aria2/po/zh_CN.po

# Simplified Chinese translation for aria2
# Copyright (c) 2007 Rosetta Contributors and Canonical Ltd 2007
# This file is distributed under the same license as the aria2 package.
# FIRST AUTHOR <EMAIL@ADDRESS>, 2007.
#
msgid ""
msgstr ""
"Project-Id-Version: aria2\n"
"Report-Msgid-Bugs-To: http://aria2.sourceforge.net/\n"
"POT-Creation-Date: 2010-11-01 20:48+0900\n"
"PO-Revision-Date: 2010-09-21 11:03+0000\n"
"Last-Translator: Iven Day <Unknown>\n"
"Language-Team: Simplified Chinese <zh_CN@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Launchpad-Export-Date: 2010-10-12 11:40+0000\n"
"X-Generator: Launchpad (build Unknown)\n"

#: src/DownloadEngine.cc:224
msgid ""
"Shutdown sequence commencing... Press Ctrl-C again for emergency shutdown."
msgstr "正在关闭程序... 紧急关闭请再按Ctrl-C"

#: src/DownloadEngine.cc:231
msgid "Emergency shutdown sequence commencing..."
msgstr "紧急关闭程序..."

#: src/MultiUrlRequestInfo.cc:114
msgid "aria2 will resume download if the transfer is restarted."
msgstr "重新启动aria2，自动继续下载文件"

#: src/MultiUrlRequestInfo.cc:116
msgid ""
"If there are any errors, then see the log file. See '-l' option in help/man "
"page for details."
msgstr ""
"如果发生任何错误，请参阅日志文件。要了解详细信息，请在help/man页面中参阅'-"
"l'选项。"

#: src/RequestGroupMan.cc:609
msgid "Download Results:"
msgstr "下载结果："

#: src/RequestGroupMan.cc:669
msgid "Status Legend:"
msgstr "状态标识："

#: src/OptionHandler.cc:38
msgid "                              Default: "
msgstr "                              默认： "

#: src/OptionHandler.cc:39
msgid "                              Tags: "
msgstr "                              标记： "

#: src/OptionHandler.cc:40
msgid "                              Possible Values: "
msgstr "                              可能的取值： "

#: src/OptionHandlerImpl.h:137
msgid "must be either 'true' or 'false'."
msgstr "必须为'true'或'false'."

#: src/OptionHandlerImpl.h:171 src/OptionHandlerImpl.h:220
#, c-format
msgid "must be between %s and %s."
msgstr "必须在%s和%s之间。"

#: src/OptionHandlerImpl.h:217
#, c-format
msgid "must be smaller than or equal to %s."
msgstr "必须小于或等于%s。"

#: src/OptionHandlerImpl.h:223
#, c-format
msgid "must be greater than or equal to %s."
msgstr "必须大于或等于%s。"

#: src/OptionHandlerImpl.h:226 src/OptionHandlerImpl.h:304
msgid "must be a number."
msgstr "必须是一个数字。"

#: src/OptionHandlerImpl.h:295
#, c-format
msgid "must be smaller than or equal to %.1f."
msgstr "必须小于或等于%.1f。"

#: src/OptionHandlerImpl.h:298
#, c-format
msgid "must be between %.1f and %.1f."
msgstr "必须在%.1f 和%.1f之间。"

#: src/OptionHandlerImpl.h:301
#, c-format
msgid "must be greater than or equal to %.1f."
msgstr "必须大于或等于%.1f。"

#: src/OptionHandlerImpl.h:479
msgid "must be one of the following:"
msgstr "必须是下列取值之一："

#: src/OptionHandlerImpl.h:529
msgid "Unrecognized format"
msgstr ""

#: src/OptionHandlerImpl.h:665
msgid "unrecognized proxy format"
msgstr "无法识别的代理格式"

#: src/usage_text.h:37
msgid ""
" -d, --dir=DIR                The directory to store the downloaded file."
msgstr " -d, --dir=DIR 用于存储已下载文件的目录。"

#: src/usage_text.h:39
msgid ""
" -o, --out=FILE               The file name of the downloaded file. When -Z\n"
"                              option is used, this option is ignored."
msgstr ""
" -o, --out=FILE 下载文件的文件名。当使用 -Z\n"
"                              选项时，此选项被忽略。"

#: src/usage_text.h:42
msgid ""
" -l, --log=LOG                The file name of the log file. If '-' is\n"
"                              specified, log is written to stdout."
msgstr ""
" -l, --log=LOG 日志文件名称。如果指定'-'，\n"
"                              日志将被写到标准输出（通常是显示器）。"

#: src/usage_text.h:45
msgid ""
" -D, --daemon                 Run as daemon. The current working directory "
"will\n"
"                              be changed to \"/\" and standard input, "
"standard\n"
"                              output and standard error will be redirected "
"to\n"
"                              \"/dev/null\"."
msgstr ""
" -D, --daemon 作为守护进程运行。当前工作目录将\n"
"                              被设定为\"/\"，而标准输入、标准\n"
"                              输出、标准错误输出将被重定向到\n"
"                              \"/dev/null\"。"

#: src/usage_text.h:50
msgid ""
" -s, --split=N                Download a file using N connections. If more\n"
"                              than N URLs are given, first N URLs are used "
"and\n"
"                              remaining URLs are used for backup. If less "
"than\n"
"                              N URLs are given, those URLs are used more "
"than\n"
"                              once so that N connections total are made\n"
"                              simultaneously. The number of connections to "
"the\n"
"                              same host is restricted by\n"
"                              --max-connection-per-server option. Please see "
"-j\n"
"                              and --min-split-size option too.\n"
"                              Please note that in Metalink download, this\n"
"                              option has no effect and use -C option instead."
msgstr ""
" -s, --split=N 使用N个连接下载文件。如果给定\n"
"                              多于N个URL，将使用前N个，而其他URL\n"
"                              备用。如果给定少于N个URL，这些URL\n"
"                              将被重复使用，以保证N个连接同时进\n"
"                              行。至同一主机的连接数被\n"
"                              --max-connection-per-server 选项所\n"
"                              限制。请同时参阅-j和--min-split-size\n"
"                              选项。请注意，对于Metalink下载，此\n"
"                              选项不起作用，请使用-C选项。"

#: src/usage_text.h:62
msgid ""
" --retry-wait=SEC             Set the seconds to wait to retry after an "
"error\n"
"                              has occured."
msgstr " --retry-wait=SEC 设置出错后等待的秒数。"

#: src/usage_text.h:65
msgid " -t, --timeout=SEC            Set timeout in seconds."
msgstr " -t, --timeout=SEC 设置超时（以秒计）。"

#: src/usage_text.h:67
msgid " -m, --max-tries=N            Set number of tries. 0 means unlimited."
msgstr " -m, --max-tries=N 设置重试次数。0意味着不限次数。"

#: src/usage_text.h:69
msgid ""
" --http-proxy=PROXY           Use this proxy server for HTTP. To erase\n"
"                              previously defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --http-proxy=PROXY 设置HTTP代理服务器。要覆盖\n"
"                              之前设置的代理，请使用\"\"。也请\n"
"                              参阅影响全部URL的--all-proxy选项。"

#: src/usage_text.h:74
msgid ""
" --https-proxy=PROXY          Use this proxy server for HTTPS. To erase\n"
"                              previously defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --https-proxy=PROXY 设置HTTPS代理服务器。要覆盖\n"
"                              之前设置的代理，请使用\"\"。也请\n"
"                              参阅影响全部URL的--all-proxy选项。"

#: src/usage_text.h:79
msgid ""
" --ftp-proxy=PROXY            Use this proxy server for FTP. To erase "
"previously\n"
"                              defined proxy, use \"\".\n"
"                              See also  --all-proxy option.\n"
"                              This affects all URLs."
msgstr ""
" --ftp-proxy=PROXY 设置FTP代理服务器。要覆盖\n"
"                              之前设置的代理，请使用\"\"。也请\n"
"                              参阅影响全部URL的--all-proxy选项。"

#: src/usage_text.h:84
msgid ""
" --all-proxy=PROXY            Use this proxy server for all protocols. To "
"erase\n"
"                              previously defined proxy, use \"\".\n"
"                              You can override this setting and specify a\n"
"                              proxy server for a particular protocol using\n"
"                              --http-proxy, --https-proxy and --ftp-proxy\n"
"                              options.\n"
"                              This affects all URLs."
msgstr ""
" --all-proxy=PROXY 设置所有协议的代理服务器。要覆盖\n"
"                              之前设置的代理，请使用\"\"。想覆盖此选项，\n"
"                              并设置指定协议的代理服务器，请使用\n"
"                              --http-proxy，--https-proxy和--ftp-proxy\n"
"                              选项。\n"
"                              此设置对所有链接有效。"

#: src/usage_text.h:92
msgid " --http-user=USER             Set HTTP user. This affects all URLs."
msgstr " --http-user=USER 设置HTTP用户。此设置对所有链接有效。"

#: src/usage_text.h:94
msgid " --http-passwd=PASSWD         Set HTTP password. This affects all URLs."
msgstr " --http-passwd=PASSWD 设置HTTP密码。此设置对所有链接有效。"

#: src/usage_text.h:96
msgid " --proxy-method=METHOD        Set the method to use in proxy request."
msgstr " --proxy-method=METHOD 设置使用在代理请求中的方法。"

#: src/usage_text.h:98
msgid " --referer=REFERER            Set Referer. This affects all URLs."
msgstr " --referer=REFERER 设置引用页，此设置对所有链接有效。"

#: src/usage_text.h:100
msgid " --ftp-user=USER              Set FTP user. This affects all URLs."
msgstr " --ftp-user=USER 设置FTP用户。此设置对所有链接有效。"

