aria2/po/en@boldquot.po

# English translations for aria2 package.
# Copyright (C) 2010 Tatsuhiro Tsujikawa
# This file is distributed under the same license as the aria2 package.
# Automatically generated, 2010.
#
# All this catalog "translates" are quotation characters.
# The msgids must be ASCII and therefore cannot contain real quotation
# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
# and double quote (0x22). These substitutes look strange; see
# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
#
# This catalog translates grave accent (0x60) and apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019).
# It also translates pairs of apostrophe (0x27) to
# left single quotation mark (U+2018) and right single quotation mark (U+2019)
# and pairs of quotation mark (0x22) to
# left double quotation mark (U+201C) and right double quotation mark (U+201D).
#
# When output to an UTF-8 terminal, the quotation characters appear perfectly.
# When output to an ISO-8859-1 terminal, the single quotation marks are
# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
# grave/acute accent (by libiconv), and the double quotation marks are
# transliterated to 0x22.
# When output to an ASCII terminal, the single quotation marks are
# transliterated to apostrophes, and the double quotation marks are
# transliterated to 0x22.
#
# This catalog furthermore displays the text between the quotation marks in
# bold face, assuming the VT100/XTerm escape sequences.
#
msgid ""
msgstr ""
"Project-Id-Version: aria2 1.10.5\n"
"Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n"
"POT-Creation-Date: 2010-11-01 20:48+0900\n"
"PO-Revision-Date: 2010-11-01 20:48+0900\n"
"Last-Translator: Automatically generated\n"
"Language-Team: none\n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: src/DownloadEngine.cc:224
msgid ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."
msgstr ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."

#: src/DownloadEngine.cc:231
msgid "Emergency shutdown sequence commencing..."
msgstr "Emergency shutdown sequence commencing..."

#: src/MultiUrlRequestInfo.cc:114
msgid "aria2 will resume download if the transfer is restarted."
msgstr "aria2 will resume download if the transfer is restarted."

#: src/MultiUrlRequestInfo.cc:116
msgid ""
"If there are any errors, then see the log file. See '-l' option in help/man "
"page for details."
msgstr ""
"If there are any errors, then see the log file. See ‘-l’ option in "
"help/man page for details."

#: src/RequestGroupMan.cc:609
msgid "Download Results:"
msgstr "Download Results:"

#: src/RequestGroupMan.cc:669
msgid "Status Legend:"
msgstr "Status Legend:"

#: src/OptionHandler.cc:38
msgid "                              Default: "
msgstr "                              Default: "

#: src/OptionHandler.cc:39
msgid "                              Tags: "
msgstr "                              Tags: "

#: src/OptionHandler.cc:40
msgid "                              Possible Values: "
msgstr "                              Possible Values: "

#: src/OptionHandlerImpl.h:137
msgid "must be either 'true' or 'false'."
msgstr "must be either ‘true’ or 'false'."

#: src/OptionHandlerImpl.h:171 src/OptionHandlerImpl.h:220
#, c-format
msgid "must be between %s and %s."
msgstr "must be between %s and %s."

#: src/OptionHandlerImpl.h:217
#, c-format
msgid "must be smaller than or equal to %s."
msgstr "must be smaller than or equal to %s."

#: src/OptionHandlerImpl.h:223
#, c-format
msgid "must be greater than or equal to %s."
msgstr "must be greater than or equal to %s."

#: src/OptionHandlerImpl.h:226 src/OptionHandlerImpl.h:304
msgid "must be a number."
msgstr "must be a number."

#: src/OptionHandlerImpl.h:295
#, c-format
msgid "must be smaller than or equal to %.1f."
msgstr "must be smaller than or equal to %.1f."

#: src/OptionHandlerImpl.h:298
#, c-format
msgid "must be between %.1f and %.1f."
msgstr "must be between %.1f and %.1f."

#: src/OptionHandlerImpl.h:301
#, c-format
msgid "must be greater than or equal to %.1f."
msgstr "must be greater than or equal to %.1f."

#: src/OptionHandlerImpl.h:479
msgid "must be one of the following:"
msgstr "must be one of the following:"

#: src/OptionHandlerImpl.h:529
msgid "Unrecognized format"
msgstr "Unrecognized format"

#: src/OptionHandlerImpl.h:665
msgid "unrecognized proxy format"
msgstr "unrecognized proxy format"

#: src/usage_text.h:37
msgid ""
" -d, --dir=DIR                The directory to store the downloaded file."
msgstr ""
" -d, --dir=DIR                The directory to store the downloaded file."

#: src/usage_text.h:39
msgid ""
" -o, --out=FILE               The file name of the downloaded file. When -Z\n"
"                              option is used, this option is ignored."
msgstr ""
" -o, --out=FILE               The file name of the downloaded file. When -Z\n"
"                              option is used, this option is ignored."

#: src/usage_text.h:42
msgid ""
" -l, --log=LOG                The file name of the log file. If '-' is\n"
"                              specified, log is written to stdout."
msgstr ""
" -l, --log=LOG                The file name of the log file. If ‘-’ "
"is\n"
"                              specified, log is written to stdout."

#: src/usage_text.h:45
msgid ""
" -D, --daemon                 Run as daemon. The current working directory "
"will\n"
"                              be changed to \"/\" and standard input, "
"standard\n"
"                              output and standard error will be redirected "
"to\n"
"                              \"/dev/null\"."
msgstr ""
" -D, --daemon                 Run as daemon. The current working directory "
"will\n"
"                              be changed to “/” and standard input, "
"standard\n"
"                              output and standard error will be redirected "
"to\n"
"                              “/dev/null”."

#: src/usage_text.h:50
msgid ""
" -s, --split=N                Download a file using N connections. If more\n"
"                              than N URLs are given, first N URLs are used "
"and\n"
"                              remaining URLs are used for backup. If less "
"than\n"
"                              N URLs are given, those URLs are used more "
"than\n"
"                              once so that N connections total are made\n"
"                              simultaneously. The number of connections to "
"the\n"
"                              same host is restricted by\n"
"                              --max-connection-per-server option. Please see "
"-j\n"
"                              and --min-split-size option too.\n"
"                              Please note that in Metalink download, this\n"
"                              option has no effect and use -C option instead."
msgstr ""
" -s, --split=N                Download a file using N connections. If more\n"
"                              than N URLs are given, first N URLs are used "
"and\n"
"                              remaining URLs are used for backup. If less "
"than\n"
"                              N URLs are given, those URLs are used more "
"than\n"
"                              once so that N connections total are made\n"
"                              simultaneously. The number of connections to "
"the\n"
"                              same host is restricted by\n"
"                              --max-connection-per-server option. Please see "
"-j\n"
"                              and --min-split-size option too.\n"
"                              Please note that in Metalink download, this\n"
"                              option has no effect and use -C option instead."

#: src/usage_text.h:62
msgid ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured."
msgstr ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured."

#: src/usage_text.h:65
msgid " -t, --timeout=SEC            Set timeout in seconds."
msgstr " -t, --timeout=SEC            Set timeout in seconds."

#: src/usage_text.h:67
msgid " -m, --max-tries=N            Set number of tries. 0 means unlimited."
msgstr " -m, --max-tries=N            Set number of tries. 0 means unlimited."

#: src/usage_text.h:69
msgid ""
" --http-proxy=PROXY           Use this proxy server for HTTP. To erase\n"
"                              previously defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --http-proxy=PROXY           Use this proxy server for HTTP. To erase\n"
"                              previously defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."

#: src/usage_text.h:74
msgid ""
" --https-proxy=PROXY          Use this proxy server for HTTPS. To erase\n"
"                              previously defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --https-proxy=PROXY          Use this proxy server for HTTPS. To erase\n"
"                              previously defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."

#: src/usage_text.h:79
msgid ""
" --ftp-proxy=PROXY            Use this proxy server for FTP. To erase "
"previously\n"
"                              defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --ftp-proxy=PROXY            Use this proxy server for FTP. To erase "
"previously\n"
"                              defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."

#: src/usage_text.h:84
msgid ""
" --all-proxy=PROXY            Use this proxy server for all protocols. To "
"erase\n"
"                              previously defined proxy, use \"\".\n"
"                              You can override this setting and specify a\n"
"                              proxy server for a particular protocol using\n"
"                              --http-proxy, --https-proxy and --ftp-proxy\n"
"                              options.\n"
"                              This affects all URLs."
msgstr ""
" --all-proxy=PROXY            Use this proxy server for all protocols. To "
"erase\n"
"                              previously defined proxy, use \"\".\n"
"                              You can override this setting and specify a\n"
"                              proxy server for a particular protocol using\n"
"                              --http-proxy, --https-proxy and --ftp-proxy\n"
"                              options.\n"
"                              This affects all URLs."

#: src/usage_text.h:92
msgid " --http-user=USER             Set HTTP user. This affects all URLs."
msgstr " --http-user=USER             Set HTTP user. This affects all URLs."

#: src/usage_text.h:94
msgid " --http-passwd=PASSWD         Set HTTP password. This affects all URLs."
msgstr ""
" --http-passwd=PASSWD         Set HTTP password. This affects all URLs."

#: src/usage_text.h:96
msgid " --proxy-method=METHOD        Set the method to use in proxy request."
msgstr " --proxy-method=METHOD        Set the method to use in proxy request."

#: src/usage_text.h:98
msgid " --referer=REFERER            Set Referer. This affects all URLs."
msgstr " --referer=REFERER            Set Referer. This affects all URLs."

#: src/usage_text.h:100
msgid " --ftp-user=USER              Set FTP user. This affects all URLs."
msgstr " --ftp-user=USER              Set FTP user. This affects all URLs."

#: src/usage_text.h:102
msgid " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs."
msgstr " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs."

#: src/usage_text.h:104
msgid " --ftp-type=TYPE              Set FTP transfer type."
msgstr " --ftp-type=TYPE              Set FTP transfer type."

#: src/usage_text.h:106
msgid ""
" -p, --ftp-pasv[=true|false]  Use the passive mode in FTP. If false is "
"given,\n"
"                              the active mode will be used."
msgstr ""
" -p, --ftp-pasv[=true|false]  Use the passive mode in FTP. If false is "
"given,\n"
"                              the active mode will be used."

#: src/usage_text.h:109
msgid ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads."
msgstr ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads."

#: src/usage_text.h:115
msgid ""
" --max-overall-download-limit=SPEED Set max overall download speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the download speed per download, use\n"
"                              --max-download-limit option."
msgstr ""
" --max-overall-download-limit=SPEED Set max overall download speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the download speed per download, use\n"
"                              --max-download-limit option."

