptionHandler.cc:38
msgid "                              Default: "
msgstr "                              Predeterminado: "

#: src/OptionHandler.cc:39
msgid "                              Tags: "
msgstr "                              Etiquetas: "

#: src/OptionHandler.cc:40
msgid "                              Possible Values: "
msgstr "                              Valores válidos: "

#: src/OptionHandlerImpl.h:134
msgid "must be either 'true' or 'false'."
msgstr "ha de ser «true» (verdadero) o «false» (falso)"

#: src/OptionHandlerImpl.h:168 src/OptionHandlerImpl.h:217
#, c-format
msgid "must be between %s and %s."
msgstr "ha de estar entre %s y %s."

#: src/OptionHandlerImpl.h:214
#, c-format
msgid "must be smaller than or equal to %s."
msgstr "ha de ser menor o igual que %s."

#: src/OptionHandlerImpl.h:220
#, c-format
msgid "must be greater than or equal to %s."
msgstr "ha de ser mayor o igual que %s."

#: src/OptionHandlerImpl.h:223 src/OptionHandlerImpl.h:301
msgid "must be a number."
msgstr "ha de ser un número."

#: src/OptionHandlerImpl.h:292
#, c-format
msgid "must be smaller than or equal to %.1f."
msgstr "ha de ser menor o igual que %.1f."

#: src/OptionHandlerImpl.h:295
#, c-format
msgid "must be between %.1f and %.1f."
msgstr "ha de estar entre %.1f y %.1f."

#: src/OptionHandlerImpl.h:298
#, c-format
msgid "must be greater than or equal to %.1f."
msgstr "ha de ser mayor o igual que %.1f."

#: src/OptionHandlerImpl.h:476
msgid "must be one of the following:"
msgstr "ha de ser uno de los siguientes:"

#: src/OptionHandlerImpl.h:525 src/OptionHandlerImpl.h:568
msgid "unrecognized proxy format"
msgstr "formato proxy no reconocido"

#: src/usage_text.h:37
msgid ""
" -d, --dir=DIR                The directory to store the downloaded file."
msgstr ""
" -d, --dir=DIR             Directorio donde grabara el archivo descargado."

#: src/usage_text.h:39
msgid " -o, --out=FILE               The file name of the downloaded file."
msgstr " -o, --out=ARCHIVO               El nombre del archivo descargado."

#: src/usage_text.h:41
msgid ""
" -l, --log=LOG                The file name of the log file. If '-' is\n"
"                              specified, log is written to stdout."
msgstr ""
" -l, --log=LOG                El nombre del fichero de anotaciones.. Si se "
"pone '-',\n"
"                              las anotaciones se escriben en stdout."

#: src/usage_text.h:44
msgid ""
" -D, --daemon                 Run as daemon. The current working directory "
"will\n"
"                              be changed to \"/\" and standard input, "
"standard\n"
"                              output and standard error will be redirected "
"to\n"
"                              \"/dev/null\"."
msgstr ""

#: src/usage_text.h:49
msgid ""
" -s, --split=N                Download a file using N connections. If more\n"
"                              than N URLs are given, first N URLs are used "
"and\n"
"                              remaining URLs are used for backup. If less "
"than\n"
"                              N URLs are given, those URLs are used more "
"than\n"
"                              once so that N connections total are made\n"
"                              simultaneously. Please see -j option too.\n"
"                              Please note that in Metalink download, this\n"
"                              option has no effect and use -C option instead."
msgstr ""
" -s, --split=N                Descargar un archivo usando N conexiones. Si\n"
"                              hay más de N URL, se usarán las N primeras "
"para\n"
"                              descargar y el resto como respaldo. Si hay "
"menos \n"
"                              de N, se usarán algunas URL más de una vez "
"para\n"
"                              que haya un total de N conexiones "
"simultáneas. \n"
"                              Vea también la opción -j. Tenga en cuenta "
"que \n"
"                              esta opción no funciona para descargas "
"Metalink, \n"
"                              donde se usa la opción -C en su lugar."

#: src/usage_text.h:58
msgid ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured."
msgstr ""
" --retry-wait=SEG             Establecer los segundos para el siguiente \n"
"                              intento tras un error."

#: src/usage_text.h:61
msgid " -t, --timeout=SEC            Set timeout in seconds."
msgstr ""
" -t, --timeout=SEG            Establecer el tiempo de espera máximo\n"
"                              en segundos."

#: src/usage_text.h:63
msgid " -m, --max-tries=N            Set number of tries. 0 means unlimited."
msgstr ""
" -m, --max-tries=N            Establecer número de intentos. \n"
"                              0 para ilimitados."

#: src/usage_text.h:65
msgid ""
" --http-proxy=PROXY           Use this proxy server for HTTP.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --http-proxy=PROXY           Usar este servidor proxy para HTTP.\n"
"                              Vea también la opción --all-proxy.\n"
"                              Afecta a todas las URL."

#: src/usage_text.h:69
msgid ""
" --https-proxy=PROXY          Use this proxy server for HTTPS.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --https-proxy=PROXY          Usar este servidor proxy para HTTPS.\n"
"                              Vea también la opción --all-proxy.\n"
"                              Afecta a todas las URL."

#: src/usage_text.h:73
msgid ""
" --ftp-proxy=PROXY            Use this proxy server for FTP.\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --ftp-proxy=PROXY            Usar este servidor proxy para FTP.\n"
"                              Vea también la opción --all-proxy.\n"
"                              Afecta a todas las URL."

#: src/usage_text.h:77
msgid ""
" --all-proxy=PROXY            Use this proxy server for all protocols.\n"
"                              You can override this setting and specify a\n"
"                              proxy server for a particular protocol using\n"
"                              --http-proxy, --https-proxy and --ftp-proxy\n"
"                              options.\n"
"                              This affects all URLs."
msgstr ""
" --all-proxy=PROXY            Usar este proxy para todos los protocolos.\n"
"                              Esta opción se puede sobreescribir si se\n"
"                              especifica un servidor proxy para un "
"protocolo\n"
"                              particular usando las opciones --http-proxy, \n"
"                              --https-proxy o --ftp-proxy.\n"
"                              Esto afecta a todas las URL."

#: src/usage_text.h:84
msgid " --http-user=USER             Set HTTP user. This affects all URLs."
msgstr ""
" --http-user=USUARIO        Establecer el usuario HTTP. \n"
"                              Afecta a todas las URL."

#: src/usage_text.h:86
msgid " --http-passwd=PASSWD         Set HTTP password. This affects all URLs."
msgstr ""
" --http-passwd=CONT       Establecer la contraseña HTTP.\n"
"                              Afecta a todas las URL."

#: src/usage_text.h:88
msgid " --proxy-method=METHOD        Set the method to use in proxy request."
msgstr ""

#: src/usage_text.h:90
msgid " --referer=REFERER            Set Referer. This affects all URLs."
msgstr ""
" --referer=REFERER            Establece la referencia. Esto afecta a todas "
"las URLs."