#: src/usage_text.h:102
msgid " --ftp-passwd=PASSWD          Set FTP password. This affects all URLs."
msgstr " --ftp-passwd=PASSWD 设置FTP密码。此设置对所有链接有效。"

#: src/usage_text.h:104
msgid " --ftp-type=TYPE              Set FTP transfer type."
msgstr " --ftp-type=TYPE 设置FTP传输类型。"

#: src/usage_text.h:106
msgid ""
" -p, --ftp-pasv[=true|false]  Use the passive mode in FTP. If false is "
"given,\n"
"                              the active mode will be used."
msgstr ""
" -p, --ftp-pasv[=true|false] 在FTP中使用被动模式。如果选择false，\n"
"                              将使用主动模式。"

#: src/usage_text.h:109
msgid ""
" --lowest-speed-limit=SPEED   Close connection if download speed is lower "
"than\n"
"                              or equal to this value(bytes per sec).\n"
"                              0 means aria2 does not have a lowest speed "
"limit.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              This option does not affect BitTorrent "
"downloads."
msgstr ""
" --lowest-speed-limit=SPEED 如果下载速度低于或等于此值（字节/秒），\n"
"                              则断开连接。0意味着aria2没有最\n"
"                              低速度限制。你可以使用K或M作为\n"
"                              后缀（1K=1024，1M=1024K）。\n"
"                              此选项对BT下载无效。"

#: src/usage_text.h:115
msgid ""
" --max-overall-download-limit=SPEED Set max overall download speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the download speed per download, use\n"
"                              --max-download-limit option."
msgstr ""
" --max-overall-download-limit=SPEED 设置最大总体下载速度，以b/秒计。\n"
"                              0意味着不限制。\n"
"                              您可以附加K或M(1K = 1024, 1M = 1024K)。\n"
"                              要限制每个下载的下载速度，请使用\n"
"                              --max-download-limit选项。"

#: src/usage_text.h:121
msgid ""
" --max-download-limit=SPEED   Set max download speed per each download in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall download speed, use\n"
"                              --max-overall-download-limit option."
msgstr ""

#: src/usage_text.h:127
msgid ""
" --file-allocation=METHOD     Specify file allocation method.\n"
"                              'none' doesn't pre-allocate file space. "
"'prealloc'\n"
"                              pre-allocates file space before download "
"begins.\n"
"                              This may take some time depending on the size "
"of\n"
"                              the file.\n"
"                              If you are using newer file systems such as "
"ext4\n"
"                              (with extents support), btrfs or xfs, 'falloc' "
"is\n"
"                              your best choice. It allocates large(few GiB)\n"
"                              files almost instantly. Don't use 'falloc' "
"with\n"
"                              legacy file systems such as ext3 because it "
"takes\n"
"                              almost same time as 'prealloc' and it blocks "
"aria2\n"
"                              entirely until allocation finishes. 'falloc' "
"may\n"
"                              not be available if your system doesn't have\n"
"                              posix_fallocate() function."
msgstr ""

#: src/usage_text.h:142
msgid ""
" --no-file-allocation-limit=SIZE No file allocation is made for files whose\n"
"                              size is smaller than SIZE.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --no-file-allocation-limit=SIZE 小于SIZE大小的文件\n"
"                              不预先分配文件空间。\n"
"                              您可以附加K或M（1K=1024，1M=1024K）。"

#: src/usage_text.h:146
msgid ""
" --enable-direct-io[=true|false] Enable directI/O, which lowers cpu usage "
"while\n"
"                              allocating files.\n"
"                              Turn off if you encounter any error"
msgstr ""
" --enable-direct-io[=true|false] 启用直接I/O，在分配文件空间时，\n"
"                              这可以降低CPU负载。\n"
"                              如果遇到任何错误，请关闭。"

#: src/usage_text.h:150
msgid ""
" --allow-overwrite=true|false Restart download from scratch if the\n"
"                              corresponding control file doesn't exist.  "
"See\n"
"                              also --auto-file-renaming option."
msgstr ""

#: src/usage_text.h:154
msgid ""
" --allow-piece-length-change=true|false If false is given, aria2 aborts "
"download\n"
"                              when a piece length is different from one in\n"
"                              a control file. If true is given, you can "
"proceed\n"
"                              but some download progress will be lost."
msgstr ""
" --allow-piece-length-change=true|false 如果选择false，当来自控制文件\n"
"                              中的片段长度不相同时，aria2会放弃下\n"
"                              载。如果选择true，您可以继续进行下\n"
"                              载，但某些下载进度会丢失。"

#: src/usage_text.h:159
msgid ""
" -Z, --force-sequential[=true|false] Fetch URIs in the command-line "
"sequentially\n"
"                              and download each URI in a separate session, "
"like\n"
"                              the usual command-line download utilities."
msgstr ""
" -Z, --force-sequential[=true|false] 继续从命令行获取链接，\n"
"                              并以单独的会话下载每个链接，\n"
"                              如同常见的命令行下载工具。"

#: src/usage_text.h:163
msgid ""
" --auto-file-renaming[=true|false] Rename file name if the same file "
"already\n"
"                              exists. This option works only in http(s)/ftp\n"
"                              download.\n"
"                              The new file name has a dot and a number"
"(1..9999)\n"
"                              appended."
msgstr ""
" --auto-file-renaming[=true|false] 如果相同名称的文件已经存在，\n"
"                              则重命名文件。此选项只能在\n"
"                              http(s)/ftp下载中使用。\n"
"                              新的文件名将被附加一个点和数字\n"
"                              （1至9999）。"

#: src/usage_text.h:169
msgid ""
" -P, --parameterized-uri[=true|false] Enable parameterized URI support.\n"
"                              You can specify set of parts:\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              Also you can specify numeric sequences with "
"step\n"
"                              counter:\n"
"                              http://host/image[000-100:2].img\n"
"                              A step counter can be omitted.\n"
"                              If all URIs do not point to the same file, "
"such\n"
"                              as the second example above, -Z option is\n"
"                              required."
msgstr ""
" -P, --parameterized-uri[=true|false] 启用对有参数URI的支持。\n"
"                              您可以指定某些部分：\n"
"                              http://{sv1,sv2,sv3}/foo.iso\n"
"                              您也可以使用步进计数器指定数\n"
"                              字顺序：\n"
"                              http://host/image[000-100:2].img\n"
"                              步进计数器可以被省略。\n"
"                              如果所有的链接没有指向同一个文件，\n"
"                              就像上面第二个例子一样，则需要-Z\n"
"                              选项。"

#: src/usage_text.h:180
msgid ""
" --enable-http-keep-alive[=true|false] Enable HTTP/1.1 persistent connection."
msgstr " --enable-http-keep-alive[=true|false] 启用HTTP/1.1持续连接。"

#: src/usage_text.h:182
msgid " --enable-http-pipelining[=true|false] Enable HTTP/1.1 pipelining."
msgstr " --enable-http-pipelining[=true|false] 启用HTTP/1.1流水线。"

#: src/usage_text.h:184
msgid ""
" -V, --check-integrity[=true|false] Check file integrity by validating "
"piece\n"
"                              hashes. This option has effect only in "
"BitTorrent\n"
"                              and Metalink downloads with chunk checksums.\n"
"                              Use this option to re-download a damaged "
"portion\n"
"                              of a file. See also --bt-hash-check-seed "
"option."
msgstr ""
" -V, --check-integrity[=true|false] 以验证片段哈希值来检查文件完整性。\n"
"                              此选项仅中BT和Metalink下载中选择\n"
"                              chunk checksum（大块和）时才有效。\n"
"                              使用此选项可以重新下载文件的受损\n"
"                              坏部分。也可以参阅--bt-hash-check-seed选项。"

#: src/usage_text.h:190
msgid ""
" --bt-hash-check-seed[=true|false] If true is given, after hash check using\n"
"                              --check-integrity option and file is "
"complete,\n"
"                              continue to seed file. If you want to check "
"file\n"
"                              and download it only when it is damaged or\n"
"                              incomplete, set this option to false.\n"
"                              This option has effect only on BitTorrent\n"
"                              download."
msgstr ""
" --bt-hash-check-seed[=true|false] 如果选择true，在使用--check-integrityer\n"
"                              选项进行哈希检查后，且文件完整时，\n"
"                              继续提供文件种子。如果您仅仅想检查并下\n"
"                              载文件，当文件被损坏或不完整时，\n"
"                              请设置此选项为false。\n"
"                              此设置仅对BT下载有效。"

#: src/usage_text.h:198
msgid ""
" --realtime-chunk-checksum=true|false  Validate chunk of data by "
"calculating\n"
"                              checksum while downloading a file if chunk\n"
"                              checksums are provided."
msgstr ""
" --realtime-chunk-checksum=true|false 如果提供校验和，下载\n"
"                              文件时以计算检验和的方式\n"
"                              校验数据块。"

#: src/usage_text.h:202
msgid ""
" -c, --continue               Continue downloading a partially downloaded\n"
"                              file. Use this option to resume a download\n"
"                              started by a web browser or another program\n"
"                              which downloads files sequentially from the\n"
"                              beginning. Currently this option is only\n"
"                              applicable to http(s)/ftp downloads."
msgstr ""
" -c, --continue 继续下载部分下载的文件（即续传）。\n"
"                              使用此选项可以从开始部分恢复继续\n"
"                              以前的下载，这些下载通常由网络浏\n"
"                              览器由其它启动。目前，此选项只对\n"
"                              http(s)/ftp下载有效。"

#: src/usage_text.h:209
msgid " -U, --user-agent=USER_AGENT  Set user agent for http(s) downloads."
msgstr " -U, --user-agent=USER_AGENT 为http(s)下载设置用户代理。"