#: src/usage_text.h:121
msgid ""
" --max-download-limit=SPEED   Set max download speed per each download in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall download speed, use\n"
"                              --max-overall-download-limit option."
msgstr ""
" --max-download-limit=SPEED   Set max download speed per each download in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall download speed, use\n"
"                              --max-overall-download-limit option."

#: src/usage_text.h:127
msgid ""
" --file-allocation=METHOD     Specify file allocation method.\n"
"                              'none' doesn't pre-allocate file space. "
"'prealloc'\n"
"                              pre-allocates file space before download "
"begins.\n"
"                              This may take some time depending on the size "
"of\n"
"                              the file.\n"
"                              If you are using newer file systems such as "
"ext4\n"
"                              (with extents support), btrfs or xfs, 'falloc' "
"is\n"
"                              your best choice. It allocates large(few GiB)\n"
"                              files almost instantly. Don't use 'falloc' "
"with\n"
"                              legacy file systems such as ext3 because it "
"takes\n"
"                              almost same time as 'prealloc' and it blocks "
"aria2\n"
"                              entirely until allocation finishes. 'falloc' "
"may\n"
"                              not be available if your system doesn't have\n"
"                              posix_fallocate() function."
msgstr ""
" --file-allocation=METHOD     Specify file allocation method.\n"
"                              ‘none’ doesn't pre-allocate file space. "
"‘prealloc’\n"
"                              pre-allocates file space before download "
"begins.\n"
"                              This may take some time depending on the size "
"of\n"
"                              the file.\n"
"                              If you are using newer file systems such as "
"ext4\n"
"                              (with extents support), btrfs or xfs, "
"‘falloc’ is\n"
"                              your best choice. It allocates large(few GiB)\n"
"                              files almost instantly. Don't use ‘falloc"
"[0m’ with\n"
"                              legacy file systems such as ext3 because it "
"takes\n"
"                              almost same time as ‘prealloc’ and it "
"blocks aria2\n"
"                              entirely until allocation finishes. ‘falloc"
"[0m’ may\n"
"                              not be available if your system doesn't have\n"
"                              posix_fallocate() function."

#: src/usage_text.h:142
msgid ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."

#: src/usage_text.h:146
msgid ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"
msgstr ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"

#: src/usage_text.h:150
msgid ""
" --allow-overwrite=true|false Restart download from scratch if the\n"
"                              corresponding control file doesn't exist.  "
"See\n"
"                              also --auto-file-renaming option."
msgstr ""
" --allow-overwrite=true|false Restart download from scratch if the\n"
"                              corresponding control file doesn't exist.  "
"See\n"
"                              also --auto-file-renaming option."

#: src/usage_text.h:154
msgid ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."
msgstr ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."

#: src/usage_text.h:159
msgid ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities."
msgstr ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities."

#: src/usage_text.h:163
msgid ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended."
msgstr ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended."

#: src/usage_text.h:169
msgid ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required."
msgstr ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required."

#: src/usage_text.h:180
msgid ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection."
msgstr ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection."

#: src/usage_text.h:182
msgid " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining."
msgstr " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining."

#: src/usage_text.h:184
msgid ""
" -V, --check-integrity[=true|false] Check file integrity by validating "
"piece\n"
"                              hashes. This option has effect only in "
"BitTorrent\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file. See also --bt-hash-check-seed "
"option."
msgstr ""
" -V, --check-integrity[=true|false] Check file integrity by validating "
"piece\n"
"                              hashes. This option has effect only in "
"BitTorrent\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file. See also --bt-hash-check-seed "
"option."

#: src/usage_text.h:190
msgid ""
" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n"
"                              --check-integrity option and file is "
"complete,\n"
"                              continue to seed file. If you want to check "
"file\n"
"                              and download it only when it is damaged or\n"
"                              incomplete, set this option to false.\n"
"                              This option has effect only on BitTorrent\n"
"                              download."
msgstr ""
" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n"
"                              --check-integrity option and file is "
"complete,\n"
"                              continue to seed file. If you want to check "
"file\n"
"                              and download it only when it is damaged or\n"
"                              incomplete, set this option to false.\n"
"                              This option has effect only on BitTorrent\n"
"                              download."

#: src/usage_text.h:198
msgid ""
" --realtime-chunk-checksum=true|false  Validate chunk of data by "
"calculating\n"
"                              checksum while downloading a file if chunk\n"
"                              checksums are provided."
msgstr ""
" --realtime-chunk-checksum=true|false  Validate chunk of data by "
"calculating\n"
"                              checksum while downloading a file if chunk\n"
"                              checksums are provided."

#: src/usage_text.h:202
msgid ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."
msgstr ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."

#: src/usage_text.h:209
msgid " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."
msgstr " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."

#: src/usage_text.h:211
msgid " -n, --no-netrc               Disables netrc support."
msgstr " -n, --no-netrc               Disables netrc support."

#: src/usage_text.h:213
msgid ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when '-' is specified.\n"
"                              The additional out and dir options can be\n"
"                              specified after each line of URIs. This "
"optional\n"
"                              line must start with white space(s). See "
"INPUT\n"
"                              FILE section of man page for details."
msgstr ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when ‘-’ is "
"specified.\n"
"                              The additional out and dir options can be\n"
"                              specified after each line of URIs. This "
"optional\n"
"                              line must start with white space(s). See "
"INPUT\n"
"                              FILE section of man page for details."

#: src/usage_text.h:222
msgid ""
" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads "
"for\n"
"                              every static (HTTP/FTP) URL, torrent and "
"metalink.\n"
"                              See also -s and -C options."
msgstr ""
" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads "
"for\n"
"                              every static (HTTP/FTP) URL, torrent and "
"metalink.\n"
"                              See also -s and -C options."

#: src/usage_text.h:226
msgid ""
" --load-cookies=FILE          Load Cookies from FILE using the Firefox3 "
"format\n"
"                              and Mozilla/Firefox(1.x/2.x)/Netscape format."
msgstr ""
" --load-cookies=FILE          Load Cookies from FILE using the Firefox3 "
"format\n"
"                              and Mozilla/Firefox(1.x/2.x)/Netscape format."

#: src/usage_text.h:229
msgid ""
" --save-cookies=FILE          Save Cookies to FILE in Mozilla/Firefox(1.x/2."
"x)/\n"
"                              Netscape format. If FILE already exists, it "
"is\n"
"                              overwritten. Session Cookies are also saved "
"and\n"
"                              their expiry values are treated as 0."
msgstr ""
" --save-cookies=FILE          Save Cookies to FILE in Mozilla/Firefox(1.x/2."
"x)/\n"
"                              Netscape format. If FILE already exists, it "
"is\n"
"                              overwritten. Session Cookies are also saved "
"and\n"
"                              their expiry values are treated as 0."

#: src/usage_text.h:234
msgid ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."
msgstr ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."

#: src/usage_text.h:238
msgid ""
" --select-file=INDEX...       Set file to download by specifying its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: \"3,6\".\n"
"                              You can also use '-' to specify a range: "
"\"1-5\".\n"
"                              ',' and '-' can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."
msgstr ""
" --select-file=INDEX...       Set file to download by specifying its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: “3,6"
"[0m”.\n"
"                              You can also use ‘-’ to specify a range: "
"“1-5”.\n"
"                              ‘,’ and ‘-’ can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."

#: src/usage_text.h:247
msgid " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."
msgstr " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."

#: src/usage_text.h:249
msgid ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."

#: src/usage_text.h:259
msgid ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file."
msgstr ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file."

#: src/usage_text.h:262
msgid ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: “6881,6885”. You can also "
"use ‘-’\n"
"                              to specify a range: “6881-6999”. ‘,"
"[0m’ and ‘-’ can\n"
"                              be used together."

#: src/usage_text.h:268
msgid ""
" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the upload speed per torrent, use\n"
"                              --max-upload-limit option."
msgstr ""
" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the upload speed per torrent, use\n"
"                              --max-upload-limit option."

#: src/usage_text.h:274
msgid ""
" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall upload speed, use\n"
"                              --max-overall-upload-limit option."
msgstr ""
" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall upload speed, use\n"
"                              --max-overall-upload-limit option."

#: src/usage_text.h:280
msgid ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."
msgstr ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."

#: src/usage_text.h:283
msgid ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO.\n"
"                              You are strongly encouraged to specify equals "
"or\n"
"                              more than 1.0 here. Specify 0.0 if you intend "
"to\n"
"                              do seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."
msgstr ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO.\n"
"                              You are strongly encouraged to specify equals "
"or\n"
"                              more than 1.0 here. Specify 0.0 if you intend "
"to\n"
"                              do seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."

#: src/usage_text.h:292
msgid ""
" --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20 bytes are\n"
"                              used. If less than 20 bytes are specified, "
"random\n"
"                              byte data are added to make its length 20 "
"bytes."
msgstr ""
" --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20 bytes are\n"
"                              used. If less than 20 bytes are specified, "
"random\n"
"                              byte data are added to make its length 20 "
"bytes."

#: src/usage_text.h:298
msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."
msgstr " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."

#: src/usage_text.h:300
msgid " --enable-dht[=true|false]    Enable IPv4 DHT functionality."
msgstr " --enable-dht[=true|false]    Enable IPv4 DHT functionality."

#: src/usage_text.h:302
msgid ""
" --dht-listen-port=PORT...    Set UDP listening port for both IPv4 and IPv6\n"
"                              DHT. Multiple ports can be specified by using\n"
"                              ',', for example: \"6881,6885\". You can also\n"
"                              use '-' to specify a range: \"6881-6999\". "
"','\n"
"                              and '-' can be used together."
msgstr ""
" --dht-listen-port=PORT...    Set UDP listening port for both IPv4 and IPv6\n"
"                              DHT. Multiple ports can be specified by using\n"
"                              ',', for example: “6881,6885”. You can "
"also\n"
"                              use ‘-’ to specify a range: “6881-6999"
"[0m”. ‘,’\n"
"                              and ‘-’ can be used together."

#: src/usage_text.h:308
msgid ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to IPv4 "
"DHT\n"
"                              network."
msgstr ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to IPv4 "
"DHT\n"
"                              network."

#: src/usage_text.h:311
msgid ""
" --dht-file-path=PATH         Change the IPv4 DHT routing table file to PATH."
msgstr ""
" --dht-file-path=PATH         Change the IPv4 DHT routing table file to PATH."