#: src/usage_text.h:92
msgid " --ftp-user=USER              Set FTP user. This affects all URLs."
msgstr ""

#: src/usage_text.h:94
msgid " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs."
msgstr ""

#: src/usage_text.h:96
msgid " --ftp-type=TYPE              Set FTP transfer type."
msgstr ""

#: src/usage_text.h:98
msgid ""
" -p, --ftp-pasv[=true|false]  Use the passive mode in FTP. If false is "
"given,\n"
"                              the active mode will be used."
msgstr ""

#: src/usage_text.h:101
msgid ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads."
msgstr ""

#: src/usage_text.h:107
msgid ""
" --max-overall-download-limit=SPEED Set max overall download speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the download speed per download, use\n"
"                              --max-download-limit option."
msgstr ""

#: src/usage_text.h:113
msgid ""
" --max-download-limit=SPEED   Set max download speed per each download in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall download speed, use\n"
"                              --max-overall-download-limit option."
msgstr ""

#: src/usage_text.h:119
msgid ""
" --file-allocation=METHOD     Specify file allocation method.\n"
"                              'none' doesn't pre-allocate file space. "
"'prealloc'\n"
"                              pre-allocates file space before download "
"begins.\n"
"                              This may take some time depending on the size "
"of\n"
"                              the file.\n"
"                              If you are using newer file systems such as "
"ext4\n"
"                              (with extents support), btrfs or xfs, 'falloc' "
"is\n"
"                              your best choice. It allocates large(few GiB)\n"
"                              files almost instantly. Don't use 'falloc' "
"with\n"
"                              legacy file systems such as ext3 because it "
"takes\n"
"                              almost same time as 'prealloc' and it blocks "
"aria2\n"
"                              entirely until allocation finishes. 'falloc' "
"may\n"
"                              not be available if your system doesn't have\n"
"                              posix_fallocate() function."
msgstr ""

#: src/usage_text.h:134
msgid ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --no-file-allocation-limit=SIZE No se reserva espacio para archivos cuya\n"
"                              medida es más pequeña que SIZE.\n"
"                              Usted puede añadir K o M(1K = 1024, 1M = "
"1024K)."

#: src/usage_text.h:138
msgid ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"
msgstr ""
" --enable-direct-io[=true|false] Acivar E/S directa, que minimiza el uso de "
"CPU cuando\n"
"                               se reserva espacio para los archivos.\n"
"                               Desactivelo si encuentra algún error."

#: src/usage_text.h:142
msgid ""
" --allow-overwrite=true|false If false is given, and a file already exists "
"but\n"
"                              the corresponding control file (filename."
"aria2)\n"
"                              doesn't exist, then aria2 will not re-"
"download\n"
"                              the file. See also --auto-file-renaming option."
msgstr ""

#: src/usage_text.h:147
msgid ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."
msgstr ""

#: src/usage_text.h:152
msgid ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities."
msgstr ""

#: src/usage_text.h:156
msgid ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended."
msgstr ""

#: src/usage_text.h:162
msgid ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required."
msgstr ""

#: src/usage_text.h:173
msgid ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection."
msgstr ""
" --enable-http-keep-alive[=true|false] Habilitar conexiones persistentes "
"HTTP/1.1."

#: src/usage_text.h:175
msgid " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining."
msgstr ""

#: src/usage_text.h:177
msgid ""
" -V, --check-integrity[=true|false] Check file integrity by validating "
"piece\n"
"                              hashes. This option has effect only in "
"BitTorrent\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file. See also --bt-hash-check-seed "
"option."
msgstr ""

#: src/usage_text.h:183
msgid ""
" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n"
"                              --check-integrity option and file is "
"complete,\n"
"                              continue to seed file. If you want to check "
"file\n"
"                              and download it only when it is damaged or\n"
"                              incomplete, set this option to false.\n"
"                              This option has effect only on BitTorrent\n"
"                              download."
msgstr ""

#: src/usage_text.h:191
msgid ""
" --realtime-chunk-checksum=true|false  Validate chunk of data by "
"calculating\n"
"                              checksum while downloading a file if chunk\n"
"                              checksums are provided."
msgstr ""

#: src/usage_text.h:195
msgid ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."
msgstr ""
" -c, --continue               Continua descargando un fichero parcialmente "
"descargado.\n"
"                              Usen esta opción para seguir la descarga\n"
"                              comenzada por un navegador Web o otro "
"programa\n"
"                              que descarga los ficheros secuencialmente "
"desde el\n"
"                              principio. esta opción solamente es\n"
"                              aplicable a descargas http(s)/ftp."

#: src/usage_text.h:202
msgid " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."
msgstr ""
" -U, --user-agent=USER_AGENT   Establece el agente de usuario para descargas "
"http."

#: src/usage_text.h:204
msgid " -n, --no-netrc               Disables netrc support."
msgstr " -n, --no-netrc             Desactiva el soporte netrc."

#: src/usage_text.h:206
msgid ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when '-' is specified.\n"
"                              The additional out and dir options can be\n"
"                              specified after each line of URIs. This "
"optional\n"
"                              line must start with white space(s). See "
"INPUT\n"
"                              FILE section of man page for details."
msgstr ""

#: src/usage_text.h:215
msgid ""
" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads "
"for\n"
"                              every static (HTTP/FTP) URL, torrent and "
"metalink.\n"
"                              See also -s and -C options."
msgstr ""

#: src/usage_text.h:219
msgid ""
" --load-cookies=FILE          Load Cookies from FILE using the Firefox3 "
"format\n"
"                              and Mozilla/Firefox(1.x/2.x)/Netscape format."
msgstr ""

#: src/usage_text.h:222
msgid ""
" --save-cookies=FILE          Save Cookies to FILE in Mozilla/Firefox(1.x/2."
"x)/\n"
"                              Netscape format. If FILE already exists, it "
"is\n"
"                              overwritten. Session Cookies are also saved "
"and\n"
"                              their expiry values are treated as 0."
msgstr ""

#: src/usage_text.h:227
msgid ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."
msgstr ""
" -S, --show-files             Escribe el listado de ficheros de un fichero ."
"torrent o .metalink\n"
"                              y sale. Se listará información más detallada\n"
"                              en el caso de un fichero torrent."

#: src/usage_text.h:231
msgid ""
" --select-file=INDEX...       Set file to download by specifying its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: \"3,6\".\n"
"                              You can also use '-' to specify a range: \"1-5"
"\".\n"
"                              ',' and '-' can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."
msgstr ""

#: src/usage_text.h:240
msgid " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."
msgstr " -T, --torrent-file=TORRENT_FILE  El camino al fichero .torrent."

#: src/usage_text.h:242
msgid ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:252
msgid ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file."
msgstr ""

#: src/usage_text.h:255
msgid ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""
" --listen-port=PORT... Fija el puerto TCP para las dercargas bittorrent\n"
"Multiples puertos pueden ser especificados separando  por ','\n"
"por ejemplo \"6881,6885\". Tambien puede usar '-'\n"
"para especificar un rango de puertos: \"6881-6999\" ',' y '-'  pueden \n"
"ser usados juntos."

#: src/usage_text.h:261
msgid ""
" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the upload speed per torrent, use\n"
"                              --max-upload-limit option."
msgstr ""

#: src/usage_text.h:267
msgid ""
" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall upload speed, use\n"
"                              --max-overall-upload-limit option."
msgstr ""

#: src/usage_text.h:273
msgid ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."
msgstr ""
" --seed-time=MINUTES          Especifica el tiempo de sembrar en minuts. "
"Mirar también\n"
"                              la opción --seed-ratio."

#: src/usage_text.h:276
msgid ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO.\n"
"                              You are strongly encouraged to specify equals "
"or\n"
"                              more than 1.0 here. Specify 0.0 if you intend "
"to\n"
"                              do seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."
msgstr ""

#: src/usage_text.h:285
msgid ""
" --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20 bytes are\n"
"                              used. If less than 20 bytes are specified, "
"random\n"
"                              byte data are added to make its length 20 "
"bytes."
msgstr ""

#: src/usage_text.h:291
msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."
msgstr ""

#: src/usage_text.h:293
msgid " --enable-dht[=true|false]    Enable DHT functionality."
msgstr " --enable-dht[=true|false]    Habilitar funcionanlidad DHT."