#: src/usage_text.h:211
msgid " -n, --no-netrc               Disables netrc support."
msgstr " -n, --no-netrc 禁止netrc支持。"

#: src/usage_text.h:213
msgid ""
" -i, --input-file=FILE        Downloads URIs found in FILE. You can specify\n"
"                              multiple URIs for a single entity: separate\n"
"                              URIs on a single line using the TAB "
"character.\n"
"                              Reads input from stdin when '-' is specified.\n"
"                              The additional out and dir options can be\n"
"                              specified after each line of URIs. This "
"optional\n"
"                              line must start with white space(s). See "
"INPUT\n"
"                              FILE section of man page for details."
msgstr ""
" -i, --input-file=FILE 下载在FILE中找到的链接。您可以为单个实体指定\n"
"                              多个链接：在同一行中使用TAB制表符\n"
"                              分隔多个链接。指定'-'时则从标准输\n"
"                              入（通常是键盘、鼠标）读取输入。\n"
"                              可以在每行链接的后面指定附加的out\n"
"                              和dir选项。此选项行以空白开始。参\n"
"                              阅man页面的INPUT FILE小节可以了\n"
"                              解详细信息。"

#: src/usage_text.h:222
msgid ""
" -j, --max-concurrent-downloads=N Set maximum number of parallel downloads "
"for\n"
"                              every static (HTTP/FTP) URL, torrent and "
"metalink.\n"
"                              See also -s and -C options."
msgstr ""
" -j, --max-concurrent-downloads=N 为每个静态(HTTP/FTP)链接、torrent\n"
"                              和metalink设置并行下载最大数目。\n"
"                              也可以参阅-s和-C选项。"

#: src/usage_text.h:226
msgid ""
" --load-cookies=FILE          Load Cookies from FILE using the Firefox3 "
"format\n"
"                              and Mozilla/Firefox(1.x/2.x)/Netscape format."
msgstr ""
" --load-cookies=FILE 从FILE中载入Cookies，这些FILE通常使用Firefox3格式\n"
"                              和Mozilla/Firefox(1.x/2.x)/Netscape格式。"

#: src/usage_text.h:229
msgid ""
" --save-cookies=FILE          Save Cookies to FILE in Mozilla/Firefox(1.x/2."
"x)/\n"
"                              Netscape format. If FILE already exists, it "
"is\n"
"                              overwritten. Session Cookies are also saved "
"and\n"
"                              their expiry values are treated as 0."
msgstr ""

#: src/usage_text.h:234
msgid ""
" -S, --show-files             Print file listing of .torrent or .metalink "
"file\n"
"                              and exit. More detailed information will be "
"listed\n"
"                              in case of torrent file."
msgstr ""
" -S, --show-files 打印.torrent或.metalink文件的列表并退出。\n"
"                              更多详细信息将在torrent文件\n"
"                              的实例中列出。"

#: src/usage_text.h:238
msgid ""
" --select-file=INDEX...       Set file to download by specifying its index.\n"
"                              You can find the file index using the\n"
"                              --show-files option. Multiple indexes can be\n"
"                              specified by using ',', for example: \"3,6\".\n"
"                              You can also use '-' to specify a range: "
"\"1-5\".\n"
"                              ',' and '-' can be used together.\n"
"                              When used with the -M option, index may vary\n"
"                              depending on the query(see --metalink-* "
"options)."
msgstr ""
" --select-file=INDEX... 指定文件的索引来设定下载文件。\n"
"                              使用--show-files选项，您可以查\n"
"                              找文件索引。使用','可以指定多\n"
"                              个索引，例如：\"3,6\"。您也可以\n"
"                              使用'-'来指定一个范围：\"1-5\"。\n"
"                              ','和'-'可以一起使用。当使用-M\n"
"                              选项时，索引可以由查询改变\n"
"                              (参阅--metalink-*选项)。"

#: src/usage_text.h:247
msgid " -T, --torrent-file=TORRENT_FILE  The path to the .torrent file."
msgstr " -T, --torrent-file=TORRENT_FILE 指定.torrent文件的路径。"

#: src/usage_text.h:249
msgid ""
" --follow-torrent=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .torrent or content type is\n"
"                              application/x-bittorrent is downloaded, aria2\n"
"                              parses it as a torrent file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a torrent file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""
" --follow-torrent=true|false|mem 如果指定true或mem，当后缀为.torrent\n"
"                              或内容类型是application/x-bittorrent的文\n"
"                              件被下载时，aria2将分析其为torrent文件\n"
"                              并下载其中提及的文件。\n"
"                              \n"
"                              如果指定mem，torrent文件不会被写入\n"
"                              到磁盘，但只保留在内存中。\n"
"                              如果指定false，上面提到的动作\n"
"                              将不会被采取。"

#: src/usage_text.h:259
msgid ""
" --direct-file-mapping=true|false Directly read from and write to each file\n"
"                              mentioned in .torrent file."
msgstr ""
" --direct-file-mapping=true|false 直接读写.torrent文件中\n"
"                              提及的每个文件。"

#: src/usage_text.h:262
msgid ""
" --listen-port=PORT...        Set TCP port number for BitTorrent downloads.\n"
"                              Multiple ports can be specified by using ',',\n"
"                              for example: \"6881,6885\". You can also use "
"'-'\n"
"                              to specify a range: \"6881-6999\". ',' and '-' "
"can\n"
"                              be used together."
msgstr ""
" --listen-port=PORT... 为BT下载设置TCP端口。\n"
"                              使用','可以指定多个端口，例如：\n"
"                              \"6881,6885\"。您也可以使用'-'\n"
"                              指定一个范围：\"6881-6999\"。','\n"
"                              和'-'可以一起使用。"

#: src/usage_text.h:268
msgid ""
" --max-overall-upload-limit=SPEED Set max overall upload speed in bytes/"
"sec.\n"
"                              0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the upload speed per torrent, use\n"
"                              --max-upload-limit option."
msgstr ""

#: src/usage_text.h:274
msgid ""
" -u, --max-upload-limit=SPEED Set max upload speed per each torrent in\n"
"                              bytes/sec. 0 means unrestricted.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K).\n"
"                              To limit the overall upload speed, use\n"
"                              --max-overall-upload-limit option."
msgstr ""
" -u, --max-upload-limit=SPEED 设置每个torrent上传速度最大值（b/s）。\n"
"                              0意味着不限制。\n"
"                              您可以附加K或M（1K=1024，1M=1024K）。\n"
"                              要限制总体上传速度，使用\n"
"                              --max-overall-upload-limit option.选项。"

#: src/usage_text.h:280
msgid ""
" --seed-time=MINUTES          Specify seeding time in minutes. Also see the\n"
"                              --seed-ratio option."
msgstr ""
" --seed-time=MINUTES 指定做种时间（以分钟计）。也可以\n"
"                              参阅--seed-ratio选项。"

#: src/usage_text.h:283
msgid ""
" --seed-ratio=RATIO           Specify share ratio. Seed completed torrents\n"
"                              until share ratio reaches RATIO.\n"
"                              You are strongly encouraged to specify equals "
"or\n"
"                              more than 1.0 here. Specify 0.0 if you intend "
"to\n"
"                              do seeding regardless of share ratio.\n"
"                              If --seed-time option is specified along with\n"
"                              this option, seeding ends when at least one "
"of\n"
"                              the conditions is satisfied."
msgstr ""
" --seed-ratio=RATIO 指定共享比率种子完成torrents，直到共\n"
"                              享比率达到RATIO。支持您\n"
"                              在此指定等于或大于1.0。如\n"
"                              果您愿意不在意共享比率而\n"
"                              做种子，则指定0.0。如果与\n"
"                              此选项同时，指定--seed-time\n"
"                              选项，在链接中至少有一个被\n"
"                              满足时，做种结束。"

#: src/usage_text.h:292
msgid ""
" --peer-id-prefix=PEER_ID_PREFIX Specify the prefix of peer ID. The peer ID "
"in\n"
"                              BitTorrent is 20 byte length. If more than 20\n"
"                              bytes are specified, only first 20 bytes are\n"
"                              used. If less than 20 bytes are specified, "
"random\n"
"                              byte data are added to make its length 20 "
"bytes."
msgstr ""

#: src/usage_text.h:298
msgid " --enable-peer-exchange[=true|false] Enable Peer Exchange extension."
msgstr " --enable-peer-exchange[=true|false] 启用Peer交换扩展。"

#: src/usage_text.h:300
msgid " --enable-dht[=true|false]    Enable IPv4 DHT functionality."
msgstr ""

#: src/usage_text.h:302
msgid ""
" --dht-listen-port=PORT...    Set UDP listening port for both IPv4 and IPv6\n"
"                              DHT. Multiple ports can be specified by using\n"
"                              ',', for example: \"6881,6885\". You can also\n"
"                              use '-' to specify a range: \"6881-6999\". "
"','\n"
"                              and '-' can be used together."
msgstr ""

#: src/usage_text.h:308
msgid ""
" --dht-entry-point=HOST:PORT  Set host and port as an entry point to IPv4 "
"DHT\n"
"                              network."
msgstr ""

#: src/usage_text.h:311
msgid ""
" --dht-file-path=PATH         Change the IPv4 DHT routing table file to PATH."
msgstr ""

#: src/usage_text.h:313
msgid ""
" --bt-min-crypto-level=plain|arc4 Set minimum level of encryption method.\n"
"                              If several encryption methods are provided by "
"a\n"
"                              peer, aria2 chooses the lowest one which "
"satisfies\n"
"                              the given level."
msgstr ""
" --bt-min-crypto-level=plain|arc4 设置加密方法的最小级别。\n"
"                              如果某个peer提供几个加密方法，\n"
"                              aria2会选择满足给定级别中最低\n"
"                              的一个。"