#: src/usage_text.h:313
msgid ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses the lowest one which "
"satisfies\n"
"                              the given level."
msgstr ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses the lowest one which "
"satisfies\n"
"                              the given level."

#: src/usage_text.h:318
msgid ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."
msgstr ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."

#: src/usage_text.h:323
msgid ""
" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n"
"                              torrent is lower than SPEED, aria2 "
"temporarily\n"
"                              increases the number of peers to try for more\n"
"                              download speed. Configuring this option with "
"your\n"
"                              preferred download speed can increase your\n"
"                              download speed in some cases.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n"
"                              torrent is lower than SPEED, aria2 "
"temporarily\n"
"                              increases the number of peers to try for more\n"
"                              download speed. Configuring this option with "
"your\n"
"                              preferred download speed can increase your\n"
"                              download speed in some cases.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."

#: src/usage_text.h:331
msgid ""
" --bt-max-open-files=NUM      Specify maximum number of files to open in "
"each\n"
"                              BitTorrent download."
msgstr ""
" --bt-max-open-files=NUM      Specify maximum number of files to open in "
"each\n"
"                              BitTorrent download."

#: src/usage_text.h:334
msgid ""
" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"
"                              verifying piece hashes."
msgstr ""
" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"
"                              verifying piece hashes."

#: src/usage_text.h:337
msgid ""
" --bt-max-peers=NUM           Specify the maximum number of peers per "
"torrent.\n"
"                              0 means unlimited.\n"
"                              See also --bt-request-peer-speed-limit option."
msgstr ""
" --bt-max-peers=NUM           Specify the maximum number of peers per "
"torrent.\n"
"                              0 means unlimited.\n"
"                              See also --bt-request-peer-speed-limit option."

#: src/usage_text.h:341
msgid ""
" -M, --metalink-file=METALINK_FILE The file path to the .metalink file. "
"Reads\n"
"                              input from stdin when '-' is specified."
msgstr ""
" -M, --metalink-file=METALINK_FILE The file path to the .metalink file. "
"Reads\n"
"                              input from stdin when ‘-’ is specified."

#: src/usage_text.h:344
msgid ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously. Some Metalinks regulate the\n"
"                              number of servers to connect. aria2 strictly\n"
"                              respects them. This means that if Metalink "
"defines\n"
"                              the maxconnections attribute lower than\n"
"                              NUM_SERVERS, then aria2 uses the value of\n"
"                              maxconnections attribute instead of "
"NUM_SERVERS.\n"
"                              See also -s and -j options."
msgstr ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously. Some Metalinks regulate the\n"
"                              number of servers to connect. aria2 strictly\n"
"                              respects them. This means that if Metalink "
"defines\n"
"                              the maxconnections attribute lower than\n"
"                              NUM_SERVERS, then aria2 uses the value of\n"
"                              maxconnections attribute instead of "
"NUM_SERVERS.\n"
"                              See also -s and -j options."

#: src/usage_text.h:353
msgid " --metalink-version=VERSION   The version of the file to download."
msgstr " --metalink-version=VERSION   The version of the file to download."

#: src/usage_text.h:355
msgid " --metalink-language=LANGUAGE The language of the file to download."
msgstr " --metalink-language=LANGUAGE The language of the file to download."

#: src/usage_text.h:357
msgid ""
" --metalink-os=OS             The operating system of the file to download."
msgstr ""
" --metalink-os=OS             The operating system of the file to download."

#: src/usage_text.h:359
msgid ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-delimited list of locations is\n"
"                              acceptable."
msgstr ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-delimited list of locations is\n"
"                              acceptable."

#: src/usage_text.h:363
msgid ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify "
"'none'\n"
"                              if you don't have any preferred protocol."
msgstr ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify "
"‘none’\n"
"                              if you don't have any preferred protocol."

#: src/usage_text.h:366
msgid ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metalink or content type of\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metalink or content type of\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."

#: src/usage_text.h:376
msgid ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."
msgstr ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."

#: src/usage_text.h:382
msgid " -v, --version                Print the version number and exit."
msgstr " -v, --version                Print the version number and exit."

#: src/usage_text.h:384
msgid ""
" -h, --help[=TAG|KEYWORD]     Print usage and exit.\n"
"                              The help messages are classified with tags. A "
"tag\n"
"                              starts with \"#\". For example, type \"--"
"help=#http\"\n"
"                              to get the usage for the options tagged with\n"
"                              \"#http\". If non-tag word is given, print the "
"usage\n"
"                              for the options whose name includes that word."
msgstr ""
" -h, --help[=TAG|KEYWORD]     Print usage and exit.\n"
"                              The help messages are classified with tags. A "
"tag\n"
"                              starts with “#”. For example, type “--"
"help=#http”\n"
"                              to get the usage for the options tagged with\n"
"                              “#http”. If non-tag word is given, print "
"the usage\n"
"                              for the options whose name includes that word."

#: src/usage_text.h:391
msgid " --no-conf                    Disable loading aria2.conf file."
msgstr " --no-conf                    Disable loading aria2.conf file."

#: src/usage_text.h:393
msgid ""
" --conf-path=PATH             Change the configuration file path to PATH."
msgstr ""
" --conf-path=PATH             Change the configuration file path to PATH."

#: src/usage_text.h:395
msgid ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."
msgstr ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."

#: src/usage_text.h:398
msgid ""
" --header=HEADER              Append HEADER to HTTP request header. You can "
"use\n"
"                              this option repeatedly to specify more than "
"one\n"
"                              header:\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"
msgstr ""
" --header=HEADER              Append HEADER to HTTP request header. You can "
"use\n"
"                              this option repeatedly to specify more than "
"one\n"
"                              header:\n"
"                              aria2c --header=“X-A: b78” --"
"header=“X-B: 9J1”\n"
"                              http://host/file"

#: src/usage_text.h:404
msgid " -q, --quiet[=true|false]     Make aria2 quiet(no console output)."
msgstr " -q, --quiet[=true|false]     Make aria2 quiet(no console output)."

#: src/usage_text.h:406
msgid " --async-dns[=true|false]     Enable asynchronous DNS."
msgstr " --async-dns[=true|false]     Enable asynchronous DNS."

#: src/usage_text.h:408
msgid " --ftp-reuse-connection[=true|false] Reuse connection in FTP."
msgstr " --ftp-reuse-connection[=true|false] Reuse connection in FTP."

#: src/usage_text.h:410
msgid ""
" --summary-interval=SEC       Set interval to output download progress "
"summary.\n"
"                              Setting 0 suppresses the output."
msgstr ""
" --summary-interval=SEC       Set interval to output download progress "
"summary.\n"
"                              Setting 0 suppresses the output."

#: src/usage_text.h:413
msgid " --log-level=LEVEL            Set log level to output."
msgstr " --log-level=LEVEL            Set log level to output."

#: src/usage_text.h:415
msgid ""
" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from "
"the\n"
"                              remote HTTP/FTP server and if it is "
"available,\n"
"                              apply it to the local file."
msgstr ""
" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from "
"the\n"
"                              remote HTTP/FTP server and if it is "
"available,\n"
"                              apply it to the local file."

#: src/usage_text.h:419
msgid ""
" --connect-timeout=SEC        Set the connect timeout in seconds to "
"establish\n"
"                              connection to HTTP/FTP/proxy server. After "
"the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --timeout option is used instead."
msgstr ""
" --connect-timeout=SEC        Set the connect timeout in seconds to "
"establish\n"
"                              connection to HTTP/FTP/proxy server. After "
"the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --timeout option is used instead."

#: src/usage_text.h:424
msgid ""
" --max-file-not-found=NUM     If aria2 receives `file not found' status from "
"the\n"
"                              remote HTTP/FTP servers NUM times without "
"getting\n"
"                              a single byte, then force the download to "
"fail.\n"
"                              Specify 0 to disable this option.\n"
"                              This options is effective only when using\n"
"                              HTTP/FTP servers."
msgstr ""
" --max-file-not-found=NUM     If aria2 receives ‘file not found’ "
"status from the\n"
"                              remote HTTP/FTP servers NUM times without "
"getting\n"
"                              a single byte, then force the download to "
"fail.\n"
"                              Specify 0 to disable this option.\n"
"                              This options is effective only when using\n"
"                              HTTP/FTP servers."

#: src/usage_text.h:431
msgid ""
" --uri-selector=SELECTOR      Specify URI selection algorithm.\n"
"                              If 'inorder' is given, URI is tried in the "
"order\n"
"                              appeared in the URI list.\n"
"                              If 'feedback' is given, aria2 uses download "
"speed\n"
"                              observed in the previous downloads and choose\n"
"                              fastest server in the URI list. This also\n"
"                              effectively skips dead mirrors. The observed\n"
"                              download speed is a part of performance "
"profile\n"
"                              of servers mentioned in --server-stat-of and\n"
"                              --server-stat-if options.\n"
"                              If 'adaptive' is given, selects one of the "
"best\n"
"                              mirrors for the first and reserved "
"connections.\n"
"                              For supplementary ones, it returns mirrors "
"which\n"
"                              has not been tested yet, and if each of them "
"has\n"
"                              already been tested, returns mirrors which has "
"to\n"
"                              be tested again. Otherwise, it doesn't select\n"
"                              anymore mirrors. Like 'feedback', it uses a\n"
"                              performance profile of servers."
msgstr ""
" --uri-selector=SELECTOR      Specify URI selection algorithm.\n"
"                              If ‘inorder’ is given, URI is tried in "
"the order\n"
"                              appeared in the URI list.\n"
"                              If ‘feedback’ is given, aria2 uses "
"download speed\n"
"                              observed in the previous downloads and choose\n"
"                              fastest server in the URI list. This also\n"
"                              effectively skips dead mirrors. The observed\n"
"                              download speed is a part of performance "
"profile\n"
"                              of servers mentioned in --server-stat-of and\n"
"                              --server-stat-if options.\n"
"                              If ‘adaptive’ is given, selects one of "
"the best\n"
"                              mirrors for the first and reserved "
"connections.\n"
"                              For supplementary ones, it returns mirrors "
"which\n"
"                              has not been tested yet, and if each of them "
"has\n"
"                              already been tested, returns mirrors which has "
"to\n"
"                              be tested again. Otherwise, it doesn't select\n"
"                              anymore mirrors. Like 'feedback', it uses a\n"
"                              performance profile of servers."