#: src/usage_text.h:295
msgid ""
" --dht-listen-port=PORT...    Set UDP listening port for DHT.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""

#: src/usage_text.h:301
msgid ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to DHT\n"
"                              network."
msgstr ""

#: src/usage_text.h:304
msgid ""
" --dht-file-path=PATH         Change the DHT routing table file to PATH."
msgstr ""

#: src/usage_text.h:306
msgid ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses the lowest one which "
"satisfies\n"
"                              the given level."
msgstr ""

#: src/usage_text.h:311
msgid ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."
msgstr ""

#: src/usage_text.h:316
msgid ""
" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n"
"                              torrent is lower than SPEED, aria2 "
"temporarily\n"
"                              increases the number of peers to try for more\n"
"                              download speed. Configuring this option with "
"your\n"
"                              preferred download speed can increase your\n"
"                              download speed in some cases.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""

#: src/usage_text.h:324
msgid ""
" --bt-max-open-files=NUM      Specify maximum number of files to open in "
"each\n"
"                              BitTorrent download."
msgstr ""
" --bt-max-open-files=NUM      Especifica el numero maximo de archivos a "
"abrir en cada \n"
"descarga Bittorrent."

#: src/usage_text.h:327
msgid ""
" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"
"                              verifying piece hashes."
msgstr ""

#: src/usage_text.h:330
msgid ""
" --bt-max-peers=NUM           Specify the maximum number of peers per "
"torrent.\n"
"                              0 means unlimited.\n"
"                              See also --bt-request-peer-speed-limit option."
msgstr ""

#: src/usage_text.h:334
msgid " -M, --metalink-file=METALINK_FILE The file path to the .metalink file."
msgstr " -M, --metalink-file=METALINK_FILE El camino al fichero .metalink."

#: src/usage_text.h:336
msgid ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously. Some Metalinks regulate the\n"
"                              number of servers to connect. aria2 strictly\n"
"                              respects them. This means that if Metalink "
"defines\n"
"                              the maxconnections attribute lower than\n"
"                              NUM_SERVERS, then aria2 uses the value of\n"
"                              maxconnections attribute instead of "
"NUM_SERVERS.\n"
"                              See also -s and -j options."
msgstr ""

#: src/usage_text.h:345
msgid " --metalink-version=VERSION   The version of the file to download."
msgstr " --metalink-version=VERSION   La versión del fichero a descargar."

#: src/usage_text.h:347
msgid " --metalink-language=LANGUAGE The language of the file to download."
msgstr " --metalink-language=LANGUAGE El idioma del fichero a descargar."

#: src/usage_text.h:349
msgid ""
" --metalink-os=OS             The operating system of the file to download."
msgstr ""
" --metalink-os=OS            El Sistema Operativo del fichero a descargar."

#: src/usage_text.h:351
msgid ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-delimited list of locations is\n"
"                              acceptable."
msgstr ""

#: src/usage_text.h:355
msgid ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify "
"'none'\n"
"                              if you don't have any preferred protocol."
msgstr ""

#: src/usage_text.h:358
msgid ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metalink or content type of\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:368
msgid ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."
msgstr ""

#: src/usage_text.h:374
msgid " -v, --version                Print the version number and exit."
msgstr " -v, --version                Escribir el número de versión y salir."

#: src/usage_text.h:376
msgid ""
" -h, --help[=TAG|KEYWORD]     Print usage and exit.\n"
"                              The help messages are classified with tags. A "
"tag\n"
"                              starts with \"#\". For example, type \"--"
"help=#http\"\n"
"                              to get the usage for the options tagged with\n"
"                              \"#http\". If non-tag word is given, print the "
"usage\n"
"                              for the options whose name includes that word."
msgstr ""

#: src/usage_text.h:383
msgid " --no-conf                    Disable loading aria2.conf file."
msgstr ""

#: src/usage_text.h:385
msgid ""
" --conf-path=PATH             Change the configuration file path to PATH."
msgstr ""

#: src/usage_text.h:387
msgid ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."
msgstr ""

#: src/usage_text.h:390
msgid ""
" --header=HEADER              Append HEADER to HTTP request header. You can "
"use\n"
"                              this option repeatedly to specify more than "
"one\n"
"                              header:\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"
msgstr ""

#: src/usage_text.h:396
msgid " -q, --quiet[=true|false]     Make aria2 quiet(no console output)."
msgstr ""

#: src/usage_text.h:398
msgid " --async-dns[=true|false]     Enable asynchronous DNS."
msgstr ""

#: src/usage_text.h:400
msgid " --ftp-reuse-connection[=true|false] Reuse connection in FTP."
msgstr ""

#: src/usage_text.h:402
msgid ""
" --summary-interval=SEC       Set interval to output download progress "
"summary.\n"
"                              Setting 0 suppresses the output."
msgstr ""

#: src/usage_text.h:405
msgid " --log-level=LEVEL            Set log level to output."
msgstr ""

#: src/usage_text.h:407
msgid ""
" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from "
"the\n"
"                              remote HTTP/FTP server and if it is "
"available,\n"
"                              apply it to the local file."
msgstr ""

#: src/usage_text.h:411
msgid ""
" --connect-timeout=SEC        Set the connect timeout in seconds to "
"establish\n"
"                              connection to HTTP/FTP/proxy server. After "
"the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --timeout option is used instead."
msgstr ""

#: src/usage_text.h:416
msgid ""
" --max-file-not-found=NUM     If aria2 receives `file not found' status from "
"the\n"
"                              remote HTTP/FTP servers NUM times without "
"getting\n"
"                              a single byte, then force the download to "
"fail.\n"
"                              Specify 0 to disable this option.\n"
"                              This options is effective only when using\n"
"                              HTTP/FTP servers."
msgstr ""

#: src/usage_text.h:423
msgid ""
" --uri-selector=SELECTOR      Specify URI selection algorithm.\n"
"                              If 'inorder' is given, URI is tried in the "
"order\n"
"                              appeared in the URI list.\n"
"                              If 'feedback' is given, aria2 uses download "
"speed\n"
"                              observed in the previous downloads and choose\n"
"                              fastest server in the URI list. This also\n"
"                              effectively skips dead mirrors. The observed\n"
"                              download speed is a part of performance "
"profile\n"
"                              of servers mentioned in --server-stat-of and\n"
"                              --server-stat-if options.\n"
"                              If 'adaptive' is given, selects one of the "
"best\n"
"                              mirrors for the first and reserved "
"connections.\n"
"                              For supplementary ones, it returns mirrors "
"which\n"
"                              has not been tested yet, and if each of them "
"has\n"
"                              already been tested, returns mirrors which has "
"to\n"
"                              be tested again. Otherwise, it doesn't select\n"
"                              anymore mirrors. Like 'feedback', it uses a\n"
"                              performance profile of servers."
msgstr ""

#: src/usage_text.h:442
msgid ""
" --server-stat-of=FILE        Specify the filename to which performance "
"profile\n"
"                              of the servers is saved. You can load saved "
"data\n"
"                              using --server-stat-if option."
msgstr ""

#: src/usage_text.h:446
msgid ""
" --server-stat-if=FILE        Specify the filename to load performance "
"profile\n"
"                              of the servers. The loaded data will be used "
"in\n"
"                              some URI selector such as 'feedback'.\n"
"                              See also --uri-selector option"
msgstr ""

#: src/usage_text.h:451
msgid ""
" --server-stat-timeout=SEC    Specifies timeout in seconds to invalidate\n"
"                              performance profile of the servers since the "
"last\n"
"                              contact to them."
msgstr ""

#: src/usage_text.h:455
msgid ""
" --auto-save-interval=SEC     Save a control file(*.aria2) every SEC "
"seconds.\n"
"                              If 0 is given, a control file is not saved "
"during\n"
"                              download. aria2 saves a control file when it "
"stops\n"
"                              regardless of the value."
msgstr ""

#: src/usage_text.h:460
msgid ""
" --certificate=FILE           Use the client certificate in FILE.\n"
"                              The certificate must be in PEM format.\n"
"                              You may use --private-key option to specify "
"the\n"
"                              private key."
msgstr ""

#: src/usage_text.h:465
msgid ""
" --private-key=FILE           Use the private key in FILE.\n"
"                              The private key must be decrypted and in PEM\n"
"                              format. See also --certificate option."
msgstr ""