#: src/usage_text.h:318
msgid ""
" --bt-require-crypto=true|false If true is given, aria2 doesn't accept and\n"
"                              establish connection with legacy BitTorrent\n"
"                              handshake. Thus aria2 always uses Obfuscation\n"
"                              handshake."
msgstr ""
" --bt-require-crypto=true|false 如果选择true，aria2将不会\n"
"                              和遗留的握手接受并建立\n"
"                              连接。因此aria2问题使用\n"
"                              模糊握手。"

#: src/usage_text.h:323
msgid ""
" --bt-request-peer-speed-limit=SPEED If the whole download speed of every\n"
"                              torrent is lower than SPEED, aria2 "
"temporarily\n"
"                              increases the number of peers to try for more\n"
"                              download speed. Configuring this option with "
"your\n"
"                              preferred download speed can increase your\n"
"                              download speed in some cases.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --bt-request-peer-speed-limit=SPEED 如果每个torrent的总下载速\n"
"                              度低于SPEED，aria2会临时提高peer\n"
"                              数目来尝试更大的下载速度。使用\n"
"                              您喜欢的下载速度来配置此选项，\n"
"                              在某些时候能够提高下载速度。\n"
"                              \n"
"                              您可以附加K或M（1K=1024，1M=1024K）。"

#: src/usage_text.h:331
msgid ""
" --bt-max-open-files=NUM      Specify maximum number of files to open in "
"each\n"
"                              BitTorrent download."
msgstr ""
" --bt-max-open-files=NUM 指定每个BT下载可以打开的\n"
"                              文件的最多数目。"

#: src/usage_text.h:334
msgid ""
" --bt-seed-unverified[=true|false] Seed previously downloaded files without\n"
"                              verifying piece hashes."
msgstr ""
" --bt-seed-unverified[=true|false] 不验证片段的哈希值，直接以上\n"
"                              一个下载文件做种子。"

#: src/usage_text.h:337
msgid ""
" --bt-max-peers=NUM           Specify the maximum number of peers per "
"torrent.\n"
"                              0 means unlimited.\n"
"                              See also --bt-request-peer-speed-limit option."
msgstr ""
" --bt-max-peers=NUM 指定每个torrent的peer的最大数目。\n"
"                              0意味着不限制。\n"
"                              也可以参阅--bt-request-peer-speed-limit选项。"

#: src/usage_text.h:341
msgid ""
" -M, --metalink-file=METALINK_FILE The file path to the .metalink file. "
"Reads\n"
"                              input from stdin when '-' is specified."
msgstr ""

#: src/usage_text.h:344
msgid ""
" -C, --metalink-servers=NUM_SERVERS The number of servers to connect to\n"
"                              simultaneously. Some Metalinks regulate the\n"
"                              number of servers to connect. aria2 strictly\n"
"                              respects them. This means that if Metalink "
"defines\n"
"                              the maxconnections attribute lower than\n"
"                              NUM_SERVERS, then aria2 uses the value of\n"
"                              maxconnections attribute instead of "
"NUM_SERVERS.\n"
"                              See also -s and -j options."
msgstr ""
" -C, --metalink-servers=NUM_SERVERS 同时连接的服务器数目。\n"
"                              有些Metalink对连接的服务器数目\n"
"                              有要求。aria2严格遵守这些要求。\n"
"                              这意味着如果Metalink定义的最大\n"
"                              连接数目低于NUM_SERVERS，\n"
"                              aria2将以定义的最大连接数目代\n"
"                              替NUM_SERVERS。\n"
"                              也可以参阅-s和-j选项。"

#: src/usage_text.h:353
msgid " --metalink-version=VERSION   The version of the file to download."
msgstr " --metalink-version=VERSION 要下载的文件的版本。"

#: src/usage_text.h:355
msgid " --metalink-language=LANGUAGE The language of the file to download."
msgstr " --metalink-language=LANGUAGE 要下载的文件的语言。"

#: src/usage_text.h:357
msgid ""
" --metalink-os=OS             The operating system of the file to download."
msgstr " --metalink-os=OS 要下载的文件的操作系统。"

#: src/usage_text.h:359
msgid ""
" --metalink-location=LOCATION[,...] The location of the preferred server.\n"
"                              A comma-delimited list of locations is\n"
"                              acceptable."
msgstr ""
" --metalink-location=LOCATION[,...] 首选服务器的位置。\n"
"                              可以使用以英文逗号分隔\n"
"                              位置的列表。"

#: src/usage_text.h:363
msgid ""
" --metalink-preferred-protocol=PROTO Specify preferred protocol. Specify "
"'none'\n"
"                              if you don't have any preferred protocol."
msgstr ""
" --metalink-preferred-protocol=PROTO 指定首选的协议。如果没\n"
"                              有首选协议，请指定'none'。"

#: src/usage_text.h:366
msgid ""
" --follow-metalink=true|false|mem If true or mem is specified, when a file\n"
"                              whose suffix is .metalink or content type of\n"
"                              application/metalink+xml is downloaded, aria2\n"
"                              parses it as a metalink file and downloads "
"files\n"
"                              mentioned in it.\n"
"                              If mem is specified, a metalink file is not\n"
"                              written to the disk, but is just kept in "
"memory.\n"
"                              If false is specified, the action mentioned "
"above\n"
"                              is not taken."
msgstr ""

#: src/usage_text.h:376
msgid ""
" --metalink-enable-unique-protocol=true|false If true is given and several\n"
"                              protocols are available for a mirror in a "
"metalink\n"
"                              file, aria2 uses one of them.\n"
"                              Use --metalink-preferred-protocol option to\n"
"                              specify the preference of protocol."
msgstr ""
" --metalink-enable-unique-protocol=true|false 如果给定true，并且metalink中的"
"几个协议\n"
"                              有效对于镜像， \n"
"                              aria2将使用其中之一。\n"
"                              使用--metalink-preferred-protocol选项可\n"
"                              以指定协议的首选项。"

#: src/usage_text.h:382
msgid " -v, --version                Print the version number and exit."
msgstr " -v, --version 打印版本号并退出。"

#: src/usage_text.h:384
msgid ""
" -h, --help[=TAG|KEYWORD]     Print usage and exit.\n"
"                              The help messages are classified with tags. A "
"tag\n"
"                              starts with \"#\". For example, type \"--"
"help=#http\"\n"
"                              to get the usage for the options tagged with\n"
"                              \"#http\". If non-tag word is given, print the "
"usage\n"
"                              for the options whose name includes that word."
msgstr ""

#: src/usage_text.h:391
msgid " --no-conf                    Disable loading aria2.conf file."
msgstr " --no-conf 禁止加载aria2.conf文件。"

#: src/usage_text.h:393
msgid ""
" --conf-path=PATH             Change the configuration file path to PATH."
msgstr " --conf-path=PATH 将配置文件的路径修改为PATH的值。"

#: src/usage_text.h:395
msgid ""
" --stop=SEC                   Stop application after SEC seconds has "
"passed.\n"
"                              If 0 is given, this feature is disabled."
msgstr ""
" --stop=SEC 在经过SEC秒之后停止程序。\n"
"                              如果给定的值是0，此功能将被禁止。"

#: src/usage_text.h:398
msgid ""
" --header=HEADER              Append HEADER to HTTP request header. You can "
"use\n"
"                              this option repeatedly to specify more than "
"one\n"
"                              header:\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"
msgstr ""
" --header=HEADER 附加HEADER到HTTP请求header。您可以\n"
"                              重复使用此选项来指定多个\n"
"                              header，比如：\n"
"                              aria2c --header=\"X-A: b78\" --header=\"X-B: "
"9J1\"\n"
"                              http://host/file"

#: src/usage_text.h:404
msgid " -q, --quiet[=true|false]     Make aria2 quiet(no console output)."
msgstr " -q, --quiet[=true|false] 使aria2安静（即不在控制台输出）。"

#: src/usage_text.h:406
msgid " --async-dns[=true|false]     Enable asynchronous DNS."
msgstr " --async-dns[=true|false] 启用异步DNS。"

#: src/usage_text.h:408
msgid " --ftp-reuse-connection[=true|false] Reuse connection in FTP."
msgstr " --ftp-reuse-connection[=true|false] 重新使用FTP中的链接。"

#: src/usage_text.h:410
msgid ""
" --summary-interval=SEC       Set interval to output download progress "
"summary.\n"
"                              Setting 0 suppresses the output."
msgstr ""
" --summary-interval=SEC 设置下载过程摘要的输出间隔。\n"
"                              设置0会禁止输出。"

#: src/usage_text.h:413
msgid " --log-level=LEVEL            Set log level to output."
msgstr " --log-level=LEVEL 设置输出的日志级别。"

#: src/usage_text.h:415
msgid ""
" -R, --remote-time[=true|false] Retrieve timestamp of the remote file from "
"the\n"
"                              remote HTTP/FTP server and if it is "
"available,\n"
"                              apply it to the local file."
msgstr ""
" -R, --remote-time[=true|false] 从远程HTTP/FTP服务器检索远程\n"
"                              文件的时间戳以及其是否有效，将\n"
"                              之应用到本地文件。"

#: src/usage_text.h:419
msgid ""
" --connect-timeout=SEC        Set the connect timeout in seconds to "
"establish\n"
"                              connection to HTTP/FTP/proxy server. After "
"the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --timeout option is used instead."
msgstr ""
" --connect-timeout=SEC 设置建立到HTTP/FTP/代理服务器的\n"
"                              链接超时（以秒计）。在链\n"
"                              接建立之后，此选项将失效\n"
"                              并以--timeout选项替代。"