#: src/usage_text.h:450
msgid ""
" --server-stat-of=FILE        Specify the filename to which performance "
"profile\n"
"                              of the servers is saved. You can load saved "
"data\n"
"                              using --server-stat-if option."
msgstr ""
" --server-stat-of=FILE        Specify the filename to which performance "
"profile\n"
"                              of the servers is saved. You can load saved "
"data\n"
"                              using --server-stat-if option."

#: src/usage_text.h:454
msgid ""
" --server-stat-if=FILE        Specify the filename to load performance "
"profile\n"
"                              of the servers. The loaded data will be used "
"in\n"
"                              some URI selector such as 'feedback'.\n"
"                              See also --uri-selector option"
msgstr ""
" --server-stat-if=FILE        Specify the filename to load performance "
"profile\n"
"                              of the servers. The loaded data will be used "
"in\n"
"                              some URI selector such as 'feedback'.\n"
"                              See also --uri-selector option"

#: src/usage_text.h:459
msgid ""
" --server-stat-timeout=SEC    Specifies timeout in seconds to invalidate\n"
"                              performance profile of the servers since the "
"last\n"
"                              contact to them."
msgstr ""
" --server-stat-timeout=SEC    Specifies timeout in seconds to invalidate\n"
"                              performance profile of the servers since the "
"last\n"
"                              contact to them."

#: src/usage_text.h:463
msgid ""
" --auto-save-interval=SEC     Save a control file(*.aria2) every SEC "
"seconds.\n"
"                              If 0 is given, a control file is not saved "
"during\n"
"                              download. aria2 saves a control file when it "
"stops\n"
"                              regardless of the value."
msgstr ""
" --auto-save-interval=SEC     Save a control file(*.aria2) every SEC "
"seconds.\n"
"                              If 0 is given, a control file is not saved "
"during\n"
"                              download. aria2 saves a control file when it "
"stops\n"
"                              regardless of the value."

#: src/usage_text.h:468
msgid ""
" --certificate=FILE           Use the client certificate in FILE.\n"
"                              The certificate must be in PEM format.\n"
"                              You may use --private-key option to specify "
"the\n"
"                              private key."
msgstr ""
" --certificate=FILE           Use the client certificate in FILE.\n"
"                              The certificate must be in PEM format.\n"
"                              You may use --private-key option to specify "
"the\n"
"                              private key."

#: src/usage_text.h:473
msgid ""
" --private-key=FILE           Use the private key in FILE.\n"
"                              The private key must be decrypted and in PEM\n"
"                              format. See also --certificate option."
msgstr ""
" --private-key=FILE           Use the private key in FILE.\n"
"                              The private key must be decrypted and in PEM\n"
"                              format. See also --certificate option."

#: src/usage_text.h:477
msgid ""
" --ca-certificate=FILE        Use the certificate authorities in FILE to "
"verify\n"
"                              the peers. The certificate file must be in "
"PEM\n"
"                              format and can contain multiple CA "
"certificates.\n"
"                              Use --check-certificate option to enable\n"
"                              verification."
msgstr ""
" --ca-certificate=FILE        Use the certificate authorities in FILE to "
"verify\n"
"                              the peers. The certificate file must be in "
"PEM\n"
"                              format and can contain multiple CA "
"certificates.\n"
"                              Use --check-certificate option to enable\n"
"                              verification."

#: src/usage_text.h:483
msgid ""
" --check-certificate[=true|false] Verify the peer using certificates "
"specified\n"
"                              in --ca-certificate option."
msgstr ""
" --check-certificate[=true|false] Verify the peer using certificates "
"specified\n"
"                              in --ca-certificate option."

#: src/usage_text.h:486
msgid ""
" --no-proxy=DOMAINS           Specify comma separated hostnames, domains or\n"
"                              network address with or without CIDR block "
"where\n"
"                              proxy should not be used."
msgstr ""
" --no-proxy=DOMAINS           Specify comma separated hostnames, domains or\n"
"                              network address with or without CIDR block "
"where\n"
"                              proxy should not be used."

#: src/usage_text.h:490
msgid ""
" --use-head[=true|false]      Use HEAD method for the first request to the "
"HTTP\n"
"                              server."
msgstr ""
" --use-head[=true|false]      Use HEAD method for the first request to the "
"HTTP\n"
"                              server."

#: src/usage_text.h:493
msgid " --event-poll=POLL            Specify the method for polling events."
msgstr " --event-poll=POLL            Specify the method for polling events."

#: src/usage_text.h:495
msgid ""
" --xml-rpc-listen-port=PORT   Specify a port number for XML-RPC server to "
"listen\n"
"                              to."
msgstr ""
" --xml-rpc-listen-port=PORT   Specify a port number for XML-RPC server to "
"listen\n"
"                              to."

#: src/usage_text.h:498
msgid ""
" --enable-xml-rpc[=true|false] Enable XML-RPC server.\n"
"                              It is strongly recommended to set username "
"and\n"
"                              password using --xml-rpc-user and --xml-rpc-"
"passwd\n"
"                              option. See also --xml-rpc-listen-port option."
msgstr ""
" --enable-xml-rpc[=true|false] Enable XML-RPC server.\n"
"                              It is strongly recommended to set username "
"and\n"
"                              password using --xml-rpc-user and --xml-rpc-"
"passwd\n"
"                              option. See also --xml-rpc-listen-port option."

#: src/usage_text.h:503
msgid ""
" --xml-rpc-max-request-size=SIZE Set max size of XML-RPC request. If aria2\n"
"                              detects the request is more than SIZE bytes, "
"it\n"
"                              drops connection."
msgstr ""
" --xml-rpc-max-request-size=SIZE Set max size of XML-RPC request. If aria2\n"
"                              detects the request is more than SIZE bytes, "
"it\n"
"                              drops connection."

#: src/usage_text.h:507
msgid " --xml-rpc-user=USER          Set XML-RPC user."
msgstr " --xml-rpc-user=USER          Set XML-RPC user."

#: src/usage_text.h:509
msgid " --xml-rpc-passwd=PASSWD      Set XML-RPC password."
msgstr " --xml-rpc-passwd=PASSWD      Set XML-RPC password."

#: src/usage_text.h:511
msgid ""
" --bt-external-ip=IPADDRESS   Specify the external IP address to report to "
"a\n"
"                              BitTorrent tracker. Although this function is\n"
"                              named 'external', it can accept any kind of "
"IP\n"
"                              addresses."
msgstr ""
" --bt-external-ip=IPADDRESS   Specify the external IP address to report to "
"a\n"
"                              BitTorrent tracker. Although this function is\n"
"                              named 'external', it can accept any kind of "
"IP\n"
"                              addresses."

#: src/usage_text.h:516
msgid ""
" --http-auth-challenge[=true|false] Send HTTP authorization header only when "
"it\n"
"                              is requested by the server. If false is set, "
"then\n"
"                              authorization header is always sent to the "
"server.\n"
"                              There is an exception: if username and "
"password\n"
"                              are embedded in URI, authorization header is\n"
"                              always sent to the server regardless of this\n"
"                              option."
msgstr ""
" --http-auth-challenge[=true|false] Send HTTP authorization header only when "
"it\n"
"                              is requested by the server. If false is set, "
"then\n"
"                              authorization header is always sent to the "
"server.\n"
"                              There is an exception: if username and "
"password\n"
"                              are embedded in URI, authorization header is\n"
"                              always sent to the server regardless of this\n"
"                              option."

#: src/usage_text.h:524
msgid ""
" -O, --index-out=INDEX=PATH   Set file path for file with index=INDEX. You "
"can\n"
"                              find the file index using the --show-files "
"option.\n"
"                              PATH is a relative path to the path specified "
"in\n"
"                              --dir option. You can use this option "
"multiple\n"
"                              times."
msgstr ""
" -O, --index-out=INDEX=PATH   Set file path for file with index=INDEX. You "
"can\n"
"                              find the file index using the --show-files "
"option.\n"
"                              PATH is a relative path to the path specified "
"in\n"
"                              --dir option. You can use this option "
"multiple\n"
"                              times."

#: src/usage_text.h:530
msgid ""
" --dry-run[=true|false]       If true is given, aria2 just checks whether "
"the\n"
"                              remote file is available and doesn't download\n"
"                              data. This option has effect on HTTP/FTP "
"download.\n"
"                              BitTorrent downloads are canceled if true is\n"
"                              specified."
msgstr ""
" --dry-run[=true|false]       If true is given, aria2 just checks whether "
"the\n"
"                              remote file is available and doesn't download\n"
"                              data. This option has effect on HTTP/FTP "
"download.\n"
"                              BitTorrent downloads are canceled if true is\n"
"                              specified."

#: src/usage_text.h:536
msgid ""
" --bt-tracker-interval=SEC    Set the interval in seconds between tracker\n"
"                              requests. This completely overrides interval "
"value\n"
"                              and aria2 just uses this value and ignores "
"the\n"
"                              min interval and interval value in the "
"response of\n"
"                              tracker. If 0 is set, aria2 determines "
"interval\n"
"                              based on the response of tracker and the "
"download\n"
"                              progress."
msgstr ""
" --bt-tracker-interval=SEC    Set the interval in seconds between tracker\n"
"                              requests. This completely overrides interval "
"value\n"
"                              and aria2 just uses this value and ignores "
"the\n"
"                              min interval and interval value in the "
"response of\n"
"                              tracker. If 0 is set, aria2 determines "
"interval\n"
"                              based on the response of tracker and the "
"download\n"
"                              progress."

#: src/usage_text.h:544
msgid ""
" --on-download-complete=COMMAND Set the command to be executed when "
"download\n"
"                              completes.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""
" --on-download-complete=COMMAND Set the command to be executed when "
"download\n"
"                              completes.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."

#: src/usage_text.h:550
msgid ""
" --on-download-start=COMMAND  Set the command to be executed when download\n"
"                              starts up. COMMAND must take just one argument "
"and\n"
"                              GID is passed to COMMAND as a first argument."
msgstr ""
" --on-download-start=COMMAND  Set the command to be executed when download\n"
"                              starts up. COMMAND must take just one argument "
"and\n"
"                              GID is passed to COMMAND as a first argument."

#: src/usage_text.h:554
msgid ""
" --on-download-pause=COMMAND  Set the command to be executed when download\n"
"                              is paused.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""
" --on-download-pause=COMMAND  Set the command to be executed when download\n"
"                              is paused.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."