#: src/usage_text.h:469
msgid ""
" --ca-certificate=FILE        Use the certificate authorities in FILE to "
"verify\n"
"                              the peers. The certificate file must be in "
"PEM\n"
"                              format and can contain multiple CA "
"certificates.\n"
"                              Use --check-certificate option to enable\n"
"                              verification."
msgstr ""

#: src/usage_text.h:475
msgid ""
" --check-certificate[=true|false] Verify the peer using certificates "
"specified\n"
"                              in --ca-certificate option."
msgstr ""

#: src/usage_text.h:478
msgid ""
" --no-proxy=DOMAINS           Specify comma separated hostnames or domains "
"where\n"
"                              proxy should not be used."
msgstr ""

#: src/usage_text.h:481
msgid ""
" --use-head[=true|false]      Use HEAD method for the first request to the "
"HTTP\n"
"                              server."
msgstr ""

#: src/usage_text.h:484
msgid " --event-poll=POLL            Specify the method for polling events."
msgstr ""

#: src/usage_text.h:486
#, fuzzy
msgid ""
" --xml-rpc-listen-port=PORT   Specify a port number for XML-RPC server to "
"listen\n"
"                              to."
msgstr ""
" --bt-max-open-files=NUM      Especifica el numero maximo de archivos a "
"abrir en cada \n"
"descarga Bittorrent."

#: src/usage_text.h:489
msgid ""
" --enable-xml-rpc[=true|false] Enable XML-RPC server.\n"
"                              It is strongly recommended to set username "
"and\n"
"                              password using --xml-rpc-user and --xml-rpc-"
"passwd\n"
"                              option. See also --xml-rpc-listen-port option."
msgstr ""

#: src/usage_text.h:494
msgid ""
" --xml-rpc-max-request-size=SIZE Set max size of XML-RPC request. If aria2\n"
"                              detects the request is more than SIZE bytes, "
"it\n"
"                              drops connection."
msgstr ""

#: src/usage_text.h:498
#, fuzzy
msgid " --xml-rpc-user=USER          Set XML-RPC user."
msgstr ""
" --http-user=USUARIO        Establecer el usuario HTTP. \n"
"                              Afecta a todas las URL."

#: src/usage_text.h:500
#, fuzzy
msgid " --xml-rpc-passwd=PASSWD      Set XML-RPC password."
msgstr ""
" --http-passwd=CONT       Establecer la contraseña HTTP.\n"
"                              Afecta a todas las URL."

#: src/usage_text.h:502
msgid ""
" --bt-external-ip=IPADDRESS   Specify the external IP address to report to "
"a\n"
"                              BitTorrent tracker. Although this function is\n"
"                              named 'external', it can accept any kind of "
"IP\n"
"                              addresses."
msgstr ""

#: src/usage_text.h:507
msgid ""
" --http-auth-challenge[=true|false] Send HTTP authorization header only when "
"it\n"
"                              is requested by the server. If false is set, "
"then\n"
"                              authorization header is always sent to the "
"server.\n"
"                              There is an exception: if username and "
"password\n"
"                              are embedded in URI, authorization header is\n"
"                              always sent to the server regardless of this\n"
"                              option."
msgstr ""

#: src/usage_text.h:515
msgid ""
" -O, --index-out=INDEX=PATH   Set file path for file with index=INDEX. You "
"can\n"
"                              find the file index using the --show-files "
"option.\n"
"                              PATH is a relative path to the path specified "
"in\n"
"                              --dir option. You can use this option "
"multiple\n"
"                              times."
msgstr ""

#: src/usage_text.h:521
msgid ""
" --dry-run[=true|false]       If true is given, aria2 just checks whether "
"the\n"
"                              remote file is available and doesn't download\n"
"                              data. This option has effect on HTTP/FTP "
"download.\n"
"                              BitTorrent downloads are canceled if true is\n"
"                              specified."
msgstr ""

#: src/usage_text.h:527
msgid ""
" --bt-tracker-interval=SEC    Set the interval in seconds between tracker\n"
"                              requests. This completely overrides interval "
"value\n"
"                              and aria2 just uses this value and ignores "
"the\n"
"                              min interval and interval value in the "
"response of\n"
"                              tracker. If 0 is set, aria2 determines "
"interval\n"
"                              based on the response of tracker and the "
"download\n"
"                              progress."
msgstr ""

#: src/usage_text.h:535
msgid ""
" --on-download-complete=COMMAND Set the command to be executed when "
"download\n"
"                              completes.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""

#: src/usage_text.h:541
msgid ""
" --on-download-start=COMMAND  Set the command to be executed when download\n"
"                              starts up. COMMAND must take just one argument "
"and\n"
"                              GID is passed to COMMAND as a first argument."
msgstr ""

#: src/usage_text.h:545
msgid ""
" --on-download-error=COMMAND  Set the command to be executed when download\n"
"                              aborts due to error.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""

#: src/usage_text.h:551
msgid ""
" --on-download-stop=COMMAND   Set the command to be executed when download\n"
"                              stops. You can override the command to be "
"executed\n"
"                              for particular download result using\n"
"                              --on-download-complete and --on-download-"
"error. If\n"
"                              they are specified, command specified in this\n"
"                              option is not executed.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""

#: src/usage_text.h:560
msgid ""
" --bt-stop-timeout=SEC        Stop BitTorrent download if download speed is "
"0 in\n"
"                              consecutive SEC seconds. If 0 is given, this\n"
"                              feature is disabled."
msgstr ""

#: src/usage_text.h:564
msgid ""
" --xml-rpc-listen-all[=true|false] Listen incoming XML-RPC requests on all\n"
"                              network interfaces. If false is given, listen "
"only\n"
"                              on local loopback interface."
msgstr ""

#: src/usage_text.h:568
msgid ""
" --bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and "
"last\n"
"                              pieces of each file first. This is useful for\n"
"                              previewing files. The argument can contain 2\n"
"                              keywords:head and tail. To include both "
"keywords,\n"
"                              they must be separated by comma. These "
"keywords\n"
"                              can take one parameter, SIZE. For example, if\n"
"                              head=SIZE is specified, pieces in the range "
"of\n"
"                              first SIZE bytes of each file get higher "
"priority.\n"
"                              tail=SIZE means the range of last SIZE bytes "
"of\n"
"                              each file. SIZE can include K or M(1K = 1024, "
"1M =\n"
"                              1024K)."
msgstr ""

#: src/usage_text.h:580
msgid ""
" --interface=INTERFACE        Bind sockets to given interface. You can "
"specify\n"
"                              interface name, IP address and hostname."
msgstr ""

#: src/usage_text.h:583
msgid " --disable-ipv6[=true|false]  Disable IPv6."
msgstr ""

#: src/version_usage.cc:57
msgid " version "
msgstr " versión "

#: src/version_usage.cc:80
#, c-format
msgid "Report bugs to %s"
msgstr "Informar de errores a %s"

#: src/version_usage.cc:85
msgid "Usage: aria2c [OPTIONS] [URL | TORRENT_FILE | METALINK_FILE]..."
msgstr ""

#: src/version_usage.cc:92
msgid "Printing all options."
msgstr ""

#: src/version_usage.cc:94
#, c-format
msgid "Printing options tagged with '%s'."
msgstr ""

#: src/version_usage.cc:98
#, c-format
msgid "See -h option to know other command-line options(%s)."
msgstr ""

#: src/version_usage.cc:103 src/version_usage.cc:115
msgid "Options:"
msgstr "Opciones:"

#: src/version_usage.cc:112
#, c-format
msgid "Printing options whose name includes '%s'."
msgstr ""

#: src/version_usage.cc:120
#, c-format
msgid "No option matching with '%s'."
msgstr ""

#: src/version_usage.cc:128
msgid ""
" You can specify multiple URLs. Unless you specify -Z option, all URLs must\n"
" point to the same file or downloading will fail."
msgstr ""
" Se pueden poner varias URLs. A menos que se especifique la opción -Z, todas "
"las URLs han\n"
" de apuntar al mismo fichero o la descarga fallará."