#: src/usage_text.h:424
msgid ""
" --max-file-not-found=NUM     If aria2 receives `file not found' status from "
"the\n"
"                              remote HTTP/FTP servers NUM times without "
"getting\n"
"                              a single byte, then force the download to "
"fail.\n"
"                              Specify 0 to disable this option.\n"
"                              This options is effective only when using\n"
"                              HTTP/FTP servers."
msgstr ""
" --max-file-not-found=NUM 如果aria2从远程HTTP/FTP服务器收到\n"
"                              `未发现文件'状态达到NUM次，没\n"
"                              有下载到1byte，则强制结束下载。\n"
"                              指定0则禁止此选项。\n"
"                              此选项仅在使用HTTP/FTP服务器\n"
"                              时有效。"

#: src/usage_text.h:431
msgid ""
" --uri-selector=SELECTOR      Specify URI selection algorithm.\n"
"                              If 'inorder' is given, URI is tried in the "
"order\n"
"                              appeared in the URI list.\n"
"                              If 'feedback' is given, aria2 uses download "
"speed\n"
"                              observed in the previous downloads and choose\n"
"                              fastest server in the URI list. This also\n"
"                              effectively skips dead mirrors. The observed\n"
"                              download speed is a part of performance "
"profile\n"
"                              of servers mentioned in --server-stat-of and\n"
"                              --server-stat-if options.\n"
"                              If 'adaptive' is given, selects one of the "
"best\n"
"                              mirrors for the first and reserved "
"connections.\n"
"                              For supplementary ones, it returns mirrors "
"which\n"
"                              has not been tested yet, and if each of them "
"has\n"
"                              already been tested, returns mirrors which has "
"to\n"
"                              be tested again. Otherwise, it doesn't select\n"
"                              anymore mirrors. Like 'feedback', it uses a\n"
"                              performance profile of servers."
msgstr ""
" --uri-selector=SELECTOR 指定URI选择算法。\n"
"                              如果给定'inorder'，将以URI列表\n"
"                              中显示的顺序尝试URI。\n"
"                              如果给定'feedback'，aria2将使用\n"
"                              在上个下载中监测到的下载速度并\n"
"                              选择URI列表中最快的服务器。这\n"
"                              也可以有效地跳过死镜像。监测到\n"
"                              的下载速度是--server-stat-of和\n"
"                              --server-stat-if选项中提到的服务\n"
"                              器性能配置文件的一部分。\n"
"                              如果给定'adaptive'，则为第一个\n"
"                              和保留的链接选择最好的镜像。\n"
"                              对于追回的一个，将返回未经测试\n"
"                              的镜像，并且，如果如果它们中的\n"
"                              每一个都经过测，则返回经过再次\n"
"                              测试的镜像。否则，不再选择镜像。\n"
"                              就像'feedback'，将使用服务器的\n"
"                              性能配置文件。"

#: src/usage_text.h:450
msgid ""
" --server-stat-of=FILE        Specify the filename to which performance "
"profile\n"
"                              of the servers is saved. You can load saved "
"data\n"
"                              using --server-stat-if option."
msgstr ""
" --server-stat-of=FILE 指定服务器保存的性能配置文件的名称。\n"
"                              您也可以使用--server-stat-if\n"
"                              选项加载保存的数据。"

#: src/usage_text.h:454
msgid ""
" --server-stat-if=FILE        Specify the filename to load performance "
"profile\n"
"                              of the servers. The loaded data will be used "
"in\n"
"                              some URI selector such as 'feedback'.\n"
"                              See also --uri-selector option"
msgstr ""
" --server-stat-if=FILE 指定要加载的服务器的性能配置文件的名称。\n"
"                              加载的数据将被用在\n"
"                              某些URI选择器之中，比如'feedback'。\n"
"                              也可以参阅--uri-selector选项"

#: src/usage_text.h:459
msgid ""
" --server-stat-timeout=SEC    Specifies timeout in seconds to invalidate\n"
"                              performance profile of the servers since the "
"last\n"
"                              contact to them."
msgstr ""
" --server-stat-timeout=SEC 指定自从上次连接服务器以\n"
"                              来，废止性能配置文件\n"
"                              的超时（以秒计）。"

#: src/usage_text.h:463
msgid ""
" --auto-save-interval=SEC     Save a control file(*.aria2) every SEC "
"seconds.\n"
"                              If 0 is given, a control file is not saved "
"during\n"
"                              download. aria2 saves a control file when it "
"stops\n"
"                              regardless of the value."
msgstr ""

#: src/usage_text.h:468
msgid ""
" --certificate=FILE           Use the client certificate in FILE.\n"
"                              The certificate must be in PEM format.\n"
"                              You may use --private-key option to specify "
"the\n"
"                              private key."
msgstr ""

#: src/usage_text.h:473
msgid ""
" --private-key=FILE           Use the private key in FILE.\n"
"                              The private key must be decrypted and in PEM\n"
"                              format. See also --certificate option."
msgstr ""

#: src/usage_text.h:477
msgid ""
" --ca-certificate=FILE        Use the certificate authorities in FILE to "
"verify\n"
"                              the peers. The certificate file must be in "
"PEM\n"
"                              format and can contain multiple CA "
"certificates.\n"
"                              Use --check-certificate option to enable\n"
"                              verification."
msgstr ""

#: src/usage_text.h:483
msgid ""
" --check-certificate[=true|false] Verify the peer using certificates "
"specified\n"
"                              in --ca-certificate option."
msgstr ""

#: src/usage_text.h:486
msgid ""
" --no-proxy=DOMAINS           Specify comma separated hostnames, domains or\n"
"                              network address with or without CIDR block "
"where\n"
"                              proxy should not be used."
msgstr ""

#: src/usage_text.h:490
msgid ""
" --use-head[=true|false]      Use HEAD method for the first request to the "
"HTTP\n"
"                              server."
msgstr ""

#: src/usage_text.h:493
msgid " --event-poll=POLL            Specify the method for polling events."
msgstr ""

#: src/usage_text.h:495
msgid ""
" --xml-rpc-listen-port=PORT   Specify a port number for XML-RPC server to "
"listen\n"
"                              to."
msgstr ""

#: src/usage_text.h:498
msgid ""
" --enable-xml-rpc[=true|false] Enable XML-RPC server.\n"
"                              It is strongly recommended to set username "
"and\n"
"                              password using --xml-rpc-user and --xml-rpc-"
"passwd\n"
"                              option. See also --xml-rpc-listen-port option."
msgstr ""

#: src/usage_text.h:503
msgid ""
" --xml-rpc-max-request-size=SIZE Set max size of XML-RPC request. If aria2\n"
"                              detects the request is more than SIZE bytes, "
"it\n"
"                              drops connection."
msgstr ""

#: src/usage_text.h:507
msgid " --xml-rpc-user=USER          Set XML-RPC user."
msgstr ""

#: src/usage_text.h:509
msgid " --xml-rpc-passwd=PASSWD      Set XML-RPC password."
msgstr ""

#: src/usage_text.h:511
msgid ""
" --bt-external-ip=IPADDRESS   Specify the external IP address to report to "
"a\n"
"                              BitTorrent tracker. Although this function is\n"
"                              named 'external', it can accept any kind of "
"IP\n"
"                              addresses."
msgstr ""

#: src/usage_text.h:516
msgid ""
" --http-auth-challenge[=true|false] Send HTTP authorization header only when "
"it\n"
"                              is requested by the server. If false is set, "
"then\n"
"                              authorization header is always sent to the "
"server.\n"
"                              There is an exception: if username and "
"password\n"
"                              are embedded in URI, authorization header is\n"
"                              always sent to the server regardless of this\n"
"                              option."
msgstr ""

#: src/usage_text.h:524
msgid ""
" -O, --index-out=INDEX=PATH   Set file path for file with index=INDEX. You "
"can\n"
"                              find the file index using the --show-files "
"option.\n"
"                              PATH is a relative path to the path specified "
"in\n"
"                              --dir option. You can use this option "
"multiple\n"
"                              times."
msgstr ""

#: src/usage_text.h:530
msgid ""
" --dry-run[=true|false]       If true is given, aria2 just checks whether "
"the\n"
"                              remote file is available and doesn't download\n"
"                              data. This option has effect on HTTP/FTP "
"download.\n"
"                              BitTorrent downloads are canceled if true is\n"
"                              specified."
msgstr ""

#: src/usage_text.h:536
msgid ""
" --bt-tracker-interval=SEC    Set the interval in seconds between tracker\n"
"                              requests. This completely overrides interval "
"value\n"
"                              and aria2 just uses this value and ignores "
"the\n"
"                              min interval and interval value in the "
"response of\n"
"                              tracker. If 0 is set, aria2 determines "
"interval\n"
"                              based on the response of tracker and the "
"download\n"
"                              progress."
msgstr ""

#: src/usage_text.h:544
msgid ""
" --on-download-complete=COMMAND Set the command to be executed when "
"download\n"
"                              completes.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""

#: src/usage_text.h:550
msgid ""
" --on-download-start=COMMAND  Set the command to be executed when download\n"
"                              starts up. COMMAND must take just one argument "
"and\n"
"                              GID is passed to COMMAND as a first argument."
msgstr ""

#: src/usage_text.h:554
msgid ""
" --on-download-pause=COMMAND  Set the command to be executed when download\n"
"                              is paused.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""

#: src/usage_text.h:559
msgid ""
" --on-download-error=COMMAND  Set the command to be executed when download\n"
"                              aborts due to error.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND.\n"
"                              See also --on-download-stop option."
msgstr ""

#: src/usage_text.h:565
msgid ""
" --on-download-stop=COMMAND   Set the command to be executed when download\n"
"                              stops. You can override the command to be "
"executed\n"
"                              for particular download result using\n"
"                              --on-download-complete and --on-download-"
"error. If\n"
"                              they are specified, command specified in this\n"
"                              option is not executed.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""