#: src/usage_text.h:559
msgid ""
" --on-download-error=COMMAND  Set the command to be executed when download\n"
"                              aborts due to error.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""
" --on-download-error=COMMAND  Set the command to be executed when download\n"
"                              aborts due to error.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."

#: src/usage_text.h:565
msgid ""
" --on-download-stop=COMMAND   Set the command to be executed when download\n"
"                              stops. You can override the command to be "
"executed\n"
"                              for particular download result using\n"
"                              --on-download-complete and --on-download-"
"error. If\n"
"                              they are specified, command specified in this\n"
"                              option is not executed.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""
" --on-download-stop=COMMAND   Set the command to be executed when download\n"
"                              stops. You can override the command to be "
"executed\n"
"                              for particular download result using\n"
"                              --on-download-complete and --on-download-"
"error. If\n"
"                              they are specified, command specified in this\n"
"                              option is not executed.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."

#: src/usage_text.h:574
msgid ""
" --bt-stop-timeout=SEC        Stop BitTorrent download if download speed is "
"0 in\n"
"                              consecutive SEC seconds. If 0 is given, this\n"
"                              feature is disabled."
msgstr ""
" --bt-stop-timeout=SEC        Stop BitTorrent download if download speed is "
"0 in\n"
"                              consecutive SEC seconds. If 0 is given, this\n"
"                              feature is disabled."

#: src/usage_text.h:578
msgid ""
" --xml-rpc-listen-all[=true|false] Listen incoming XML-RPC requests on all\n"
"                              network interfaces. If false is given, listen "
"only\n"
"                              on local loopback interface."
msgstr ""
" --xml-rpc-listen-all[=true|false] Listen incoming XML-RPC requests on all\n"
"                              network interfaces. If false is given, listen "
"only\n"
"                              on local loopback interface."

#: src/usage_text.h:582
msgid ""
" --bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and "
"last\n"
"                              pieces of each file first. This is useful for\n"
"                              previewing files. The argument can contain 2\n"
"                              keywords:head and tail. To include both "
"keywords,\n"
"                              they must be separated by comma. These "
"keywords\n"
"                              can take one parameter, SIZE. For example, if\n"
"                              head=SIZE is specified, pieces in the range "
"of\n"
"                              first SIZE bytes of each file get higher "
"priority.\n"
"                              tail=SIZE means the range of last SIZE bytes "
"of\n"
"                              each file. SIZE can include K or M(1K = 1024, "
"1M =\n"
"                              1024K). If SIZE is omitted, SIZE=1M is used."
msgstr ""
" --bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and "
"last\n"
"                              pieces of each file first. This is useful for\n"
"                              previewing files. The argument can contain 2\n"
"                              keywords:head and tail. To include both "
"keywords,\n"
"                              they must be separated by comma. These "
"keywords\n"
"                              can take one parameter, SIZE. For example, if\n"
"                              head=SIZE is specified, pieces in the range "
"of\n"
"                              first SIZE bytes of each file get higher "
"priority.\n"
"                              tail=SIZE means the range of last SIZE bytes "
"of\n"
"                              each file. SIZE can include K or M(1K = 1024, "
"1M =\n"
"                              1024K). If SIZE is omitted, SIZE=1M is used."

#: src/usage_text.h:594
msgid ""
" --interface=INTERFACE        Bind sockets to given interface. You can "
"specify\n"
"                              interface name, IP address and hostname."
msgstr ""
" --interface=INTERFACE        Bind sockets to given interface. You can "
"specify\n"
"                              interface name, IP address and hostname."

#: src/usage_text.h:597
msgid " --disable-ipv6[=true|false]  Disable IPv6."
msgstr " --disable-ipv6[=true|false]  Disable IPv6."

#: src/usage_text.h:599
msgid ""
" --bt-save-metadata[=true|false] Save metadata as .torrent file. This option "
"has\n"
"                              effect only when BitTorrent Magnet URI is "
"used.\n"
"                              The filename is hex encoded info hash with "
"suffix\n"
"                              .torrent. The directory to be saved is the "
"same\n"
"                              directory where download file is saved. If "
"the\n"
"                              same file already exists, metadata is not "
"saved.\n"
"                              See also --bt-metadata-only option."
msgstr ""
" --bt-save-metadata[=true|false] Save metadata as .torrent file. This option "
"has\n"
"                              effect only when BitTorrent Magnet URI is "
"used.\n"
"                              The filename is hex encoded info hash with "
"suffix\n"
"                              .torrent. The directory to be saved is the "
"same\n"
"                              directory where download file is saved. If "
"the\n"
"                              same file already exists, metadata is not "
"saved.\n"
"                              See also --bt-metadata-only option."

#: src/usage_text.h:607
msgid ""
" --http-no-cache[=true|false] Send Cache-Control: no-cache and Pragma: no-"
"cache\n"
"                              header to avoid cached content.  If false is\n"
"                              given, these headers are not sent and you can "
"add\n"
"                              Cache-Control header with a directive you "
"like\n"
"                              using --header option."
msgstr ""
" --http-no-cache[=true|false] Send Cache-Control: no-cache and Pragma: no-"
"cache\n"
"                              header to avoid cached content.  If false is\n"
"                              given, these headers are not sent and you can "
"add\n"
"                              Cache-Control header with a directive you "
"like\n"
"                              using --header option."

#: src/usage_text.h:613
msgid ""
" --bt-metadata-only[=true|false] Download metadata only. The file(s) "
"described\n"
"                              in metadata will not be downloaded. This "
"option\n"
"                              has effect only when BitTorrent Magnet URI is\n"
"                              used. See also --bt-save-metadata option."
msgstr ""
" --bt-metadata-only[=true|false] Download metadata only. The file(s) "
"described\n"
"                              in metadata will not be downloaded. This "
"option\n"
"                              has effect only when BitTorrent Magnet URI is\n"
"                              used. See also --bt-save-metadata option."

#: src/usage_text.h:618
msgid ""
" --human-readable[=true|false] Print sizes and speed in human readable "
"format\n"
"                              (e.g., 1.2Ki, 3.4Mi) in the console readout."
msgstr ""
" --human-readable[=true|false] Print sizes and speed in human readable "
"format\n"
"                              (e.g., 1.2Ki, 3.4Mi) in the console readout."

#: src/usage_text.h:621
msgid " --bt-enable-lpd[=true|false] Enable Local Peer Discovery."
msgstr " --bt-enable-lpd[=true|false] Enable Local Peer Discovery."

#: src/usage_text.h:623
msgid ""
" --bt-lpd-interface=INTERFACE Use given interface for Local Peer Discovery. "
"If\n"
"                              this option is not specified, the default\n"
"                              interface is chosen. You can specify "
"interface\n"
"                              name and IP address."
msgstr ""
" --bt-lpd-interface=INTERFACE Use given interface for Local Peer Discovery. "
"If\n"
"                              this option is not specified, the default\n"
"                              interface is chosen. You can specify "
"interface\n"
"                              name and IP address."

#: src/usage_text.h:628
msgid ""
" --reuse-uri[=true|false]     Reuse already used URIs if no unused URIs are\n"
"                              left."
msgstr ""
" --reuse-uri[=true|false]     Reuse already used URIs if no unused URIs are\n"
"                              left."

#: src/usage_text.h:631
msgid " --all-proxy-user=USER        Set user for --all-proxy option."
msgstr " --all-proxy-user=USER        Set user for --all-proxy option."

#: src/usage_text.h:633
msgid " --all-proxy-passwd=PASSWD    Set password for --all-proxy option."
msgstr " --all-proxy-passwd=PASSWD    Set password for --all-proxy option."

#: src/usage_text.h:635
msgid " --http-proxy-user=USER       Set user for --http-proxy option."
msgstr " --http-proxy-user=USER       Set user for --http-proxy option."

#: src/usage_text.h:637
msgid " --http-proxy-passwd=PASSWD   Set password for --http-proxy option."
msgstr " --http-proxy-passwd=PASSWD   Set password for --http-proxy option."

#: src/usage_text.h:639
msgid " --https-proxy-user=USER      Set user for --https-proxy option."
msgstr " --https-proxy-user=USER      Set user for --https-proxy option."

#: src/usage_text.h:641
msgid " --https-proxy-passwd=PASSWD  Set password for --https-proxy option."
msgstr " --https-proxy-passwd=PASSWD  Set password for --https-proxy option."

#: src/usage_text.h:643
msgid " --ftp-proxy-user=USER        Set user for --ftp-proxy option."
msgstr " --ftp-proxy-user=USER        Set user for --ftp-proxy option."

#: src/usage_text.h:645
msgid " --ftp-proxy-passwd=PASSWD    Set password for --ftp-proxy option."
msgstr " --ftp-proxy-passwd=PASSWD    Set password for --ftp-proxy option."

#: src/usage_text.h:647
msgid ""
" --remove-control-file[=true|false] Remove control file before download. "
"Using\n"
"                              with --allow-overwrite=true, download always\n"
"                              starts from scratch. This will be useful for\n"
"                              users behind proxy server which disables "
"resume."
msgstr ""
" --remove-control-file[=true|false] Remove control file before download. "
"Using\n"
"                              with --allow-overwrite=true, download always\n"
"                              starts from scratch. This will be useful for\n"
"                              users behind proxy server which disables "
"resume."

#: src/usage_text.h:652
msgid ""
" --always-resume[=true|false] Always resume download. If true is given, "
"aria2\n"
"                              always tries to resume download and if resume "
"is\n"
"                              not possible, aborts download. If false is "
"given,\n"
"                              when all given URIs do not support resume or\n"
"                              aria2 encounters N URIs which does not "
"support\n"
"                              resume (N is the value specified using\n"
"                              --max-resume-failure-tries option), aria2\n"
"                              downloads file from scratch.\n"
"                              See --max-resume-failure-tries option."
msgstr ""
" --always-resume[=true|false] Always resume download. If true is given, "
"aria2\n"
"                              always tries to resume download and if resume "
"is\n"
"                              not possible, aborts download. If false is "
"given,\n"
"                              when all given URIs do not support resume or\n"
"                              aria2 encounters N URIs which does not "
"support\n"
"                              resume (N is the value specified using\n"
"                              --max-resume-failure-tries option), aria2\n"
"                              downloads file from scratch.\n"
"                              See --max-resume-failure-tries option."