#: src/version_usage.cc:130
msgid ""
" You can also specify arbitrary number of torrent files and metalink files\n"
" stored in a local drive. Please note that they are always treated as a\n"
" separate download."
msgstr ""

#: src/version_usage.cc:135
#, fuzzy
msgid ""
" You can specify both torrent file with -T option and URLs. By doing this,\n"
" download a file from both torrent swarm and http/ftp server at the same "
"time,\n"
" while the data from http/ftp are uploaded to the torrent swarm. For single "
"file\n"
" torrents, URL can be a complete URL pointing to the resource or if URL "
"ends\n"
" with '/', 'name' in torrent file is added. For multi-file torrents, 'name' "
"and\n"
" 'path' in torrent are added to form a URL for each file."
msgstr ""
" Se puede poner tanto un fichero torrent con la opción -T y URLs. Así,\n"
" descargamos un fichero desde el enjambre Torrent y el servidor http/ftp al "
"mismo tiempo,\n"
" mientras las datos provinentes de http/ftp son subidos al enjambre torrent. "
"Observen que\n"
" solamente se puede integrar un único fichero con http/ftp."

#: src/version_usage.cc:142
msgid ""
" Make sure that URL is quoted with single(') or double(\") quotation if it\n"
" contains \"&\" or any characters that have special meaning in shell."
msgstr ""

#: src/version_usage.cc:146
msgid "Refer to man page for more information."
msgstr "Para más información consulte la página man."

#: src/message.h:40
#, c-format
msgid "CUID#%d - The download for one segment completed successfully."
msgstr ""
"CUID#%d - Se ha completado satisfactoriamente la descarga de un segmento."

#: src/message.h:41
#, c-format
msgid "CUID#%d - No segment available."
msgstr "CUID#%d - No hay segmentos disponibles."

#: src/message.h:42
#, c-format
msgid "CUID#%d - Connecting to %s:%d"
msgstr "CUID#%d - Conectando a %s:%d"

#: src/message.h:43
#, c-format
msgid ""
"CUID#%d - The segment changed. We send the request again with new Range "
"header."
msgstr ""
"CUID#%d - El segmento ha cambiado. Enviaremos la petición otra vez con una "
"nueva cabecera de intervalo."

#: src/message.h:44
#, c-format
msgid "CUID#%d - Redirecting to %s"
msgstr "CUID#%d - Redirigiendo hacia %s"

#: src/message.h:45
#, c-format
msgid ""
"CUID#%d - Requesting:\n"
"%s"
msgstr ""
"CUID#%d - Pidiendo:\n"
"%s"

#: src/message.h:46
#, c-format
msgid ""
"CUID#%d - Response received:\n"
"%s"
msgstr ""
"CUID#%d - Respuesta recibida:\n"
"%s"

#: src/message.h:47
#, c-format
msgid "CUID#%d - Download aborted. URI=%s"
msgstr "CUID#%d - Descarga cancelada. URI=%s"

#: src/message.h:48
#, c-format
msgid "CUID#%d - Restarting the download. URI=%s"
msgstr "CUID#%d - Re-arrancando la descarga. URI=%s"

#: src/message.h:49
#, c-format
msgid "CUID#%d - Download aborted."
msgstr "CUID#%d - Descarga cancelada."

#: src/message.h:50
#, c-format
msgid "CUID#%d - %d times attempted, but no success. Download aborted."
msgstr "CUID#%d - Intentado %d veces, pero sin éxito. Descarga cancelada."

#: src/message.h:56
#, c-format
msgid "CUID#%d - we got new piece. index=%d"
msgstr "CUID#%d - tenemos una nueva pieza. índice=%d"

#: src/message.h:57
#, c-format
msgid "CUID#%d - we got wrong piece. index=%d"
msgstr "CUID#%d - hemos cogido una pieza mala. índice=%d"

#: src/message.h:58
#, c-format
msgid "CUID#%d - Download not complete: %s"
msgstr "CUID#%d - Descarga incompleta: %s"

#: src/message.h:59
#, c-format
msgid "#%d - Download has already completed: %s"
msgstr "#%d - Ya se ha completado la descarga: %s"

#: src/message.h:60
#, c-format
msgid "CUID#%d - Good checksum: %s"
msgstr "CUID#%d - Suma de comprobación correcta: %s"

#: src/message.h:61
#, c-format
msgid "CUID#%d - Bad checksum: %s"
msgstr "CUID#%d - Suma de comprobación incorrecta: %s"

#: src/message.h:62
#, c-format
msgid "CUID#%d - Resolving hostname %s"
msgstr "CUID#%d - Resolviendo nombre del host %s"

#: src/message.h:63
#, c-format
msgid "CUID#%d - Name resolution complete: %s -> %s"
msgstr "CUID#%d - Resolución del nombre completada: %s -> %s"

#: src/message.h:64
#, c-format
msgid "CUID#%d - Name resolution for %s failed:%s"
msgstr "CUID#%d - La resolución del nombre para %s ha fallado:%s"

#: src/message.h:65
#, c-format
msgid "CUID#%d - DNS cache hit: %s -> %s"
msgstr "CUID#%d - Acertado el caché DNS: %s -> %s"

#: src/message.h:66
#, c-format
msgid "CUID#%d - Abort requested."
msgstr "CUID#%d - Cancelación requerida."

#: src/message.h:67
#, c-format
msgid "CUID#%d - Connecting to the peer %s"
msgstr "CUID#%d - Conectando al igual %s"

#: src/message.h:68
#, c-format
msgid ""
"CUID#%d - Piece received. index=%d, begin=%d, length=%d, offset=%llu, "
"blockIndex=%d"
msgstr ""
"CUID#%d - pieza recibida. índice=%d, inicio=%d, longitud=%d, desviación=%"
"llu, Indice-bloque=%d"

#: src/message.h:69
#, c-format
msgid "CUID#%d - Piece bitfield %s"
msgstr "CUID#%d - Campo de bits de la pieza %s"

#: src/message.h:70
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because the peer has been choked. "
"index=%d, begin=%d, length=%d"
msgstr ""
"CUID#%d - Mensaje de rechazo de la pieza en cola debido a que el igual ha "
"estado estrangulado. índice=%d, inicio=%d, longitud=%d"

#: src/message.h:71
#, c-format
msgid ""
"CUID#%d - Reject piece message in queue because cancel message received. "
"index=%d, begin=%d, length=%d"
msgstr ""
"CUID#%d - Mensaje de rechazo de la pieza en cola debido a que se ha recibido "
"un mensaje de cancelación. índice=%d, inicio=%d, longitud=%d"

#: src/message.h:72
#, c-format
msgid "CUID#%d - Exception caught while validating file integrity."
msgstr ""
"CUID#%d - Hemos encontrado una excepción mientras validábamos la integridad "
"del fichero."

#: src/message.h:73
#, c-format
msgid "CUID#%d - Interested in the peer"
msgstr "CUID#%d - Interesado en el igual"

#: src/message.h:74
#, c-format
msgid "CUID#%d - Not interested in the peer"
msgstr "CUID#%d - No interesado en el igual"

#: src/message.h:75
#, c-format
msgid "CUID#%d - Deleting request slot index=%d, blockIndex=%d"
msgstr "CUID#%d - Borrando petición en el eslot. índice=%d, índice-bloque=%d"

#: src/message.h:76
#, c-format
msgid ""
"CUID#%d - Deleting request slot index=%d, blockIndex=%d because localhost "
"got choked."
msgstr ""
"CUID#%d - Borrando petición en el eslot. índice=%d, bloque-índice=%d debido "
"a que el localhost ha estado estrangulado."