#: src/usage_text.h:574
msgid ""
" --bt-stop-timeout=SEC        Stop BitTorrent download if download speed is "
"0 in\n"
"                              consecutive SEC seconds. If 0 is given, this\n"
"                              feature is disabled."
msgstr ""

#: src/usage_text.h:578
msgid ""
" --xml-rpc-listen-all[=true|false] Listen incoming XML-RPC requests on all\n"
"                              network interfaces. If false is given, listen "
"only\n"
"                              on local loopback interface."
msgstr ""

#: src/usage_text.h:582
msgid ""
" --bt-prioritize-piece=head[=SIZE],tail[=SIZE] Try to download first and "
"last\n"
"                              pieces of each file first. This is useful for\n"
"                              previewing files. The argument can contain 2\n"
"                              keywords:head and tail. To include both "
"keywords,\n"
"                              they must be separated by comma. These "
"keywords\n"
"                              can take one parameter, SIZE. For example, if\n"
"                              head=SIZE is specified, pieces in the range "
"of\n"
"                              first SIZE bytes of each file get higher "
"priority.\n"
"                              tail=SIZE means the range of last SIZE bytes "
"of\n"
"                              each file. SIZE can include K or M(1K = 1024, "
"1M =\n"
"                              1024K). If SIZE is omitted, SIZE=1M is used."
msgstr ""

#: src/usage_text.h:594
msgid ""
" --interface=INTERFACE        Bind sockets to given interface. You can "
"specify\n"
"                              interface name, IP address and hostname."
msgstr ""

#: src/usage_text.h:597
msgid " --disable-ipv6[=true|false]  Disable IPv6."
msgstr ""

#: src/usage_text.h:599
msgid ""
" --bt-save-metadata[=true|false] Save metadata as .torrent file. This option "
"has\n"
"                              effect only when BitTorrent Magnet URI is "
"used.\n"
"                              The filename is hex encoded info hash with "
"suffix\n"
"                              .torrent. The directory to be saved is the "
"same\n"
"                              directory where download file is saved. If "
"the\n"
"                              same file already exists, metadata is not "
"saved.\n"
"                              See also --bt-metadata-only option."
msgstr ""

#: src/usage_text.h:607
msgid ""
" --http-no-cache[=true|false] Send Cache-Control: no-cache and Pragma: no-"
"cache\n"
"                              header to avoid cached content.  If false is\n"
"                              given, these headers are not sent and you can "
"add\n"
"                              Cache-Control header with a directive you "
"like\n"
"                              using --header option."
msgstr ""

#: src/usage_text.h:613
msgid ""
" --bt-metadata-only[=true|false] Download metadata only. The file(s) "
"described\n"
"                              in metadata will not be downloaded. This "
"option\n"
"                              has effect only when BitTorrent Magnet URI is\n"
"                              used. See also --bt-save-metadata option."
msgstr ""

#: src/usage_text.h:618
msgid ""
" --human-readable[=true|false] Print sizes and speed in human readable "
"format\n"
"                              (e.g., 1.2Ki, 3.4Mi) in the console readout."
msgstr ""

#: src/usage_text.h:621
msgid " --bt-enable-lpd[=true|false] Enable Local Peer Discovery."
msgstr ""

#: src/usage_text.h:623
msgid ""
" --bt-lpd-interface=INTERFACE Use given interface for Local Peer Discovery. "
"If\n"
"                              this option is not specified, the default\n"
"                              interface is chosen. You can specify "
"interface\n"
"                              name and IP address."
msgstr ""

#: src/usage_text.h:628
msgid ""
" --reuse-uri[=true|false]     Reuse already used URIs if no unused URIs are\n"
"                              left."
msgstr ""

#: src/usage_text.h:631
msgid " --all-proxy-user=USER        Set user for --all-proxy option."
msgstr ""

#: src/usage_text.h:633
msgid " --all-proxy-passwd=PASSWD    Set password for --all-proxy option."
msgstr ""

#: src/usage_text.h:635
msgid " --http-proxy-user=USER       Set user for --http-proxy option."
msgstr ""

#: src/usage_text.h:637
msgid " --http-proxy-passwd=PASSWD   Set password for --http-proxy option."
msgstr ""

#: src/usage_text.h:639
msgid " --https-proxy-user=USER      Set user for --https-proxy option."
msgstr ""

#: src/usage_text.h:641
msgid " --https-proxy-passwd=PASSWD  Set password for --https-proxy option."
msgstr ""

#: src/usage_text.h:643
msgid " --ftp-proxy-user=USER        Set user for --ftp-proxy option."
msgstr ""

#: src/usage_text.h:645
msgid " --ftp-proxy-passwd=PASSWD    Set password for --ftp-proxy option."
msgstr ""

#: src/usage_text.h:647
msgid ""
" --remove-control-file[=true|false] Remove control file before download. "
"Using\n"
"                              with --allow-overwrite=true, download always\n"
"                              starts from scratch. This will be useful for\n"
"                              users behind proxy server which disables "
"resume."
msgstr ""

#: src/usage_text.h:652
msgid ""
" --always-resume[=true|false] Always resume download. If true is given, "
"aria2\n"
"                              always tries to resume download and if resume "
"is\n"
"                              not possible, aborts download. If false is "
"given,\n"
"                              when all given URIs do not support resume or\n"
"                              aria2 encounters N URIs which does not "
"support\n"
"                              resume (N is the value specified using\n"
"                              --max-resume-failure-tries option), aria2\n"
"                              downloads file from scratch.\n"
"                              See --max-resume-failure-tries option."
msgstr ""

#: src/usage_text.h:662
msgid ""
" --max-resume-failure-tries=N When used with --always-resume=false, aria2\n"
"                              downloads file from scratch when aria2 detects "
"N\n"
"                              number of URIs that does not support resume. "
"If N\n"
"                              is 0, aria2 downloads file from scratch when "
"all\n"
"                              given URIs do not support resume.\n"
"                              See --always-resume option."
msgstr ""

#: src/usage_text.h:669
msgid " --bt-tracker-timeout=SEC     Set timeout in seconds."
msgstr ""

#: src/usage_text.h:671
msgid ""
" --bt-tracker-connect-timeout=SEC Set the connect timeout in seconds to\n"
"                              establish connection to tracker. After the\n"
"                              connection is established, this option makes "
"no\n"
"                              effect and --bt-tracker-timeout option is "
"used\n"
"                              instead."
msgstr ""

#: src/usage_text.h:677
msgid " --dht-message-timeout=SEC    Set timeout in seconds."
msgstr ""

#: src/usage_text.h:679
msgid ""
" --http-accept-gzip[=true|false] Send 'Accept: deflate, gzip' request "
"header\n"
"                              and inflate response if remote server "
"responds\n"
"                              with 'Content-Encoding: gzip' or\n"
"                              'Content-Encoding: deflate'."
msgstr ""

#: src/usage_text.h:684
msgid ""
" --save-session=FILE          Save error/unfinished downloads to FILE on "
"exit.\n"
"                              You can pass this output file to aria2c with -"
"i\n"
"                              option on restart. Please note that downloads\n"
"                              added by aria2.addTorrent and aria2."
"addMetalink\n"
"                              XML-RPC method are not saved."
msgstr ""

#: src/usage_text.h:690
#, fuzzy
msgid ""
" -x, --max-connection-per-server=NUM The maximum number of connections to "
"one\n"
"                              server for each download."
msgstr ""
" --bt-max-open-files=NUM 指定每个BT下载可以打开的\n"
"                              文件的最多数目。"

#: src/usage_text.h:693
#, fuzzy
msgid ""
" -k, --min-split-size=SIZE    aria2 does not split less than 2*SIZE byte "
"range.\n"
"                              For example, let's consider downloading 20MiB\n"
"                              file. If SIZE is 10M, aria2 can split file "
"into 2\n"
"                              range [0-10MiB) and [10MiB-20MiB) and download "
"it\n"
"                              using 2 sources(if --split >= 2, of course).\n"
"                              If SIZE is 15M, since 2*15M > 20MiB, aria2 "
"does\n"
"                              not split file and download it using 1 "
"source.\n"
"                              You can append K or M(1K = 1024, 1M = 1024K)."
msgstr ""
" --bt-request-peer-speed-limit=SPEED 如果每个torrent的总下载速\n"
"                              度低于SPEED，aria2会临时提高peer\n"
"                              数目来尝试更大的下载速度。使用\n"
"                              您喜欢的下载速度来配置此选项，\n"
"                              在某些时候能够提高下载速度。\n"
"                              \n"
"                              您可以附加K或M（1K=1024，1M=1024K）。"

#: src/usage_text.h:702
msgid ""
" --conditional-get[=true|false] Download file only when the local file is "
"older\n"
"                              than remote file. Currently, this function "
"has\n"
"                              many limitations. See man page for details."
msgstr ""

#: src/usage_text.h:706
msgid ""
" --on-bt-download-complete=COMMAND For BitTorrent, a command specified in\n"
"                              --on-download-complete is called when "
"download\n"
"                              completes and seeding is over. On the other "
"hand,\n"
"                              this option sets the command to be executed "
"when\n"
"                              download completes but before seeding.\n"
"                              See --on-download-start option for the\n"
"                              requirement of COMMAND."
msgstr ""

#: src/usage_text.h:714
msgid ""
" --enable-async-dns6[=true|false] Enable IPv6 name resolution in "
"asynchronous\n"
"                              DNS resolver. This option will be ignored "
"when\n"
"                              --async-dns=false."
msgstr ""