#: src/usage_text.h:662
msgid ""
" --max-resume-failure-tries=N When used with --always-resume=false, aria2\n"
"                              downloads file from scratch when aria2 detects "
"N\n"
"                              number of URIs that does not support resume. "
"If N\n"
"                              is 0, aria2 downloads file from scratch when "
"all\n"
"                              given URIs do not support resume.\n"
"                              See --always-resume option."
msgstr ""
" --max-resume-failure-tries=N When used with --always-resume=false, aria2\n"
"                              downloads file from scratch when aria2 detects "
"N\n"
"                              number of URIs that does not support resume. "
"If N\n"
"                              is 0, aria2 downloads file from scratch when "
"all\n"
"                              given URIs do not support resume.\n"
"                              See --always-resume option."

#: src/usage_text.h:669
msgid " --bt-tracker-timeout=SEC     Set timeout in seconds."
msgstr " --bt-tracker-timeout=SEC     Set timeout in seconds."

#: src/usage_text.h:671
msgid ""
" --bt-tracker-connect-timeout=SEC Set the connect timeout in seconds to\n"
"                              establish connection to tracker. After the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --bt-tracker-timeout option is "
"used\n"
"                              instead."
msgstr ""
" --bt-tracker-connect-timeout=SEC Set the connect timeout in seconds to\n"
"                              establish connection to tracker. After the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --bt-tracker-timeout option is "
"used\n"
"                              instead."

#: src/usage_text.h:677
msgid " --dht-message-timeout=SEC    Set timeout in seconds."
msgstr " --dht-message-timeout=SEC    Set timeout in seconds."

#: src/usage_text.h:679
msgid ""
" --http-accept-gzip[=true|false] Send 'Accept: deflate, gzip' request "
"header\n"
"                              and inflate response if remote server "
"responds\n"
"                              with 'Content-Encoding: gzip' or\n"
"                              'Content-Encoding: deflate'."
msgstr ""
" --http-accept-gzip[=true|false] Send ‘Accept: deflate, gzip’ request "
"header\n"
"                              and inflate response if remote server "
"responds\n"
"                              with ‘Content-Encoding: gzip’ or\n"
"                              'Content-Encoding: deflate'."

#: src/usage_text.h:684
msgid ""
" --save-session=FILE          Save error/unfinished downloads to FILE on "
"exit.\n"
"                              You can pass this output file to aria2c with -"
"i\n"
"                              option on restart. Please note that downloads\n"
"                              added by aria2.addTorrent and aria2."
"addMetalink\n"
"                              XML-RPC method are not saved."
msgstr ""
" --save-session=FILE          Save error/unfinished downloads to FILE on "
"exit.\n"
"                              You can pass this output file to aria2c with -"
"i\n"
"                              option on restart. Please note that downloads\n"
"                              added by aria2.addTorrent and aria2."
"addMetalink\n"
"                              XML-RPC method are not saved."

#: src/usage_text.h:690
msgid ""
" -x, --max-connection-per-server=NUM The maximum number of connections to "
"one\n"
"                              server for each download."
msgstr ""
" -x, --max-connection-per-server=NUM The maximum number of connections to "
"one\n"
"                              server for each download."

#: src/usage_text.h:693
msgid ""
" -k, --min-split-size=SIZE    aria2 does not split less than 2*SIZE byte "
"range.\n"
"                              For example, let's consider downloading 20MiB\n"
"                              file. If SIZE is 10M, aria2 can split file "
"into 2\n"
"                              range [0-10MiB) and [10MiB-20MiB) and download "
"it\n"
"                              using 2 sources(if --split >= 2, of course).\n"
"                              If SIZE is 15M, since 2*15M > 20MiB, aria2 "
"does\n"
"                              not split file and download it using 1 "
"source.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" -k, --min-split-size=SIZE    aria2 does not split less than 2*SIZE byte "
"range.\n"
"                              For example, let's consider downloading 20MiB\n"
"                              file. If SIZE is 10M, aria2 can split file "
"into 2\n"
"                              range [0-10MiB) and [10MiB-20MiB) and download "
"it\n"
"                              using 2 sources(if --split >= 2, of course).\n"
"                              If SIZE is 15M, since 2*15M > 20MiB, aria2 "
"does\n"
"                              not split file and download it using 1 "
"source.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."

#: src/usage_text.h:702
msgid ""
" --conditional-get[=true|false] Download file only when the local file is "
"older\n"
"                              than remote file. Currently, this function "
"has\n"
"                              many limitations. See man page for details."
msgstr ""
" --conditional-get[=true|false] Download file only when the local file is "
"older\n"
"                              than remote file. Currently, this function "
"has\n"
"                              many limitations. See man page for details."

#: src/usage_text.h:706
msgid ""
" --on-bt-download-complete=COMMAND For BitTorrent, a command specified in\n"
"                              --on-download-complete is called when "
"download\n"
"                              completes and seeding is over. On the other "
"hand,\n"
"                              this option sets the command to be executed "
"when\n"
"                              download completes but before seeding.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""
" --on-bt-download-complete=COMMAND For BitTorrent, a command specified in\n"
"                              --on-download-complete is called when "
"download\n"
"                              completes and seeding is over. On the other "
"hand,\n"
"                              this option sets the command to be executed "
"when\n"
"                              download completes but before seeding.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."

#: src/usage_text.h:714
msgid ""
" --enable-async-dns6[=true|false] Enable IPv6 name resolution in "
"asynchronous\n"
"                              DNS resolver. This option will be ignored "
"when\n"
"                              --async-dns=false."
msgstr ""
" --enable-async-dns6[=true|false] Enable IPv6 name resolution in "
"asynchronous\n"
"                              DNS resolver. This option will be ignored "
"when\n"
"                              --async-dns=false."

#: src/usage_text.h:718
msgid ""
" --enable-dht6[=true|false]   Enable IPv6 DHT functionality.\n"
"                              Use --dht-listen-port option to specify port\n"
"                              number to listen on. See also --dht-listen-"
"addr6\n"
"                              option."
msgstr ""
" --enable-dht6[=true|false]   Enable IPv6 DHT functionality.\n"
"                              Use --dht-listen-port option to specify port\n"
"                              number to listen on. See also --dht-listen-"
"addr6\n"
"                              option."

#: src/usage_text.h:723
msgid ""
" --dht-listen-addr6=ADDR      Specify address to bind socket for IPv6 DHT. \n"
"                              It should be a global unicast IPv6 address of "
"the\n"
"                              host."
msgstr ""
" --dht-listen-addr6=ADDR      Specify address to bind socket for IPv6 DHT. \n"
"                              It should be a global unicast IPv6 address of "
"the\n"
"                              host."

#: src/usage_text.h:727
msgid ""
" --dht-entry-point6=HOST:PORT Set host and port as an entry point to IPv6 "
"DHT\n"
"                              network."
msgstr ""
" --dht-entry-point6=HOST:PORT Set host and port as an entry point to IPv6 "
"DHT\n"
"                              network."

#: src/usage_text.h:730
msgid ""
" --dht-file-path6=PATH        Change the IPv6 DHT routing table file to PATH."
msgstr ""
" --dht-file-path6=PATH        Change the IPv6 DHT routing table file to PATH."

#: src/usage_text.h:732
msgid ""
" --bt-tracker=URI[,...]       Comma separated list of additional BitTorrent\n"
"                              tracker's announce URI. These URIs are not\n"
"                              affected by --bt-exclude-tracker option "
"because\n"
"                              they are added after URIs in --bt-exclude-"
"tracker\n"
"                              option are removed."
msgstr ""
" --bt-tracker=URI[,...]       Comma separated list of additional BitTorrent\n"
"                              tracker's announce URI. These URIs are not\n"
"                              affected by --bt-exclude-tracker option "
"because\n"
"                              they are added after URIs in --bt-exclude-"
"tracker\n"
"                              option are removed."

#: src/usage_text.h:738
msgid ""
" --bt-exclude-tracker=URI[,...] Comma separated list of BitTorrent "
"tracker's\n"
"                              announce URI to remove. You can use special "
"value\n"
"                              '*' which matches all URIs, thus removes all\n"
"                              announce URIs. When specifying '*' in shell\n"
"                              command-line, don't forget to escape or quote "
"it.\n"
"                              See also --bt-tracker option."
msgstr ""
" --bt-exclude-tracker=URI[,...] Comma separated list of BitTorrent "
"tracker's\n"
"                              announce URI to remove. You can use special "
"value\n"
"                              ‘*’ which matches all URIs, thus removes "
"all\n"
"                              announce URIs. When specifying ‘*’ in "
"shell\n"
"                              command-line, don't forget to escape or quote "
"it.\n"
"                              See also --bt-tracker option."

#: src/usage_text.h:745
msgid ""
" --max-download-result=NUM    Set maximum number of download result kept in\n"
"                              memory. The download results are completed/"
"error/\n"
"                              removed downloads. The download results are "
"stored\n"
"                              in FIFO queue and it can store at most NUM\n"
"                              download results. When queue is full and new\n"
"                              download result is created, oldest download "
"result\n"
"                              is removed from the front of the queue and new "
"one\n"
"                              is pushed to the back. Setting big number in "
"this\n"
"                              option may result high memory consumption "
"after\n"
"                              thousands of downloads. Specifying 0 means no\n"
"                              download result is kept."
msgstr ""
" --max-download-result=NUM    Set maximum number of download result kept in\n"
"                              memory. The download results are completed/"
"error/\n"
"                              removed downloads. The download results are "
"stored\n"
"                              in FIFO queue and it can store at most NUM\n"
"                              download results. When queue is full and new\n"
"                              download result is created, oldest download "
"result\n"
"                              is removed from the front of the queue and new "
"one\n"
"                              is pushed to the back. Setting big number in "
"this\n"
"                              option may result high memory consumption "
"after\n"
"                              thousands of downloads. Specifying 0 means no\n"
"                              download result is kept."

#: src/version_usage.cc:57
msgid " version "
msgstr " version "

#: src/version_usage.cc:80
#, c-format
msgid "Report bugs to %s"
msgstr "Report bugs to %s"

#: src/version_usage.cc:85
msgid ""
"Usage: aria2c [OPTIONS] [URI | MAGNET | TORRENT_FILE | METALINK_FILE]..."
msgstr ""
"Usage: aria2c [OPTIONS] [URI | MAGNET | TORRENT_FILE | METALINK_FILE]..."

#: src/version_usage.cc:92
msgid "Printing all options."
msgstr "Printing all options."

#: src/version_usage.cc:94
#, c-format
msgid "Printing options tagged with '%s'."
msgstr "Printing options tagged with '%s'."

#: src/version_usage.cc:98
#, c-format
msgid "See -h option to know other command-line options(%s)."
msgstr "See -h option to know other command-line options(%s)."