#: src/message.h:77
#, c-format
msgid "CUID#%d - Deleting request slot blockIndex=%d because of time out"
msgstr ""
"CUID#%d - Borrando petición en el eslot. bloque-índice=%d debido a tiempo "
"excedido"

#: src/message.h:78
#, c-format
msgid ""
"CUID#%d - Deleting request slot blockIndex=%d because the block has been "
"acquired."
msgstr ""
"CUID#%d - Borrando petición en el eslot. bloque-índice=%d debido a que el "
"bloque ha sido recibido."

#: src/message.h:79
#, c-format
msgid "CUID#%d - Fast extension enabled."
msgstr "CUID#%d - Extensión ràpida activada."

#: src/message.h:80
#, c-format
msgid "CUID#%d - Extended Messaging enabled."
msgstr "CUID#%d - Mensajes extendidos activados."

#: src/message.h:81
#, c-format
msgid "CUID#%d - Exception caught while allocating file space."
msgstr ""
"CUID#%d - Hemos encontrado una excepción mientras reservábamos espacio para "
"el fichero."

#: src/message.h:82
#, c-format
msgid "CUID#%d - Content-Disposition detected. Use %s as filename"
msgstr ""
"CUID#%d - Hemos detectado Content-Disposition. Usaremos %s como nombre de "
"fichero"

#: src/message.h:83
#, c-format
msgid "CUID#%d - Peer %s:%d banned."
msgstr "CUID#%d - Igual %s:%d vetado."

#: src/message.h:84
#, c-format
msgid "CUID#%d - Using port %d for accepting new connections"
msgstr "CUID#%d - Usamos el puerto %d para aceptar nuevas conexiones"

#: src/message.h:85
#, c-format
msgid "CUID#%d - An error occurred while binding port=%d"
msgstr "CUID#%d - Ha ocurrido un error mientras tomábamos el puerto=%d"

#: src/message.h:86
#, c-format
msgid "CUID#%d - Incoming connection, adding new command CUID#%d"
msgstr "CUID#%d - Conexión entrante, añadiendo nueva orden CUID#%d"

#: src/message.h:87
#, c-format
msgid "CUID#%d - Error in accepting connection"
msgstr "CUID#%d - Error acceptando conexión"

#: src/message.h:88
#, c-format
msgid "CUID#%d - Error occurred while processing tracker response."
msgstr ""
"CUID#%d - Ha ocurrido un error mientras procesábamos la respuesta del "
"seguidor."

#: src/message.h:89
#, c-format
msgid "CUID#%d - Cannot create tracker request."
msgstr "CUID#%d - No se puede crear la petición en el seguidor."

#: src/message.h:90
#, c-format
msgid "CUID#%d - Creating new tracker request command #%d"
msgstr "CUID#%d - Creando una nueva orden de petición al seguidor #%d"

#: src/message.h:91
#, c-format
msgid "CUID#%d - The peer is DHT-enabled."
msgstr ""

#: src/message.h:95
#, c-format
msgid "Unrecognized URI or unsupported protocol: %s"
msgstr "URI no reconocida o protocolo no soportado: %s"

#: src/message.h:96
#, c-format
msgid "Tracker returned warning message: %s"
msgstr "El seguidor ha devuelto un mensaje de aviso: %s"

#: src/message.h:97
#, c-format
msgid "The segment file %s exists."
msgstr "El fichero de segmentos %s existe."

#: src/message.h:98
#, c-format
msgid "The segment file %s does not exist."
msgstr "El fichero de segmentos %s no existe."

#: src/message.h:99
#, c-format
msgid "Saving the segment file %s"
msgstr "Guardando el fichero de segmentos %s"

#: src/message.h:100
msgid "The segment file was saved successfully."
msgstr "El fichero de segmentos se ha guardado satisfactoriamente."

#: src/message.h:101
#, c-format
msgid "Loading the segment file %s."
msgstr "Cargando el fichero de segmentos %s."

#: src/message.h:102
msgid "The segment file was loaded successfully."
msgstr "Se ha cargado satisfactoriamente el fichero de segmentos."

#: src/message.h:103
msgid "No URI to download. Download aborted."
msgstr "No hay URI para descargar. descarga cancelada."

#: src/message.h:104
#, c-format
msgid ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."
msgstr ""
"El archivo %s existe, pero un archivo de control (*.aria2) no existe. La "
"descarga ha sido canceleda para prevenir que su archivo sea truncado a 0. Si "
"usted está seguro de que debe descargar el archivo de todas formas, entonces "
"bórrelo o añada la opción --allow-overwrite=true y reinicie aria2."

#: src/message.h:105
#, c-format
msgid "Allocating file %s, %s bytes"
msgstr "Reservando fichero %s, %s bytes"

#: src/message.h:106
msgid "File not found"
msgstr "No se ha encontrado el fichero"

#: src/message.h:107
msgid "Not a directory"
msgstr "No es un directorio"

#: src/message.h:108
#, c-format
msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d"
msgstr ""
"No hay bastantes sumas de comprobación. Longitud suma comprobación=%d, "
"Número sumas comprobación=%d"

#: src/message.h:109
#, c-format
msgid "Writing file %s"
msgstr "Escribiendo fichero %s"

#: src/message.h:110
msgid "No peer list received."
msgstr "No hemos recibido la lista de iguales."

#: src/message.h:111
#, c-format
msgid "Adding peer %s:%d"
msgstr "Añadiendo igual %s:%d"

#: src/message.h:112
#, c-format
msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d"
msgstr "Borrando pieza usada índice=%d, ratioLlenar(%%)=%d<=%d"

#: src/message.h:113
msgid "Download of selected files was complete."
msgstr "Se ha completado la descarga de los ficheros seleccionados."

#: src/message.h:114
msgid "The download was complete."
msgstr "Se ha completado la descarga."

#: src/message.h:115
#, c-format
msgid "Removed %d have entries."
msgstr "Borrado %d tiene entradas."

#: src/message.h:116
#, c-format
msgid "Validating file %s"
msgstr "Validando fichero %s"

#: src/message.h:117
#, c-format
msgid "%d seconds to allocate %s byte(s)"
msgstr "%d segundos para reservar %s byte(s)"

#: src/message.h:118
#, c-format
msgid "Dispatching FileAllocationCommand for CUID#%d."
msgstr "Ejecutando Orden de Reservar Fichero para CUID#%d."

#: src/message.h:119
#, c-format
msgid "Metalink: Queueing %s for download."
msgstr "Metalink: Poniendo en cola %s para descarga."

#: src/message.h:120
#, c-format
msgid "Download complete: %s"
msgstr "Descarga completa: %s"

#: src/message.h:121
msgid "Seeding is over."
msgstr "Se ha acabado de sembrar."

#: src/message.h:122
#, c-format
msgid "CUID#%d cancels segment index=%d. CUID#%d handles it instead."
msgstr "CUID#%d cancela el segmento índice=%d. El CUID#%d lo gestionará ahora."

#: src/message.h:123
msgid "No chunk to verify."
msgstr "No hay ningún trozo para verificar."

#: src/message.h:124
#, c-format
msgid "Good chunk checksum. hash=%s"
msgstr "Suma de comprobación del trozo correcta. hash=%s"

#: src/message.h:125
#, c-format
msgid "Failed to load cookies from %s"
msgstr "Fallo al cargar cookies desde %s"

#: src/message.h:126
#, c-format
msgid ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."
msgstr ""
"El fichero .netrc %s no tiene permisos correctos. Ha de ser 600. soporte "
"netrc desactivado."

#: src/message.h:127
msgid "Logging started."
msgstr "Anotación arrancada."

#: src/message.h:128
msgid "Specify at least one URL."
msgstr "Especifique al menos una URL."