#: src/usage_text.h:718
msgid ""
" --enable-dht6[=true|false]   Enable IPv6 DHT functionality.\n"
"                              Use --dht-listen-port option to specify port\n"
"                              number to listen on. See also --dht-listen-"
"addr6\n"
"                              option."
msgstr ""

#: src/usage_text.h:723
msgid ""
" --dht-listen-addr6=ADDR      Specify address to bind socket for IPv6 DHT. \n"
"                              It should be a global unicast IPv6 address of "
"the\n"
"                              host."
msgstr ""

#: src/usage_text.h:727
msgid ""
" --dht-entry-point6=HOST:PORT Set host and port as an entry point to IPv6 "
"DHT\n"
"                              network."
msgstr ""

#: src/usage_text.h:730
msgid ""
" --dht-file-path6=PATH        Change the IPv6 DHT routing table file to PATH."
msgstr ""

#: src/usage_text.h:732
msgid ""
" --bt-tracker=URI[,...]       Comma separated list of additional BitTorrent\n"
"                              tracker's announce URI. These URIs are not\n"
"                              affected by --bt-exclude-tracker option "
"because\n"
"                              they are added after URIs in --bt-exclude-"
"tracker\n"
"                              option are removed."
msgstr ""

#: src/usage_text.h:738
msgid ""
" --bt-exclude-tracker=URI[,...] Comma separated list of BitTorrent "
"tracker's\n"
"                              announce URI to remove. You can use special "
"value\n"
"                              '*' which matches all URIs, thus removes all\n"
"                              announce URIs. When specifying '*' in shell\n"
"                              command-line, don't forget to escape or quote "
"it.\n"
"                              See also --bt-tracker option."
msgstr ""

#: src/usage_text.h:745
msgid ""
" --max-download-result=NUM    Set maximum number of download result kept in\n"
"                              memory. The download results are completed/"
"error/\n"
"                              removed downloads. The download results are "
"stored\n"
"                              in FIFO queue and it can store at most NUM\n"
"                              download results. When queue is full and new\n"
"                              download result is created, oldest download "
"result\n"
"                              is removed from the front of the queue and new "
"one\n"
"                              is pushed to the back. Setting big number in "
"this\n"
"                              option may result high memory consumption "
"after\n"
"                              thousands of downloads. Specifying 0 means no\n"
"                              download result is kept."
msgstr ""

#: src/version_usage.cc:57
msgid " version "
msgstr ""

#: src/version_usage.cc:80
#, c-format
msgid "Report bugs to %s"
msgstr ""

#: src/version_usage.cc:85
msgid ""
"Usage: aria2c [OPTIONS] [URI | MAGNET | TORRENT_FILE | METALINK_FILE]..."
msgstr ""

#: src/version_usage.cc:92
msgid "Printing all options."
msgstr ""

#: src/version_usage.cc:94
#, c-format
msgid "Printing options tagged with '%s'."
msgstr ""

#: src/version_usage.cc:98
#, c-format
msgid "See -h option to know other command-line options(%s)."
msgstr ""

#: src/version_usage.cc:103 src/version_usage.cc:115
msgid "Options:"
msgstr ""

#: src/version_usage.cc:112
#, c-format
msgid "Printing options whose name includes '%s'."
msgstr ""

#: src/version_usage.cc:120
#, c-format
msgid "No option matching with '%s'."
msgstr ""

#: src/version_usage.cc:128
msgid ""
" You can specify multiple HTTP(S)/FTP URIs. Unless you specify -Z option, "
"all\n"
" URIs must point to the same file or downloading will fail."
msgstr ""

#: src/version_usage.cc:130
msgid ""
" You can also specify arbitrary number of BitTorrent Magnet URIs, torrent/\n"
" metalink files stored in a local drive. Please note that they are always\n"
" treated as a separate download."
msgstr ""

#: src/version_usage.cc:135
msgid ""
" You can specify both torrent file with -T option and URIs. By doing this,\n"
" download a file from both torrent swarm and HTTP/FTP server at the same "
"time,\n"
" while the data from HTTP/FTP are uploaded to the torrent swarm. For single "
"file\n"
" torrents, URI can be a complete URI pointing to the resource or if URI "
"ends\n"
" with '/', 'name' in torrent file is added. For multi-file torrents, 'name' "
"and\n"
" 'path' in torrent are added to form a URI for each file."
msgstr ""

#: src/version_usage.cc:142
msgid ""
" Make sure that URI is quoted with single(') or double(\") quotation if it\n"
" contains \"&\" or any characters that have special meaning in shell."
msgstr ""

#: src/version_usage.cc:152
msgid "Refer to man page for more information."
msgstr ""

#: src/message.h:57
#, c-format
msgid "GID#%s - Download has already completed: %s"
msgstr ""

#: src/message.h:106
#, c-format
msgid "Unrecognized URI or unsupported protocol: %s"
msgstr ""

#: src/message.h:107
#, c-format
msgid "Tracker returned warning message: %s"
msgstr ""

#: src/message.h:108
#, c-format
msgid "The segment file %s exists."
msgstr ""

#: src/message.h:109
#, c-format
msgid "The segment file %s does not exist."
msgstr ""

#: src/message.h:110
#, c-format
msgid "Saving the segment file %s"
msgstr ""

#: src/message.h:111
msgid "The segment file was saved successfully."
msgstr ""

#: src/message.h:112
#, c-format
msgid "Loading the segment file %s."
msgstr ""

#: src/message.h:113
msgid "The segment file was loaded successfully."
msgstr ""

#: src/message.h:114
msgid "No URI to download. Download aborted."
msgstr ""

#: src/message.h:115
#, c-format
msgid ""
"File %s exists, but a control file(*.aria2) does not exist. Download was "
"canceled in order to prevent your file from being truncated to 0. If you are "
"sure to download the file all over again, then delete it or add --allow-"
"overwrite=true option and restart aria2."
msgstr ""

#: src/message.h:116
#, c-format
msgid "Allocating file %s, %s bytes"
msgstr ""

#: src/message.h:117
msgid "File not found"
msgstr ""

#: src/message.h:118
msgid "Not a directory"
msgstr ""

#: src/message.h:119
#, c-format
msgid "Insufficient checksums. checksumLength=%d, numChecksum=%d"
msgstr ""

#: src/message.h:120
#, c-format
msgid "Writing file %s"
msgstr ""

#: src/message.h:121
msgid "No peer list received."
msgstr ""

#: src/message.h:122
#, c-format
msgid "Adding peer %s:%d"
msgstr ""

#: src/message.h:123
#, c-format
msgid "Deleting used piece index=%d, fillRate(%%)=%d<=%d"
msgstr ""

#: src/message.h:124
msgid "Download of selected files was complete."
msgstr ""

#: src/message.h:125
msgid "The download was complete."
msgstr ""

#: src/message.h:126
#, c-format
msgid "Removed %lu have entries."
msgstr ""

#: src/message.h:127
#, c-format
msgid "Validating file %s"
msgstr ""

#: src/message.h:128
#, c-format
msgid "%ld seconds to allocate %s byte(s)"
msgstr ""

#: src/message.h:131
#, c-format
msgid "Metalink: Queueing %s for download."
msgstr ""

#: src/message.h:132
#, c-format
msgid "Download complete: %s"
msgstr ""

#: src/message.h:133
msgid "Seeding is over."
msgstr ""

#: src/message.h:134
msgid "No chunk to verify."
msgstr ""

#: src/message.h:135
#, c-format
msgid "Good chunk checksum. hash=%s"
msgstr ""

#: src/message.h:136
#, c-format
msgid "Failed to load cookies from %s"
msgstr ""

#: src/message.h:137
#, c-format
msgid ""
".netrc file %s does not have correct permissions. It should be 600. netrc "
"support disabled."
msgstr ""

#: src/message.h:138
msgid "Logging started."
msgstr ""

#: src/message.h:139
msgid "Specify at least one URL."
msgstr ""

#: src/message.h:140
msgid "daemon failed."
msgstr ""

#: src/message.h:141
#, c-format
msgid "Verification finished successfully. file=%s"
msgstr ""

#: src/message.h:142
#, c-format
msgid "Checksum error detected. file=%s"
msgstr ""

#: src/message.h:143
#, c-format
msgid "Incomplete range specified. %s"
msgstr ""

#: src/message.h:144
#, c-format
msgid "Failed to convert string into value: %s"
msgstr ""

#: src/message.h:145
msgid "Resource not found"
msgstr ""

#: src/message.h:146
#, c-format
msgid "File already exists. Renamed to %s."
msgstr ""

#: src/message.h:147
msgid "Cannot parse metalink XML file. XML may be malformed."
msgstr ""

#: src/message.h:148
#, c-format
msgid "Too small payload size for %s, size=%lu."
msgstr ""

#: src/message.h:149
#, c-format
msgid ""
"Removed the defunct control file %s because the download file %s doesn't "
"exist."
msgstr ""

#: src/message.h:150
#, c-format
msgid "Your share ratio was %.1f, uploaded/downloaded=%sB/%sB"
msgstr ""

#: src/message.h:151
#, c-format
msgid "Missing %s in torrent metainfo."
msgstr ""

#: src/message.h:152
msgid "Tracker returned null data."
msgstr ""

#: src/message.h:153
msgid "Windows socket library initialization failed"
msgstr ""

#: src/message.h:154
#, c-format
msgid "%ld second(s) has passed. Stopping application."
msgstr ""

#: src/message.h:155
#, c-format
msgid ""
"Saved signature as %s. Please note that aria2 doesn't verify signatures."
msgstr ""

#: src/message.h:157
#, c-format
msgid "Saving signature as %s failed. Maybe file already exists."
msgstr ""

#: src/message.h:160
#, c-format
msgid "Failed to open ServerStat file %s for read."
msgstr ""