#: src/version_usage.cc:103 src/version_usage.cc:115
msgid "Options:"
msgstr "Options:"

#: src/version_usage.cc:112
#, c-format
msgid "Printing options whose name includes '%s'."
msgstr "Printing options whose name includes '%s'."

#: src/version_usage.cc:120
#, c-format
msgid "No option matching with '%s'."
msgstr "No option matching with '%s'."

#: src/version_usage.cc:128
msgid ""
" You can specify multiple HTTP(S)/FTP URIs. Unless you specify -Z option, "
"all\n"
" URIs must point to the same file or downloading will fail."
msgstr ""
" You can specify multiple HTTP(S)/FTP URIs. Unless you specify -Z option, "
"all\n"
" URIs must point to the same file or downloading will fail."

#: src/version_usage.cc:130
msgid ""
" You can also specify arbitrary number of BitTorrent Magnet URIs, torrent/\n"
" metalink files stored in a local drive. Please note that they are always\n"
" treated as a separate download."
msgstr ""
" You can also specify arbitrary number of BitTorrent Magnet URIs, torrent/\n"
" metalink files stored in a local drive. Please note that they are always\n"
" treated as a separate download."

#: src/version_usage.cc:135
msgid ""
" You can specify both torrent file with -T option and URIs. By doing this,\n"
" download a file from both torrent swarm and HTTP/FTP server at the same "
"time,\n"
" while the data from HTTP/FTP are uploaded to the torrent swarm. For single "
"file\n"
" torrents, URI can be a complete URI pointing to the resource or if URI "
"ends\n"
" with '/', 'name' in torrent file is added. For multi-file torrents, 'name' "
"and\n"
" 'path' in torrent are added to form a URI for each file."
msgstr ""
" You can specify both torrent file with -T option and URIs. By doing this,\n"
" download a file from both torrent swarm and HTTP/FTP server at the same "
"time,\n"
" while the data from HTTP/FTP are uploaded to the torrent swarm. For single "
"file\n"
" torrents, URI can be a complete URI pointing to the resource or if URI "
"ends\n"
" with '/', ‘name’ in torrent file is added. For multi-file torrents, "
"‘name’ and\n"
" ‘path’ in torrent are added to form a URI for each file."

#: src/version_usage.cc:142
msgid ""
" Make sure that URI is quoted with single(') or double(\") quotation if it\n"
" contains \"&\" or any characters that have special meaning in shell."
msgstr ""
" Make sure that URI is quoted with single(') or double(\") quotation if it\n"
" contains “&” or any characters that have special meaning in shell."

#: src/version_usage.cc:152
msgid "Refer to man page for more information."
msgstr "Refer to man page for more information."

#: src/message.h:57
#, c-format
msgid "GID#%s - Download has already completed: %s"
msgstr "GID#%s - Download has already completed: %s"

#: src/message.h:106
#, c-format
msgid "Unrecognized URI or unsupported protocol: %s"
msgstr "Unrecognized URI or unsupported protocol: %s"

#: src/message.h:107
#, c-format
msgid "Tracker returned warning message: %s"
msgstr "Tracker returned warning message: %s"

#: src/message.h:108
#, c-format
msgid "The segment file %s exists."
msgstr "The segment file %s exists."

#: src/message.h:109
#, c-format
msgid "The segment file %s does not exist."
msgstr "The segment file %s does not exist."

#: src/message.h:110
#, c-format
msgid "Saving the segment file %s"
msgstr "Saving the segment file %s"

#: src/message.h:111
msgid "The segment file was saved successfully."
msgstr "The segment file was saved successfully."

#: src/message.h:112
#, c-format
msgid "Loading the segment file %s."
msgstr "Loading the segment file %s."

#: src/message.h:113
msgid "The segment file was loaded successfully."
msgstr "The segment file was loaded successfully."

#: src/message.h:114
msgid "No URI to download. Download aborted."
msgstr "No URI to download. Download aborted."

#: src/message.h:115
#, c-format
msgid ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."
msgstr ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."

#: src/message.h:116
#, c-format
msgid "Allocating file %s, %s bytes"
msgstr "Allocating file %s, %s bytes"

#: src/message.h:117
msgid "File not found"
msgstr "File not found"

#: src/message.h:118
msgid "Not a directory"
msgstr "Not a directory"

#: src/message.h:119
#, c-format
msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d"
msgstr "Insufficient checksums. checksumLength=%d, numChecksum=%d"

#: src/message.h:120
#, c-format
msgid "Writing file %s"
msgstr "Writing file %s"

#: src/message.h:121
msgid "No peer list received."
msgstr "No peer list received."

#: src/message.h:122
#, c-format
msgid "Adding peer %s:%d"
msgstr "Adding peer %s:%d"

#: src/message.h:123
#, c-format
msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d"
msgstr "Deleting used piece index=%d, fillRate(%%)=%d<=%d"

#: src/message.h:124
msgid "Download of selected files was complete."
msgstr "Download of selected files was complete."

#: src/message.h:125
msgid "The download was complete."
msgstr "The download was complete."

#: src/message.h:126
#, c-format
msgid "Removed %lu have entries."
msgstr "Removed %lu have entries."

#: src/message.h:127
#, c-format
msgid "Validating file %s"
msgstr "Validating file %s"

#: src/message.h:128
#, c-format
msgid "%ld seconds to allocate %s byte(s)"
msgstr "%ld seconds to allocate %s byte(s)"

#: src/message.h:131
#, c-format
msgid "Metalink: Queueing %s for download."
msgstr "Metalink: Queueing %s for download."

#: src/message.h:132
#, c-format
msgid "Download complete: %s"
msgstr "Download complete: %s"

#: src/message.h:133
msgid "Seeding is over."
msgstr "Seeding is over."

#: src/message.h:134
msgid "No chunk to verify."
msgstr "No chunk to verify."

#: src/message.h:135
#, c-format
msgid "Good chunk checksum. hash=%s"
msgstr "Good chunk checksum. hash=%s"

#: src/message.h:136
#, c-format
msgid "Failed to load cookies from %s"
msgstr "Failed to load cookies from %s"

#: src/message.h:137
#, c-format
msgid ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."
msgstr ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."

#: src/message.h:138
msgid "Logging started."
msgstr "Logging started."

#: src/message.h:139
msgid "Specify at least one URL."
msgstr "Specify at least one URL."

#: src/message.h:140
msgid "daemon failed."
msgstr "daemon failed."

#: src/message.h:141
#, c-format
msgid "Verification finished successfully. file=%s"
msgstr "Verification finished successfully. file=%s"

#: src/message.h:142
#, c-format
msgid "Checksum error detected. file=%s"
msgstr "Checksum error detected. file=%s"

#: src/message.h:143
#, c-format
msgid "Incomplete range specified. %s"
msgstr "Incomplete range specified. %s"

#: src/message.h:144
#, c-format
msgid "Failed to convert string into value: %s"
msgstr "Failed to convert string into value: %s"

#: src/message.h:145
msgid "Resource not found"
msgstr "Resource not found"

#: src/message.h:146
#, c-format
msgid "File already exists. Renamed to %s."
msgstr "File already exists. Renamed to %s."

#: src/message.h:147
msgid "Cannot parse metalink XML file. XML may be malformed."
msgstr "Cannot parse metalink XML file. XML may be malformed."

#: src/message.h:148
#, c-format
msgid "Too small payload size for %s, size=%lu."
msgstr "Too small payload size for %s, size=%lu."

#: src/message.h:149
#, c-format
msgid ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."
msgstr ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."

#: src/message.h:150
#, c-format
msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"
msgstr "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"

#: src/message.h:151
#, c-format
msgid "Missing %s in torrent metainfo."
msgstr "Missing %s in torrent metainfo."

#: src/message.h:152
msgid "Tracker returned null data."
msgstr "Tracker returned null data."

#: src/message.h:153
msgid "Windows socket library initialization failed"
msgstr "Windows socket library initialization failed"

#: src/message.h:154
#, c-format
msgid "%ld second(s) has passed. Stopping application."
msgstr "%ld second(s) has passed. Stopping application."

#: src/message.h:155
#, c-format
msgid ""
"Saved signature as %s. Please note that aria2 doesn't verify signatures."
msgstr ""
"Saved signature as %s. Please note that aria2 doesn't verify signatures."

#: src/message.h:157
#, c-format
msgid "Saving signature as %s failed. Maybe file already exists."
msgstr "Saving signature as %s failed. Maybe file already exists."

#: src/message.h:160
#, c-format
msgid "Failed to open ServerStat file %s for read."
msgstr "Failed to open ServerStat file %s for read."

#: src/message.h:161
#, c-format
msgid "ServerStat file %s loaded successfully."
msgstr "ServerStat file %s loaded successfully."

#: src/message.h:162
#, c-format
msgid "Failed to read ServerStat from %s."
msgstr "Failed to read ServerStat from %s."

#: src/message.h:165
#, c-format
msgid "Failed to open ServerStat file %s for write."
msgstr "Failed to open ServerStat file %s for write."

#: src/message.h:166
#, c-format
msgid "ServerStat file %s saved successfully."
msgstr "ServerStat file %s saved successfully."

#: src/message.h:167
#, c-format
msgid "Failed to write ServerStat to %s."
msgstr "Failed to write ServerStat to %s."

#: src/message.h:170
#, c-format
msgid "Failed to establish connection, cause: %s"
msgstr "Failed to establish connection, cause: %s"

#: src/message.h:171
#, c-format
msgid "Network problem has occurred. cause:%s"
msgstr "Network problem has occurred. cause:%s"

#: src/message.h:173
#, c-format
msgid "Failed to load trusted CA certificates from %s. Cause: %s"
msgstr "Failed to load trusted CA certificates from %s. Cause: %s"

#: src/message.h:175
#, c-format
msgid ""
"Certificate verification failed. Cause: %s See --ca-certificate and --check-"
"certificate option."
msgstr ""
"Certificate verification failed. Cause: %s See --ca-certificate and --check-"
"certificate option."

#: src/message.h:177
msgid "No certificate found."
msgstr "No certificate found."

#: src/message.h:178
msgid "Hostname not match."
msgstr "Hostname not match."

#: src/message.h:179
msgid "No files to download."
msgstr "No files to download."

#: src/message.h:181
msgid ""
"You may encounter the certificate verification error with HTTPS server. See "
"--ca-certificate and --check-certificate option."
msgstr ""
"You may encounter the certificate verification error with HTTPS server. See "
"--ca-certificate and --check-certificate option."