#: src/message.h:129
msgid "daemon failed."
msgstr "Ha fallado el daemon."

#: src/message.h:130
#, c-format
msgid "Verification finished successfully. file=%s"
msgstr "La verificación ha acabado satisfactoriamente. fichero=%s"

#: src/message.h:131
#, c-format
msgid "Checksum error detected. file=%s"
msgstr "Se ha detectado un error en la suma de comprobación. fichero=%s"

#: src/message.h:132
#, c-format
msgid "Incomplete range specified. %s"
msgstr "Se ha especificado un intervalo incompleto. %s"

#: src/message.h:133
#, c-format
msgid "Failed to convert string into value: %s"
msgstr "No se pueden convertir los carácteres en un valor: %s"

#: src/message.h:134
msgid "Resource not found"
msgstr "Recurso no encontrado"

#: src/message.h:135
#, c-format
msgid "File already exists. Renamed to %s."
msgstr "El archivo ya exixte. Renombrado a %s."

#: src/message.h:136
msgid "Cannot parse metalink XML file. XML may be malformed."
msgstr ""
"No se puede interpretar el archivo metalink XML. puede ser XML erróneo."

#: src/message.h:137
#, c-format
msgid "Too small payload size for %s, size=%d."
msgstr ""

#: src/message.h:138
#, c-format
msgid ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."
msgstr ""

#: src/message.h:139
#, c-format
msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"
msgstr "Su cociente  compartido fue  %.1f,  Subido/Descargado = %sB/%sB"

#: src/message.h:140
#, c-format
msgid "Missing %s in torrent metainfo."
msgstr "Falta %s en la metainfo  del  torrent"

#: src/message.h:141
msgid "Tracker returned null data."
msgstr "Tracker retorna datos nulos"

#: src/message.h:142
msgid "Windows socket library initialization failed"
msgstr "La libreria de Windows socket fallo en la inicializacion"

#: src/message.h:143
#, c-format
msgid "%d second(s) has passed. Stopping application."
msgstr "pasaron %d segundos. Deteniendo la aplicacion."

#: src/message.h:144
#, c-format
msgid ""
"Saved signature as %s. Please note that aria2 doesn't verify signatures."
msgstr ""

#: src/message.h:146
#, c-format
msgid "Saving signature as %s failed. Maybe file already exists."
msgstr ""

#: src/message.h:149
#, c-format
msgid "Failed to open ServerStat file %s for read."
msgstr ""

#: src/message.h:150
#, c-format
msgid "ServerStat file %s loaded successfully."
msgstr ""

#: src/message.h:151
#, c-format
msgid "Failed to read ServerStat from %s."
msgstr ""

#: src/message.h:154
#, c-format
msgid "Failed to open ServerStat file %s for write."
msgstr ""

#: src/message.h:155
#, c-format
msgid "ServerStat file %s saved successfully."
msgstr ""

#: src/message.h:156
#, c-format
msgid "Failed to write ServerStat to %s."
msgstr ""

#: src/message.h:159
#, c-format
msgid "Failed to establish connection, cause: %s"
msgstr ""

#: src/message.h:160
#, c-format
msgid "Network problem has occurred. cause:%s"
msgstr ""

#: src/message.h:162
#, c-format
msgid "Failed to load trusted CA certificates from %s. Cause: %s"
msgstr ""

#: src/message.h:164
#, c-format
msgid "Certificate verification failed. Cause: %s"
msgstr ""

#: src/message.h:165
msgid "No certificate found."
msgstr ""

#: src/message.h:166
msgid "Hostname not match."
msgstr ""

#: src/message.h:167
msgid "No files to download."
msgstr "Ningún archivo que descargar."

#: src/message.h:169
msgid ""
"You may encounter the certificate verification error with HTTPS server. See "
"--ca-certificate and --check-certificate option."
msgstr ""

#: src/message.h:171
#, c-format
msgid "Printing the contents of file '%s'..."
msgstr "Imprimiendo los conteidos del archivo «%s»..."

#: src/message.h:172
msgid "This file is neither Torrent nor Metalink file. Skipping."
msgstr "Este archivo no es de tipo Torrent ni Metalink. Saltando."

#: src/message.h:177
#, c-format
msgid "Is '%s' a file?"
msgstr ""

#: src/message.h:178
#, fuzzy, c-format
msgid "Failed to find given interface %s, cause: %s"
msgstr "Fallo al abrir el fichero %s, causa: %s"

#: src/message.h:181
msgid "Timeout."
msgstr "Ha expirado el tiempo de espera."

#: src/message.h:182
msgid "Invalid chunk size."
msgstr "Tamaño del trozo invalido"

#: src/message.h:183
#, c-format
msgid "Too large chunk. size=%d"
msgstr "Medida del trozo demasiado larga. Medida=%d"

#: src/message.h:184
msgid "Invalid header."
msgstr "Cabecera incorrecta."

#: src/message.h:185
msgid "Invalid response."
msgstr "Respuesta incorrecta."

#: src/message.h:186
msgid "No header found."
msgstr "No se ha encontrado la cabecera."

#: src/message.h:187
msgid "No status header."
msgstr "No hay cabecera de estado."

#: src/message.h:188
msgid "Proxy connection failed."
msgstr "Ha fallado la conexión con el proxy."

#: src/message.h:189
msgid "Connection failed."
msgstr "Ha fallado la conexión."

#: src/message.h:190
#, c-format
msgid ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"
msgstr ""
"El nombre del fichero pedido y el anotado previamente no son el mismo. "
"Esperábamos:%s Actual:%s"

#: src/message.h:191
#, c-format
msgid "The response status is not successful. status=%d"
msgstr "El estado de la respuesta no es satisfactorio. estado=%d"

#: src/message.h:192
#, c-format
msgid "Too large file size. size=%s"
msgstr "Medida del fichero demasiado larga. medida=%s"

#: src/message.h:193
#, c-format
msgid "Transfer encoding %s is not supported."
msgstr "No està soportada la codificación %s de la transferencia."

#: src/message.h:194
#, c-format
msgid "SSL initialization failed: %s"
msgstr "Ha fallado la inicialización SSL: %s"

#: src/message.h:195
msgid "SSL I/O error"
msgstr "Error de E/S SSL"

#: src/message.h:196
msgid "SSL protocol error"
msgstr "Error de protocolo SSL"

#: src/message.h:197
#, c-format
msgid "SSL unknown error %d"
msgstr "Error SSL desconocido %d"

#: src/message.h:198
#, c-format
msgid "SSL initialization failed: OpenSSL connect error %d"
msgstr "Ha fallado la inicialización SSL: error de conexión OpenSSL %d"

#: src/message.h:199
#, c-format
msgid "Size mismatch Expected:%s Actual:%s"
msgstr "Medida incorrecta, Esperada:%s Actual:%s"

#: src/message.h:200
msgid "Authorization failed."
msgstr "Ha fallado la autorización."

#: src/message.h:201
msgid "Got EOF from the server."
msgstr "Recibido EOF desde el servidor."

#: src/message.h:202
msgid "Got EOF from peer."
msgstr "Recibido EOF desde el igual."

#: src/message.h:203
msgid "Malformed meta info."
msgstr "meta info mal formada."

#: src/message.h:205
#, c-format
msgid "Failed to open the file %s, cause: %s"
msgstr "Fallo al abrir el fichero %s, causa: %s"

#: src/message.h:206
#, c-format
msgid "Failed to write into the file %s, cause: %s"
msgstr "Fallo al escribir en el fichero %s, causa: %s"

#: src/message.h:207
#, c-format
msgid "Failed to read from the file %s, cause: %s"
msgstr "Fallo al leer del fichero %s, causa: %s"

#: src/message.h:208
msgid "Failed to read data from disk."
msgstr "Fallo al leer datos del disco."