#: src/message.h:161
#, c-format
msgid "ServerStat file %s loaded successfully."
msgstr ""

#: src/message.h:162
#, c-format
msgid "Failed to read ServerStat from %s."
msgstr ""

#: src/message.h:165
#, c-format
msgid "Failed to open ServerStat file %s for write."
msgstr ""

#: src/message.h:166
#, c-format
msgid "ServerStat file %s saved successfully."
msgstr ""

#: src/message.h:167
#, c-format
msgid "Failed to write ServerStat to %s."
msgstr ""

#: src/message.h:170
#, c-format
msgid "Failed to establish connection, cause: %s"
msgstr ""

#: src/message.h:171
#, c-format
msgid "Network problem has occurred. cause:%s"
msgstr ""

#: src/message.h:173
#, c-format
msgid "Failed to load trusted CA certificates from %s. Cause: %s"
msgstr ""

#: src/message.h:175
#, c-format
msgid ""
"Certificate verification failed. Cause: %s See --ca-certificate and --check-"
"certificate option."
msgstr ""

#: src/message.h:177
msgid "No certificate found."
msgstr ""

#: src/message.h:178
msgid "Hostname not match."
msgstr ""

#: src/message.h:179
msgid "No files to download."
msgstr ""

#: src/message.h:181
msgid ""
"You may encounter the certificate verification error with HTTPS server. See "
"--ca-certificate and --check-certificate option."
msgstr ""

#: src/message.h:183
#, c-format
msgid "Printing the contents of file '%s'..."
msgstr ""

#: src/message.h:184
msgid "This file is neither Torrent nor Metalink file. Skipping."
msgstr ""

#: src/message.h:189
#, c-format
msgid "Is '%s' a file?"
msgstr ""

#: src/message.h:190
#, c-format
msgid "Failed to find given interface %s, cause: %s"
msgstr ""

#: src/message.h:192
#, c-format
msgid "Saved metadata as %s."
msgstr ""

#: src/message.h:193
#, c-format
msgid "Saving metadata as %s failed. Maybe file already exists."
msgstr ""

#: src/message.h:195
#, c-format
msgid "Detected directory traversal directive in %s"
msgstr ""

#: src/message.h:199
msgid "Timeout."
msgstr ""

#: src/message.h:200
msgid "Invalid chunk size."
msgstr ""

#: src/message.h:201
#, c-format
msgid "Too large chunk. size=%d"
msgstr ""

#: src/message.h:202
msgid "Invalid header."
msgstr ""

#: src/message.h:203
msgid "Invalid response."
msgstr ""

#: src/message.h:204
msgid "No header found."
msgstr ""

#: src/message.h:205
msgid "No status header."
msgstr ""

#: src/message.h:206
msgid "Proxy connection failed."
msgstr ""

#: src/message.h:207
msgid "Connection failed."
msgstr ""

#: src/message.h:208
#, c-format
msgid ""
"The requested filename and the previously registered one are not same. "
"Expected:%s Actual:%s"
msgstr ""

#: src/message.h:209
#, c-format
msgid "The response status is not successful. status=%d"
msgstr ""

#: src/message.h:210
#, c-format
msgid "Too large file size. size=%s"
msgstr ""

#: src/message.h:211
#, c-format
msgid "Transfer encoding %s is not supported."
msgstr ""

#: src/message.h:212
#, c-format
msgid "SSL initialization failed: %s"
msgstr ""

#: src/message.h:213
msgid "SSL I/O error"
msgstr ""

#: src/message.h:214
msgid "SSL protocol error"
msgstr ""

#: src/message.h:215
#, c-format
msgid "SSL unknown error %d"
msgstr ""

#: src/message.h:216
#, c-format
msgid "SSL initialization failed: OpenSSL connect error %d"
msgstr ""

#: src/message.h:217
#, c-format
msgid "Size mismatch Expected:%s Actual:%s"
msgstr ""

#: src/message.h:218
msgid "Authorization failed."
msgstr ""

#: src/message.h:219
msgid "Got EOF from the server."
msgstr ""

#: src/message.h:220
msgid "Got EOF from peer."
msgstr ""

#: src/message.h:221
msgid "Malformed meta info."
msgstr ""

#: src/message.h:223
#, c-format
msgid "Failed to open the file %s, cause: %s"
msgstr ""

#: src/message.h:224
#, c-format
msgid "Failed to write into the file %s, cause: %s"
msgstr ""

#: src/message.h:225
#, c-format
msgid "Failed to read from the file %s, cause: %s"
msgstr ""

#: src/message.h:226
msgid "Failed to read data from disk."
msgstr ""

#: src/message.h:227
#, c-format
msgid "Failed to calculate SHA1 digest of or a part of the file %s, cause: %s"
msgstr ""

#: src/message.h:228
#, c-format
msgid "Failed to seek the file %s, cause: %s"
msgstr ""

#: src/message.h:229
#, c-format
msgid "The offset is out of range, offset=%s"
msgstr ""

#: src/message.h:230
#, c-format
msgid "%s is not a directory."
msgstr ""

#: src/message.h:231
#, c-format
msgid "Failed to make the directory %s, cause: %s"
msgstr ""

#: src/message.h:232
#, c-format
msgid "Failed to open the segment file %s, cause: %s"
msgstr ""

#: src/message.h:233
#, c-format
msgid "Failed to write into the segment file %s, cause: %s"
msgstr ""

#: src/message.h:234
#, c-format
msgid "Failed to read from the segment file %s, cause: %s"
msgstr ""

#: src/message.h:236
#, c-format
msgid "Failed to open a socket, cause: %s"
msgstr ""

#: src/message.h:237
#, c-format
msgid "Failed to set a socket option, cause: %s"
msgstr ""

#: src/message.h:238
#, c-format
msgid "Failed to set a socket as blocking, cause: %s"
msgstr ""

#: src/message.h:239
#, c-format
msgid "Failed to set a socket as non-blocking, cause: %s"
msgstr ""

#: src/message.h:240
#, c-format
msgid "Failed to bind a socket, cause: %s"
msgstr ""

#: src/message.h:241
#, c-format
msgid "Failed to listen to a socket, cause: %s"
msgstr ""

#: src/message.h:242
#, c-format
msgid "Failed to accept a peer connection, cause: %s"
msgstr ""

#: src/message.h:243
#, c-format
msgid "Failed to get the name of socket, cause: %s"
msgstr ""

#: src/message.h:244
#, c-format
msgid "Failed to get the name of connected peer, cause: %s"
msgstr ""

#: src/message.h:245
#, c-format
msgid "Failed to resolve the hostname %s, cause: %s"
msgstr ""

#: src/message.h:246
#, c-format
msgid "Failed to connect to the host %s, cause: %s"
msgstr ""

#: src/message.h:247
#, c-format
msgid "Failed to check whether the socket is writable, cause: %s"
msgstr ""

#: src/message.h:248
#, c-format
msgid "Failed to check whether the socket is readable, cause: %s"
msgstr ""

#: src/message.h:249
#, c-format
msgid "Failed to send data, cause: %s"
msgstr ""

#: src/message.h:250
#, c-format
msgid "Failed to receive data, cause: %s"
msgstr ""

#: src/message.h:251
#, c-format
msgid "Failed to peek data, cause: %s"
msgstr ""

#: src/message.h:252
#, c-format
msgid "Unknown socket error %d (0x%x)"
msgstr ""

#: src/message.h:253
#, c-format
msgid "File %s exists, but %s does not exist."
msgstr ""

#: src/message.h:255
#, c-format
msgid "Invalid payload size for %s, size=%lu. It should be %lu."
msgstr ""

#: src/message.h:256
#, c-format
msgid "Invalid ID=%d for %s. It should be %d."
msgstr ""

#: src/message.h:257
#, c-format
msgid ""
"Chunk checksum validation failed. checksumIndex=%lu, offset=%s, expectedHash="
"%s, actualHash=%s"
msgstr ""

#: src/message.h:258
msgid "Download aborted."
msgstr ""

#: src/message.h:259
#, c-format
msgid "File %s is being downloaded by other command."
msgstr ""

#: src/message.h:260
msgid "Insufficient checksums."
msgstr ""

#: src/message.h:261
#, c-format
msgid "Tracker returned failure reason: %s"
msgstr ""

#: src/message.h:262
msgid "Flooding detected."
msgstr ""

#: src/message.h:264
#, c-format
msgid ""
"Drop connection because no request/piece messages were exchanged in a "
"certain period(%ld seconds)."
msgstr ""

#: src/message.h:266
msgid "The infoHash in torrent file doesn't match to one in .aria2 file."
msgstr ""

#: src/message.h:267
#, c-format
msgid "No such file entry %s"
msgstr ""

#: src/message.h:268
#, c-format
msgid "Too slow Downloading speed: %d <= %d(B/s), host:%s"
msgstr ""

#: src/message.h:269
msgid "No HttpRequestEntry found."
msgstr ""

#: src/message.h:270
#, c-format
msgid "Got %d status, but no location header provided."
msgstr ""

#: src/message.h:271
#, c-format
msgid "Invalid range header. Request: %s-%s/%s, Response: %s-%s/%s"
msgstr ""

#: src/message.h:272
msgid "No file matched with your preference."
msgstr ""

#: src/message.h:273
msgid "Exception caught"
msgstr "捕捉到异常"

#: src/message.h:274
#, c-format
msgid "Max payload length exceeded or invalid. length = %u"
msgstr ""

#: src/message.h:275
#, c-format
msgid "Invalid file length. Cannot continue download %s: local %s, remote %s"
msgstr "无效的文件长度。不能继续下载%s：本地%s，远程%s"

#: src/BtSetup.cc:212
msgid "Errors occurred while binding port.\n"
msgstr "绑定端口时发生错误。\n"