#: src/message.h:183
#, c-format
msgid "Printing the contents of file '%s'..."
msgstr "Printing the contents of file '%s'..."

#: src/message.h:184
msgid "This file is neither Torrent nor Metalink file. Skipping."
msgstr "This file is neither Torrent nor Metalink file. Skipping."

#: src/message.h:189
#, c-format
msgid "Is '%s' a file?"
msgstr "Is ‘%s’ a file?"

#: src/message.h:190
#, c-format
msgid "Failed to find given interface %s, cause: %s"
msgstr "Failed to find given interface %s, cause: %s"

#: src/message.h:192
#, c-format
msgid "Saved metadata as %s."
msgstr "Saved metadata as %s."

#: src/message.h:193
#, c-format
msgid "Saving metadata as %s failed. Maybe file already exists."
msgstr "Saving metadata as %s failed. Maybe file already exists."

#: src/message.h:195
#, c-format
msgid "Detected directory traversal directive in %s"
msgstr "Detected directory traversal directive in %s"

#: src/message.h:199
msgid "Timeout."
msgstr "Timeout."

#: src/message.h:200
msgid "Invalid chunk size."
msgstr "Invalid chunk size."

#: src/message.h:201
#, c-format
msgid "Too large chunk. size=%d"
msgstr "Too large chunk. size=%d"

#: src/message.h:202
msgid "Invalid header."
msgstr "Invalid header."

#: src/message.h:203
msgid "Invalid response."
msgstr "Invalid response."

#: src/message.h:204
msgid "No header found."
msgstr "No header found."

#: src/message.h:205
msgid "No status header."
msgstr "No status header."

#: src/message.h:206
msgid "Proxy connection failed."
msgstr "Proxy connection failed."

#: src/message.h:207
msgid "Connection failed."
msgstr "Connection failed."

#: src/message.h:208
#, c-format
msgid ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"
msgstr ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"

#: src/message.h:209
#, c-format
msgid "The response status is not successful. status=%d"
msgstr "The response status is not successful. status=%d"

#: src/message.h:210
#, c-format
msgid "Too large file size. size=%s"
msgstr "Too large file size. size=%s"

#: src/message.h:211
#, c-format
msgid "Transfer encoding %s is not supported."
msgstr "Transfer encoding %s is not supported."

#: src/message.h:212
#, c-format
msgid "SSL initialization failed: %s"
msgstr "SSL initialization failed: %s"

#: src/message.h:213
msgid "SSL I/O error"
msgstr "SSL I/O error"

#: src/message.h:214
msgid "SSL protocol error"
msgstr "SSL protocol error"

#: src/message.h:215
#, c-format
msgid "SSL unknown error %d"
msgstr "SSL unknown error %d"

#: src/message.h:216
#, c-format
msgid "SSL initialization failed: OpenSSL connect error %d"
msgstr "SSL initialization failed: OpenSSL connect error %d"

#: src/message.h:217
#, c-format
msgid "Size mismatch Expected:%s Actual:%s"
msgstr "Size mismatch Expected:%s Actual:%s"

#: src/message.h:218
msgid "Authorization failed."
msgstr "Authorization failed."

#: src/message.h:219
msgid "Got EOF from the server."
msgstr "Got EOF from the server."

#: src/message.h:220
msgid "Got EOF from peer."
msgstr "Got EOF from peer."

#: src/message.h:221
msgid "Malformed meta info."
msgstr "Malformed meta info."

#: src/message.h:223
#, c-format
msgid "Failed to open the file %s, cause: %s"
msgstr "Failed to open the file %s, cause: %s"

#: src/message.h:224
#, c-format
msgid "Failed to write into the file %s, cause: %s"
msgstr "Failed to write into the file %s, cause: %s"

#: src/message.h:225
#, c-format
msgid "Failed to read from the file %s, cause: %s"
msgstr "Failed to read from the file %s, cause: %s"

#: src/message.h:226
msgid "Failed to read data from disk."
msgstr "Failed to read data from disk."

#: src/message.h:227
#, c-format
msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"
msgstr "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"

#: src/message.h:228
#, c-format
msgid "Failed to seek the file %s, cause: %s"
msgstr "Failed to seek the file %s, cause: %s"

#: src/message.h:229
#, c-format
msgid "The offset is out of range, offset=%s"
msgstr "The offset is out of range, offset=%s"

#: src/message.h:230
#, c-format
msgid "%s is not a directory."
msgstr "%s is not a directory."

#: src/message.h:231
#, c-format
msgid "Failed to make the directory %s, cause: %s"
msgstr "Failed to make the directory %s, cause: %s"

#: src/message.h:232
#, c-format
msgid "Failed to open the segment file %s, cause: %s"
msgstr "Failed to open the segment file %s, cause: %s"

#: src/message.h:233
#, c-format
msgid "Failed to write into the segment file %s, cause: %s"
msgstr "Failed to write into the segment file %s, cause: %s"

#: src/message.h:234
#, c-format
msgid "Failed to read from the segment file %s, cause: %s"
msgstr "Failed to read from the segment file %s, cause: %s"

#: src/message.h:236
#, c-format
msgid "Failed to open a socket, cause: %s"
msgstr "Failed to open a socket, cause: %s"

#: src/message.h:237
#, c-format
msgid "Failed to set a socket option, cause: %s"
msgstr "Failed to set a socket option, cause: %s"

#: src/message.h:238
#, c-format
msgid "Failed to set a socket as blocking, cause: %s"
msgstr "Failed to set a socket as blocking, cause: %s"

#: src/message.h:239
#, c-format
msgid "Failed to set a socket as non-blocking, cause: %s"
msgstr "Failed to set a socket as non-blocking, cause: %s"

#: src/message.h:240
#, c-format
msgid "Failed to bind a socket, cause: %s"
msgstr "Failed to bind a socket, cause: %s"

#: src/message.h:241
#, c-format
msgid "Failed to listen to a socket, cause: %s"
msgstr "Failed to listen to a socket, cause: %s"

#: src/message.h:242
#, c-format
msgid "Failed to accept a peer connection, cause: %s"
msgstr "Failed to accept a peer connection, cause: %s"

#: src/message.h:243
#, c-format
msgid "Failed to get the name of socket, cause: %s"
msgstr "Failed to get the name of socket, cause: %s"

#: src/message.h:244
#, c-format
msgid "Failed to get the name of connected peer, cause: %s"
msgstr "Failed to get the name of connected peer, cause: %s"

#: src/message.h:245
#, c-format
msgid "Failed to resolve the hostname %s, cause: %s"
msgstr "Failed to resolve the hostname %s, cause: %s"

#: src/message.h:246
#, c-format
msgid "Failed to connect to the host %s, cause: %s"
msgstr "Failed to connect to the host %s, cause: %s"

#: src/message.h:247
#, c-format
msgid "Failed to check whether the socket is writable, cause: %s"
msgstr "Failed to check whether the socket is writable, cause: %s"

#: src/message.h:248
#, c-format
msgid "Failed to check whether the socket is readable, cause: %s"
msgstr "Failed to check whether the socket is readable, cause: %s"

#: src/message.h:249
#, c-format
msgid "Failed to send data, cause: %s"
msgstr "Failed to send data, cause: %s"

#: src/message.h:250
#, c-format
msgid "Failed to receive data, cause: %s"
msgstr "Failed to receive data, cause: %s"

#: src/message.h:251
#, c-format
msgid "Failed to peek data, cause: %s"
msgstr "Failed to peek data, cause: %s"

#: src/message.h:252
#, c-format
msgid "Unknown socket error %d (0x%x)"
msgstr "Unknown socket error %d (0x%x)"

#: src/message.h:253
#, c-format
msgid "File %s exists, but %s does not exist."
msgstr "File %s exists, but %s does not exist."

#: src/message.h:255
#, c-format
msgid "Invalid payload size for %s, size=%lu. It should be %lu."
msgstr "Invalid payload size for %s, size=%lu. It should be %lu."

#: src/message.h:256
#, c-format
msgid "Invalid ID=%d for %s. It should be %d."
msgstr "Invalid ID=%d for %s. It should be %d."

#: src/message.h:257
#, c-format
msgid ""
"Chunk checksum validation failed. checksumIndex=%lu, offset=%s, expectedHash="
"%s, actualHash=%s"
msgstr ""
"Chunk checksum validation failed. checksumIndex=%lu, offset=%s, expectedHash="
"%s, actualHash=%s"

#: src/message.h:258
msgid "Download aborted."
msgstr "Download aborted."

#: src/message.h:259
#, c-format
msgid "File %s is being downloaded by other command."
msgstr "File %s is being downloaded by other command."

#: src/message.h:260
msgid "Insufficient checksums."
msgstr "Insufficient checksums."

#: src/message.h:261
#, c-format
msgid "Tracker returned failure reason: %s"
msgstr "Tracker returned failure reason: %s"

#: src/message.h:262
msgid "Flooding detected."
msgstr "Flooding detected."

#: src/message.h:264
#, c-format
msgid ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%ld seconds)."
msgstr ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%ld seconds)."

#: src/message.h:266
msgid "The infoHash in torrent file doesn't match to one in .aria2 file."
msgstr "The infoHash in torrent file doesn't match to one in .aria2 file."

#: src/message.h:267
#, c-format
msgid "No such file entry %s"
msgstr "No such file entry %s"

#: src/message.h:268
#, c-format
msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s"
msgstr "Too slow Downloading speed: %d <= %d(B/s), host:%s"

#: src/message.h:269
msgid "No HttpRequestEntry found."
msgstr "No HttpRequestEntry found."

#: src/message.h:270
#, c-format
msgid "Got %d status, but no location header provided."
msgstr "Got %d status, but no location header provided."

#: src/message.h:271
#, c-format
msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"
msgstr "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"

#: src/message.h:272
msgid "No file matched with your preference."
msgstr "No file matched with your preference."

#: src/message.h:273
msgid "Exception caught"
msgstr "Exception caught"

#: src/message.h:274
#, c-format
msgid "Max payload length exceeded or invalid. length = %u"
msgstr "Max payload length exceeded or invalid. length = %u"

#: src/message.h:275
#, c-format
msgid "Invalid file length. Cannot continue download %s: local %s, remote %s"
msgstr "Invalid file length. Cannot continue download %s: local %s, remote %s"

#: src/BtSetup.cc:212
msgid "Errors occurred while binding port.\n"
msgstr "Errors occurred while binding port.\n"