#: src/message.h:209
#, c-format
msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"
msgstr ""
"Fallo al calcular resumen SHA1 de o de una parte del fichero %s, causa: %s"

#: src/message.h:210
#, c-format
msgid "Failed to seek the file %s, cause: %s"
msgstr "Fallo al buscar en el fichero %s, causa: %s"

#: src/message.h:211
#, c-format
msgid "The offset is out of range, offset=%s"
msgstr "La desviación está fuera de límites, desviación=%s"

#: src/message.h:212
#, c-format
msgid "%s is not a directory."
msgstr "%s no es un directorio."

#: src/message.h:213
#, c-format
msgid "Failed to make the directory %s, cause: %s"
msgstr "Fallo al crear el directorio %s, causa: %s"

#: src/message.h:214
#, c-format
msgid "Failed to open the segment file %s, cause: %s"
msgstr "Fallo al abrir el fichero de segmentos %s, causa: %s"

#: src/message.h:215
#, c-format
msgid "Failed to write into the segment file %s, cause: %s"
msgstr "Fallo al escribir en el fichero de segmentos %s, causa: %s"

#: src/message.h:216
#, c-format
msgid "Failed to read from the segment file %s, cause: %s"
msgstr "Fallo al leer del fichero de segmentos %s, causa: %s"

#: src/message.h:218
#, c-format
msgid "Failed to open a socket, cause: %s"
msgstr "Fallo al abrir un zócalo, causa: %s"

#: src/message.h:219
#, c-format
msgid "Failed to set a socket option, cause: %s"
msgstr "Fallo al poner una opción del zócalo, causa: %s"

#: src/message.h:220
#, c-format
msgid "Failed to set a socket as blocking, cause: %s"
msgstr "Fallo al poner un zócalo como bloqueante, causa: %s"

#: src/message.h:221
#, c-format
msgid "Failed to set a socket as non-blocking, cause: %s"
msgstr "Fallo al poner un zócalo como no-bloqueante, causa: %s"

#: src/message.h:222
#, c-format
msgid "Failed to bind a socket, cause: %s"
msgstr "Fallo al conectar un zócalo, causa: %s"

#: src/message.h:223
#, c-format
msgid "Failed to listen to a socket, cause: %s"
msgstr "Fallo escuchando un zócalo, causa: %s"

#: src/message.h:224
#, c-format
msgid "Failed to accept a peer connection, cause: %s"
msgstr "Fallo al aceptar una conexión de igual, causa: %s"

#: src/message.h:225
#, c-format
msgid "Failed to get the name of socket, cause: %s"
msgstr "Fallo al coger el nombre del zócalo, causa: %s"

#: src/message.h:226
#, c-format
msgid "Failed to get the name of connected peer, cause: %s"
msgstr "Fallo al coger el nombre de un igual conectado, causa: %s"

#: src/message.h:227
#, c-format
msgid "Failed to resolve the hostname %s, cause: %s"
msgstr "Fallo al resolver el nombre de host %s,causa: %s"

#: src/message.h:228
#, c-format
msgid "Failed to connect to the host %s, cause: %s"
msgstr "Fallo al conectar al host %s, causa: %s"

#: src/message.h:229
#, c-format
msgid "Failed to check whether the socket is writable, cause: %s"
msgstr "Fallo al comprobar si se puede escribir en un zócalo, causa: %s"

#: src/message.h:230
#, c-format
msgid "Failed to check whether the socket is readable, cause: %s"
msgstr "Fallo al comprovar si se puede leer un zócalo, causa: %s"

#: src/message.h:231
#, c-format
msgid "Failed to send data, cause: %s"
msgstr "Fallo al enviar datos, causa: %s"

#: src/message.h:232
#, c-format
msgid "Failed to receive data, cause: %s"
msgstr "Fallo al recibir datos, causa: %s"

#: src/message.h:233
#, c-format
msgid "Failed to peek data, cause: %s"
msgstr "Fallo al revisar datos, causa: %s"

#: src/message.h:234
#, c-format
msgid "Unknown socket error %d (0x%x)"
msgstr "Error desconocido de zócalo %d (0x%x)"

#: src/message.h:235
#, c-format
msgid "File %s exists, but %s does not exist."
msgstr "fichero %s existe, pero %s no existe."

#: src/message.h:236
#, c-format
msgid "Invalid payload size for %s, size=%d. It should be %d."
msgstr ""
"La Medida de carga útil (payload) es incorrecta para %s, medida=%d. Ha de "
"ser %d."

#: src/message.h:237
#, c-format
msgid "Invalid ID=%d for %s. It should be %d."
msgstr "Incorrecto ID=%d para %s. Ha de ser %d."

#: src/message.h:238
#, c-format
msgid ""
"Chunk checksum validation failed. checksumIndex=%d, offset=%s, expectedHash=%"
"s, actualHash=%s"
msgstr ""
"Ha fallado la validación de la suma de comprobación del trozo. "
"índiceSumacomprobación=%d, desviación=%s, HashEsperado=%s, HashActual=%s"

#: src/message.h:239
msgid "Download aborted."
msgstr "Descarga abortada."

#: src/message.h:240
#, c-format
msgid "File %s is being downloaded by other command."
msgstr "El fichero %s està siendo descargado por otra orden."

#: src/message.h:241
msgid "Insufficient checksums."
msgstr "No hay bastantes sumas de comprobación."

#: src/message.h:242
#, c-format
msgid "Tracker returned failure reason: %s"
msgstr "El Seguidor ha devuelto fallo. razón: %s"

#: src/message.h:243
msgid "Flooding detected."
msgstr "Detectado sobrepasamiento."

#: src/message.h:244
#, c-format
msgid ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%d seconds)."
msgstr ""
"Liberamos la conexión debido a que no hemos intercambiado mensajes de "
"peticiones o piezas en el periodo establecido (%d seg.)."

#: src/message.h:245
msgid "The infoHash in torrent file doesn't match to one in .aria2 file."
msgstr ""
"El infoHash en el fichero torrent no concuerda con el del fichero .aria2."

#: src/message.h:246
#, c-format
msgid "No such file entry %s"
msgstr "No hay esta entrada en el fichero %s"

#: src/message.h:247
#, c-format
msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s"
msgstr "Velocidad de descarga demasiado lenta: %d <= %d(B/s), host:%s"

#: src/message.h:248
msgid "No HttpRequestEntry found."
msgstr "No hemos encontrado HttpRequestEntry."

#: src/message.h:249
#, c-format
msgid "Got %d status, but no location header provided."
msgstr "Hemos recibido estado %d, pero no nos da la cabecera de ubicación."

#: src/message.h:250
#, c-format
msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"
msgstr "Cabecera de rango incorrecta. Petición: %s-%s/%s, Respuesta: %s-%s/%s"

#: src/message.h:251
msgid "No file matched with your preference."
msgstr "No hay ningún fichero que concuerde con vuestra preferencia."

#: src/message.h:252
msgid "Exception caught"
msgstr "Excepcion capturada"

#: src/message.h:253
#, c-format
msgid "Max payload length exceeded or invalid. length = %u"
msgstr "Longitud de carga ulti excedida o es invalida,  longitud   = %u"

#: src/message.h:254
#, c-format
msgid "Invalid file length. Cannot continue download %s: local %s, remote %s"
msgstr ""
"Longitud de fichero incorrecta. No se puede continuar la descarga %s: local %"
"s, remoto %s"

#: src/BtSetup.cc:161
msgid "Errors occurred while binding port.\n"
msgstr "Han ocurrido errores mientras cogíamos el puerto.\n"

#~ msgid " -D, --daemon                 Run as daemon."
#~ msgstr " -D, --daemon                 Ejecutar como demonio."

#~ msgid "CUID#%d - Unregistering cuid from segmentManager."
#~ msgstr "CUID#%d - Des-registrando cuid en el Gestor de segmentos."

#~ msgid "Files:"
#~ msgstr "Ficheros:"